Commit graph

221 commits

Author SHA1 Message Date
John Crispin
d8981133b2 mac80211: make rtl8xxxu buils again
we only wanted to drop rtl8xxxue support

Signed-off-by: John Crispin <john@phrozen.org>
2018-06-26 16:00:33 +02:00
John Crispin
66c5696cdf mac80211: rtl8xxxu: drop support patches
After a very enlightening but unfortunately far too short exchange with Jes
we mutually agreed to drop the patches. They are unfortunately not ready
yet.

Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: John Crispin <john@phrozen.org>
2018-06-26 15:45:30 +02:00
Stijn Tintel
34e22653ac mac80211: enable ath10k LED support by default
Commit 61d57a2f88 adds ath10k LED
support, but doesn't add an option to actually enable it.

After enabling this option, a LED named ath10k-phy0 appears in sysfs,
and a trigger can be assigned to it. Since 60deb3cdef the default set
trigger is the tpt one.

Enable it by default, as most devices using ath10k chips shouldn't be
severely space-constrained. There are likely many devices that can
benefit from having it enabled, like my testing device.

Before:
   text    data     bss     dec     hex filename
 245311    8899      16  254226   3e112 ath10k_core.ko

After:
   text    data     bss     dec     hex filename
 245979    8899      16  254894   3e3ae ath10k_core.ko

Tested on a D-Link DAP-2695-A1 (ar71xx).

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-06-25 22:00:05 +02:00
Sven Eckelmann
4270847a2c mac80211: ath10k: Allow to enable the thermal code of ath10k
Some ath10k firmware versions allow to access the chip internal a
temperature sensor and allow to reduce the amount of the time when the card
is allowed to send. The latter is required on devices which tend to
overheat.

An userspace service has to read
/sys/class/ieee80211/phy*/device/hwmon/hwmon*/temp1_input regularly and
then decide how much the device has to be throttled. This can be done by
writing to /sys/class/ieee80211/phy*/device/cooling_device/cur_state. By
default it is not throttled (0) but it can be throttled up to 100(%).

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-06-09 16:32:39 +02:00
Daniel Golle
f4a639a3d7 mac80211: rt2x00: no longer use TXOP_BACKOFF for probe frames
Import a revert-commit from Stanislaw Gruszka which significantly
improves WiFi performance on rt2x00 based hardware.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-28 15:49:41 +02:00
John Crispin
83fb9ec5e0 ath79: make ahb wifi work
Signed-off-by: John Crispin <john@phrozen.org>
2018-05-24 15:43:39 +02:00
Daniel Golle
96f4792fdb mac80211: refactor non-{sae,dfs} mesh initialization
Refactor mesh initialization into a separate function, do some cleaning
on the way to make the code more readable.
Changes:
 * Move iw mesh setup to new mac80211_setup_mesh()
 * fallback on 'ssid' parameter in case 'mesh_id' isn't set
 * move setting of freq variable to shared code as it is needed for
   both, the wpa_supplicant and the iw based setup.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-15 02:05:56 +02:00
Sven Eckelmann
547042398a mac80211: Re-enable encrypted 11s meshpoint
The commit 574e4377fa ("mac80211: properly setup mesh interface") uses
the variable $wpa to decide whether encrypted meshpoint is requested by the
user or not. But the variable $wpa will only be set correctly after the
function wireless_vif_parse_encryption is called.

