Commit graph

43017 commits

Author SHA1 Message Date
Koen Vandeputte
f7a406deaf kernel: bump 3.18 to 3.18.125
Refreshed all patches.

Compile-tested on: adm5120
Compile-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-14 16:27:43 +01:00
Ted Hess
042d68a195 tools/pkg-config: Handle variable substitution of 'bindir' to redirect to STAGING_DIR/bin
Signed-off-by: Ted Hess <thess@kitschensync.net>
2018-11-13 15:40:30 -05:00
Felix Fietkau
d965f41ac8 mt76: update to the latest version
6745830 mt76: fix race condition in station removal
7e5c819 mt76: add mt76_sta_remove helper
75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev
fd85ff9 mt7603: use mt76_sta_remove helper
0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling
83a80ca mt76: request tx status for powersave released EOSP packet
df5c797 mt76: fix uninitialized mutex access setting rts threshold
0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine
4248446 mt76x0: pci: enable VHT rates in IBSS mode
f75efd8 mt76x2u: phy: add TX_SHAPING calibration
c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch
9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine
3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine
88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-13 21:22:28 +01:00
Felix Fietkau
3879fc2b1a mac80211: fix spurious disconnections with powersave clients
Affects all drivers using ieee80211_tx_status_noskb, e.g. ath9k and mt76

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-13 20:35:29 +01:00
Stijn Tintel
e95e9fcbb2 kernel: bump 4.14 to 4.14.80
Refresh patches.

Compile-tested: ar71xx, ath79, x86/64
Runtime-tested: ar71xx, ath79, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-13 00:44:01 +02:00
Stijn Tintel
43e1b38e4a kernel: drop old bluetooth config symbols
They do not exist in any of the supported kernel versions.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-12 19:11:54 +02:00
Daniel Engberg
a95bef0579 bzip2: Replace main site with mirrors (FS#1913)
Use Gentoo and FreeBSDs distfile caches as mirrors because
main site/domain is abandoned.
Source: https://lwn.net/Articles/762264/

Fixes FS#1913

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-12 17:09:09 +01:00
Daniel Engberg
04f4dd6fa2 tools/cmake: Update to 3.12.4
Update cmake to 3.12.4

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-12 12:04:38 +01:00
Alexander Couzens
81d7f82441
ugps: update to latest git HEAD
07528d43f9bc nmea.c: set _BSD_SOURCE to have timegm() & stime() on musl
b88037b6bf6a check timegm return code
ccabdf6c235f nmea.c: Add null byte to nmea fields
cdc1478a8133 remove deprication warning

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-11-11 02:37:05 +01:00
Petr Štetiar
1b4b942bce Revert "iptables: fix dependency for libip6tc on IPV6"
This patch reverts commit 2dc1f54b12 as it
breaks the build for me on x86-64 if I've IPV6 support disabled. Same config
builds fine on `openwrt-18.06` branch at 55d078b2.

  $ grep IPV6 .config

  # CONFIG_KERNEL_IPV6 is not set
  # CONFIG_IPV6 is not set

Build errors out on:

  Package libiptc is missing dependencies for the following libraries:
  libip6tc.so.0

Looking at iptables-1.6.2/libiptc/Makefile.am:

  libiptc_la_LIBADD   = libip4tc.la libip6tc.la

and to iptables-1.6.2/libiptc/libiptc.pc.in:

  Requires:	libip4tc libip6tc

It seems that libiptc needs v4/v6 libs, so v6 isn't optional.

Cc: Rosy Song <rosysong@rosinson.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-10 18:50:29 +01:00
Hans Dedecker
5617e138bd ethtool: update to 4.19
8a1ad80 Release version 4.19.
ecdf295 ethtool: Fix uninitialized variable use at qsfp dump
98c148e ethtool: better syntax for combinations of FEC modes
d4b9f3f ethtool: support combinations of FEC modes

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-10 13:44:09 +01:00
Rafał Miłecki
0cf32de17c bcm53xx: add DT patch describing pins mux controller
It's needed to support new devices that use specific pin functions.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 22:29:16 +01:00
Felix Fietkau
7dd42aa592 mt76: update to the latest version
ffccb48 mt76: do not wake tx queues during flush

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-09 15:26:44 +01:00
Rafał Miłecki
c7c4ae35d6 kernel: deprecate support for the generic "linux,part-probe" DT binding
It has been rejected upstream and instead a nice/more generic solution
has been implemented. It's possible now to describe partitions format
using "compatible" DT string.