Fixes: 574e4377fa ("mac80211: properly setup mesh interface")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-05-14 18:37:44 +02:00
Daniel Golle
574e4377fa mac80211: properly setup mesh interface
Setup wpa_supplicant for encrypted mesh or when using DFS channels and
adjust interface setup to pass fixed frequency for mesh mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-14 09:48:58 +02:00
Sandeep Sheriker Mallikarjun
441c26da6a kernel: fix build error for external kernel.
fixed build error when external kernel is selected from menuconfig.
The patches present in target/linux/generic does not gets applied
to external kernel and build fails while compiling mac82011 &
regmap-core kernel modules. as a fix added check in Makefile for
CONFIG_EXTERNAL_KERNEL_TREE present or not.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2018-05-07 10:31:35 +02:00
Daniel Golle
465d4bc538 mac80211: pass down noscan to wpa_supplicant
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-04-20 07:52:19 +02:00
Stefan Lippers-Hollmann
8267a0b234 mac80211: ipw2200-fw: fix download mirror(s)
bughost.org hasn't existed for 6-8 years, add a couple of current
mirrors to avoid the fallback to http://mirror2.openwrt.org/sources/.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2018-04-18 23:57:20 +02:00
Stefan Lippers-Hollmann
18fe577530 mac80211: ipw2100-fw: fix download mirror(s)
bughost.org hasn't existed for 6-8 years, add a couple of current
mirrors to avoid the fallback to http://mirror2.openwrt.org/sources/.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2018-04-18 23:57:13 +02:00
Evgeniy Didin
36314c12c0 mac80211: add RedPine RS9113 module support
RedPine RS9113 wireless module requires rsi91x driver to be built
and linux-firmware/rsi/rs9113_wlan_qspi.rps to be installed.
Also we add patch for successful compilation of rsi91x driver.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
2018-04-18 23:56:55 +02:00
John Crispin
54b275c8ed ipq40xx: add target
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: John Crispin <john@phrozen.org>
2018-03-14 19:04:50 +01:00
Hauke Mehrtens
80771af83d mac80211: move wifi detect hotplug script to later
Make it easily possible to add a custom script in front of this hotplug
script which adds new devices. This is needed for the mvebu target in
which we want to migrate the old configuration before new devices are
getting detected.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-13 22:24:56 +01:00
Matthias Schiffer
d58c8f4029
mac80211: revert "wireless: set correct mandatory rate flags"
Revert upstream commit 1bd773c077de "wireless: set correct mandatory rate
flags", as it breaks 11s interoperability: nodes can only associate when
neither or both have this patch. As this is a regression from released
versions, revert to the old code for now.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-26 23:30:23 +01:00
Matthias Schiffer
e9fa0b9f3a
ath9k, ath10k(-ct): move spectral scan support under a separate config symbol
Backport patches that separate spectral scan support from general debugfs
support of ath9k/ath10k; this allows to remove the dependency on
KERNEL_RELAY from these driver packages even with debugfs enabled and
avoids the memory footprint of the relay buffers allocated by ath9k/ath10k
even when they aren't used at all.

The KERNEL_RELAY dependency is moved to a new config symbol that enables
spectral scan support in these drivers.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Luis Araneda
1c139d664b mac80211: enable brcmfmac's SDIO support on sunxi target
Needed to support some SDIO connected cards, like AMPAK modules

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:22 +01:00
Felix Fietkau
f9fa266faf mac80211: update to wireless-testing 2017-11-01
The wireless regdb is now loaded via firmware loading, CRDA support and
built-in regdb support have been removed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-16 15:23:35 +01:00
Jonas Gorski
3689f7c8ef mac80211: ath10k: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-10-27 13:06:15 +02:00
Hauke Mehrtens
08bbb804c8 mac80211: ath6kl: add missing usb-core dependency to kmod-ath6kl-usb
This fixes a build problem with many targets.

Fixes 618ed77a17 ("mac80211: add ath6kl kernel modules")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-15 10:53:46 +02:00
Ben Whitten
618ed77a17 mac80211: add ath6kl kernel modules
Allow board to include the ath6kl kernel modules.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2017-10-15 00:24:21 +02:00
Felix Fietkau
609208597b mac80211: update to wireless-testing 2017-10-06
Rework the code to get rid of some extra kernel module dependencies
introduced in the last update.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-13 11:45:57 +02:00
Hauke Mehrtens
a8f63a0717 mac80211: update to backports-4.14-rc2
This updates mac80211 to backprots-4.14-rc2.
This was compile and runtime tested with ath9k, ath10k and b43
with multiple stations and ieee80211w and in different scenarios by many
other people.

To create the backports-4.14-rc2-1.tar.xz use this repository:
https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git
from tag v4.14-rc2-1

Then run this:
./gentree.py --git-revision v4.14-rc2 --clean  <path to linux repo> ../backports-4.14-rc2-1

This also adapts the ath10k-ct and mt76 driver to the changed cfg80211
APIs and syncs the nl80211.h file in iw with the new version from
backports-4.14-rc2.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 12:49:11 +02:00
Hauke Mehrtens
45d0b88e44 mac80211: make iwlwifi select AC support
Some NICs supported by this driver support ieee80211 AC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-17 15:08:53 +02:00
Hauke Mehrtens
aa00d11526 linux-firmware: pack Intel iwl FW separately
Do not create one big package with all the Intel firmware files
supported by the iwlwifi driver, but use a separate package for each
chip.

This also updates some 7000 and 8000 series firmware files to more
recent version. The older versions shipped are not supported by the
current driver any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-17 15:08:52 +02:00
Lorenzo Santina
fd84ecda7d treewide: fix shellscript syntax errors/typos
Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin <dev@kresin.em>
2017-09-13 08:07:54 +02:00
Felix Fietkau
c6c1f6a548 mac80211: use KERNEL_MAKEOPTS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-06-07 18:31:10 +02:00
Hans Ulli Kroll
ce7681d328 mac80211: add support for rtl8821ae pcie adapter
Add support for Realtek RTL8821AE/RTL8812AE PCIe adapter.
This device supports 802.11ac and bluetooth

testet on PC Engines APU with AP and STA mode

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
2017-05-21 23:51:21 +02:00
Matthias Schiffer
1a16cb9c67
mac80211, hostapd: always explicitly set beacon interval
One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-13 17:12:54 +02:00
Felix Fietkau
00b32b8326 mac80211: fix kconfig recursive dependency warning
Make brcmfmac depend on !TARGET_uml.
Technically, brcmfmac could be built for uml because only SDIO support
won't work on that target. However, selectively avoiding the dependency
propagation of !TARGET_uml from kmod-mmc to avoid including a reference
to BRCMFMAC_SDIO doesn't work.

In practice, brcmfmac is completely useless on uml, so let's just
disable it there.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-18 09:45:18 +02:00
Jonas Gorski
7d4147d869 mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDS
Chaning these symbols require a recompilation of the modules, so make the
system aware of it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-04-12 12:48:35 +02:00
Jonas Gorski
5ba8185866 mac80211: manually apply dependencies to prevent a recoursive one
Apply the !UML dependency to both the symbol and the DEPENDS so there is
no recursive dependency anymore.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-04-12 12:48:35 +02:00
Matthias Fritzsche
796629207b mac80211: conistent wireless.wiki.kernel.org
Change all the URLs to wireless.wiki.kernel.org to have
the same protocol, domain and path.

Signed-off-by: Matthias Fritzsche <txt.file@txtfile.eu>
2017-04-12 10:57:54 +02:00
Christian Lamparter
cc189c0b7f mac80211: enable ath10k AHB support for QCA4019
This patch enables the ATH10K_AHB support for the QCA4019
devices on the AHB bus.

This patch also removes 936-ath10k_skip_otp_check.patch
because it breaks the AHB device identification.
"Patch is wrong. I find it frustrating OpenWRT/LEDE doesn't
try to work with upstream on ixing these things right."

[1] <https://www.mail-archive.com/ath10k@lists.infradead.org/msg05896.html>

It also limits ath10k memory hunger (This is a problem with 128MiB RAM)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-03-22 09:45:18 +01:00
Álvaro Fernández Rojas
d3a2068b8d mac80211: mwifiex-sdio: select DRIVER_11AC_SUPPORT
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-11 19:32:34 +01:00
Álvaro Fernández Rojas
a856c8a824 mac80211: mwifiex-pcie: select DRIVER_11AC_SUPPORT
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-11 19:32:32 +01:00
Álvaro Fernández Rojas
26d1b66895 mac80211: mwifiex-sdio: select kmod-mmc instead of PCI_SUPPORT
Should fix buildbot issues.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-11 19:32:14 +01:00
Henryk Heisig
fb436f49ad mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cards
This adds option to build kernel module and firmware packages
for a Marvell 8887 SDIO Wireless device

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-03-11 14:16:28 +01:00
Yousong Zhou
8d8ef24eeb mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORT
This is required for default wireless configuration of malta target to
work out of the box again.  Fixes "77ece30e: hostapd: Add ability to
specify that that wireless driver supports 802.11ac"

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-02-24 21:35:31 +08:00
Felix Fietkau
649e766a64 mac80211: update to wireless-testing 2017-01-31
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 12:27:12 +01:00
Felix Fietkau
47540afa5d ath9k: add a warning to the tx99 config option
Lots of users try random stuff when they encounter any kind of
difficulty. I've had to debug a number of cases where people had enabled
this option for no reason. Hopefully this warning will reduce the number
of useless support cases.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-02 12:44:38 +01:00
Stijn Tintel
b13e103d71 ath5k: select 802.11w support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-03 20:53:48 +01:00
Felix Fietkau
236bf83bb6 brcmfmac: select 802.11ac support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 12:10:37 +01:00
Alexis Green
8f3d8c0022 mac80211: ath10k specifies that it supports 802.11ac mode
Signed-off-by: Alexis Green <agreen@cococorp.com>
2016-12-20 16:24:22 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Alexey Brodkin
84d57fc485 mac80211: Make wlcore platform-independent
TI wl18xx and wl12xx are Wi-Fi/Bluetooth combo modules
that could be found on different existing boards.

But it is possible to get those modules as a separate
component and use with existing boards as well as
new boards equipped with either module may appear so we
remove dependency on OMAP instead we add dependency on MMC
because this Wi-Fi module uses SDIO interface.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-16 10:54:33 +01:00
Matthias Schiffer
fa845e9978
ath9k: add support for the HSR tuner of the Ubiquiti UAP Outdoor+
Without setting the HSR to the selected channel, the WLAN of the UAP
Outdoor+ will exhibit high packet loss in RX.

Based-on-patch-by: Stefan Rompf <stefan@loplof.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-15 18:54:06 +01:00
Christian Lamparter
5f8f8a3661 base-files, mac80211, broadcom-wl: wifi detection and configuration
Currently, the wifi detection script is executed as part of
the (early) boot process. Pluggable wifi USB devices, which
are inserted at a later time are not automatically
detected and therefore they don't show up in LuCI.

A user has to deal with wifi detection manually, or restart
the router.

However, the current "sleep 1" window - which the boot
process waits for wifi devices to "settle down" - is too
short to detect wifi devices for some routers anyway.

For example, this can happen with USB WLAN devices on the
WNDR4700. This is because the usb controller needs to load
its firmware from UBI and initialize, before it can operate.

The issue can be seen on a BT HomeHub 5A as well as soon as
the caldata are on an ubi volume. This is because the ath9k
card has to be initialized by owl-loader first. Which has to
wait for the firmware extraction script to retrieve the pci
initialization values inside the caldata.

This patch moves the wifi configuration to hotplug scripts.
For mac80211, the wifi configuration will now automatically
run any time a "ieee80211" device is added. Likewise
broadcom-wl's script checks for new "net" devices which
have the "wl$NUMBER" moniker.

Issues with spawning multiple interface configuration - in
case the detection script is run concurrently - have been
resolved by using a named section for the initial
configuration. Concurrent configuration scripts will now
simply overwrite the same existing configuration.

A workaround which preserves the "sleep 1" window for just
the first boot has been added. This allows the existing
brcm47xx boot and mvebu uci-default scripts to correctly
setup the initial mac addresses and regulatory domain.

And finally, the patch renames the "wifi detect" into
"wifi config". As the script no longer produces any output
that has to be redirected or appended to the configuration
file.

Thanks to Martin Blumenstingl for helping with the implementation
and testing of the patch.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:08:01 +01:00