No OpenWrt target uses "linux,part-probe" anymore, leave it only in case
some forks need it. It will be dropped with support for new kernels.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 14:57:45 +01:00
Kevin Darbyshire-Bryant
1a73b2d089 tools: firmware-utils: mksercommfw build on Darwin
asm/byteorder.h & hence __cpu_to_be32() doesn't exist on Darwin

Shamelessly copy some byte swap functions from oseama.c

Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-11-09 13:27:03 +00:00
Rafał Miłecki
9a3c805584 ramips: use separated mtd patch reverting write_page() removal
This helps understanding mtd changes needed to get downstream NAND
driver working.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 13:31:47 +01:00
Daniel Engberg
dbba87aa6a popt: Add main site back to PKG_SOURCE_URL
Main site is back up after weeks of downtime.
Add it back as last resort

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-09 08:50:18 +01:00
Rafał Miłecki
f975ab8f4e bcm53xx: update pinctrl driver
It's upstream now with a one trivial fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 07:41:36 +01:00
Hans Dedecker
c97c672f9b procd: update to latest git HEAD
20192e4 watchdog: improve seting watchdog timeout and frequency

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-08 14:51:33 +01:00
Daniel Golle
217fe505b6 oxnas: remove superseded sysupgrade image check
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-08 14:41:42 +01:00
Daniel Golle
b831eb5363 oxnas: kd20: correct memory size to 256MB
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-08 14:41:42 +01:00
Koen Vandeputte
b4e17a7440 ramips: fix netgear r6120 factory image generation
as indicated in commit c5bf408ed6 "(ramips: fix image generation for mt76x8")
more rework was needed to fix the other issues.

Building on another machine, but using the same arch, showed
the application failing again for different reasons.

Fix this by completely rewriting the application, fixing following found issues:

- buffer overflows, resulting in stack corruption
- flaws in memory requirement calculations (too small, too large)
- memory leaks
- missing bounds checking on string handling
- non-reproducable images, by using unitilized memory in checksum calculation
- missing error handling, resulting in succes on specific image errors
- endianness errors when building on BE machines
- various minor build warnings
- documentation did not match the code actions (header item locations)
- allowing input to be decimal, hex or octal now

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-08 13:32:22 +01:00
Jo-Philipp Wich
d157a76c67 script: ipkg-build: honour $SOURCE_DATE_EPOCH
When the SOURCE_DATE_EPOCH environment variable is set, use it to
override the timestamps of .ipk archive contents.

This ensures that .ipk archives built in environments without SCM
metadata (mainly the SDK) are reproducible between different runs.

Ref: https://github.com/openwrt/packages/issues/6954
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-11-08 11:52:33 +01:00
Hans Dedecker
559635dbb6 iproute2: update to 4.19.0
Update to the latest version of iproute2; see https://lwn.net/Articles/769354/
for a full overview of the changes in 4.19.
Remove 190-add-cake-to-tc patch as CAKE qdisc is now supported in 4.19.0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-08 11:09:13 +01:00
Felix Fietkau
68b43270f9 mt76: update to the latest version, fix a typo
29d9532 mt7603: fix faulty variable initialization in last commit

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-08 09:17:35 +01:00
Felix Fietkau
df1191bcea mt76: update to the latest version
417cf49 mt7603: improve recovery from MCU hang

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-07 20:36:50 +01:00
Rafał Miłecki
4d5b0efc09 mac80211: brcmfmac: backport the last accepted 4.21 changes
It's a typo fix & patch that helps debugging possible WARN-ings.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:17:00 +01:00
Rafał Miłecki
3eab6b8275 mac80211: brcmfmac: backport NVRAM loading improvements
This adds support for storing board specific NVRAM files as firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:11:08 +01:00
Rafał Miłecki
5932eb690f mac80211: brcmfmac: backport firmware loading cleanup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:43:32 +01:00
Rafał Miłecki
b50f162b3c mac80211: brcmfmac: backport the latest 4.20 changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:14:55 +01:00
Rafał Miłecki
f7a3459ab9 mac80211: brcmfmac: rename 4.20 backport patches
Include kernel version to help tracking changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 08:54:16 +01:00
Felix Fietkau
4fd9a5667e mt76: update to the latest version
172f081 mt76x0: do not overwrite other MT_BBP(AGC, 8) fields
2ae2046 mt76x0: phy: use mt76_poll_msec in mt76x0_phy_temp_sensor
add66a0 mt76x0: init: use mt76x02_mac_shared_key_setup in mt76x0_init_hardware
1f24db9 mt76x2: move wcid_tx_rate conf at bootstrap
097b2bd mt76x0: init: use mt76x02_mac_wcid_setup for wcid configuration
d0eb03e mt76x2u: init: remove not useful configuration
c7aa8f4 mt76x2u: init: use common routines for wcid/key initialization
bd568d9 mt76: move mt76x02_eeprom_copy in mt76x02-lib module
57b441d mt76x0: phy: introduce tssi calibration support
a78802c mt76x0: phy: use tssi reported value to configure tx power if available
94ad030 mt76: remove mcu_msg_alloc
15cb426 mt76: remove wait argument from mt76x02_mcu_function_select
cd76a83 mt76: remove wait argument from mt76x02_mcu_set_radio_state
9b97e0f mt76x02: run calibration after scanning
663b197 mt76x02: assure we update gain after scan
eb53745 mt76x0: dfs: fix IBI_R11 configuration on non-radar channels
ef06c30 mt76: avoid queue/status spinlocks while passing tx status to mac80211
5195257 mt7603: fix maximum rx frame size
01815e9 mt7603: use mutex from struct mt76_dev
3c8e8a7 mt7603: use irq_lock/irqmask from struct mt76_dev
8b7f50d mt76: add size check for additional rx fragments
87bad3a mt7603: stop MAC on watchdog reset
c34baab mt7603: add missing unlock in case changing the channel fails
ac6fc78 mt7603: add debugfs file to trigger watchdog resets
d9b5324 mt7603: add SPDX license identifiers
498d716 mt7603: fix checkpatch issues
a1afefd mt7603: fix handling of fixed rate packets
5ee0523 mt7603: fix tx status rate reporting for fixed-rate packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Felix Fietkau
b318edb999 ramips: add missing DTS frequency limit for the 5 GHz radio on Archer C20i
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Koen Vandeputte
7e173b4331 valgrind: bump to 4.14.0
Release notes can be found here:

http://www.valgrind.org/docs/manual/dist.news.html

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 16:34:47 +01:00
Koen Vandeputte
c5bf408ed6 ramips: fix image generation for mt76x8
Buildbot fails to generate images for targets also generating a
Sercomm binary with following error:

Opening file: /mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img.rootfs.zip
Filesize: 3648606 .
mksercommfw: malloc.c:2427: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed.
Makefile:287: recipe for target '/mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img' failed

Debugging using valgrind shows stack corruption due to a buffer overflow.
The author of the generator assumes the filename ends with "root",
while it should be "rootfs".

Fix this by accounting for the 2 missing characters which solves the build issues.

More work is required to cleanup this source, which will be done later on.

Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 15:29:51 +01:00
Koen Vandeputte
74738c4b80 imx6: fix DMA transaction errors
Following errors were seen in the past on imx6 when using serial:

[ 22.617622] imx-uart 2020000.serial: DMA transaction error.
[ 22.623228] imx-uart 2020000.serial: DMA transaction error.
[ 22.628826] imx-uart 2020000.serial: DMA transaction error.
[ 22.648951] imx-uart 2020000.serial: DMA transaction error.
[ 22.654558] imx-uart 2020000.serial: DMA transaction error.
[ 22.660156] imx-uart 2020000.serial: DMA transaction error.

Which is the reason why DMA for the serial ports
got disabled in commits:

efb362cd93 ("imx6: disable dma on uart")
3b4241071d ("imx6: disable UART dma")

As indicated on mailinglist discussion, the cause seems to be
the usage of very old SDMA firmware which is present in the soc:

[    0.624302] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[    0.624318] imx-sdma 20ec000.sdma: Falling back to user helper
[   64.531607] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware

This patch adds the new firmware binary. (2196 bytes)

It is required to embed the binary into the kernel image, as it
gets loaded very early in the boot process where the rootfs is not
available yet:

[    0.622966] imx-sdma 20ec000.sdma: loaded firmware 3.3

Extended testing shows that the DMA errors are not seen anymore
when using this newer firmware version.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Koen Vandeputte
5ac34818f9 ath9k: fix dynack in IBSS mode
Currently, dynack was only tested upstream using AP/STA mode.
Testing it on IBSS, showed that late-ack detection was broken.

This is caused due to dynack using Association Request/Response
frames for late-ack detection, which IBSS does not use.
Also allowing Authentication frames here solves this.

A second issue also got fixed, which was also seen AP/STA mode:

When a station was added, the estimated value would be exponentially averaged
using 0 as a starting point.

This means that on larger distances, the ack timeout was still not high
enough before synchronizing would run out of late-ack's for estimation.

Fix this by using the initial estimated value as a baseline
and only start averaging in the following estimation rounds.

Test setup:
- 2x identical devices:  RB912UAG-5HPnD + 19dB sector
- IBSS
- 2x2 802.11an (ar9340), HT20, long GI
- RSSI's  -70 / -71
- Real distance: 23910 meter

Results (60s iperf runs):

Fixed coverage class 54 (up to 24300m):
* 21.5 Mbits/sec

Dynack:
* 28.9 Mbits/sec

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Koen Vandeputte
860de2e1aa ar71xx: disable some tiny targets with kernel 4.14
The bump to kernel 4.14 caused a massive increase in kernel size.

For most targets, switching them to dynamic partitioning allowed
to cope with this.

On some targets, the kernel partition is located behind the rootfs,
which disallows switching to dynamic partitioning as the boot location
would be altered, requiring a u-boot change.

Also within the tiny section, which disables kernel symbols etc
to decrease the image size,  the partition size is still too small.

Disable these targets for now, fixing image generation:

- Buffalo BHR-4GRV2
- Zbtlink ZBT-WE1526

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:06 +01:00
Koen Vandeputte
c764b2b531 kernel: bump 4.14 to 4.14.79
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:00 +01:00
Hans Dedecker
69734416d2 glibc: update to latest 2.27 commit (BZ#23709,BZ#23822)
d8eee5ef55 x86: Fix Haswell CPU string flags (BZ#23709)
5cd5309d91 i64: fix missing exp2f, log2f and powf symbols in libm.a [BZ #23822]
1759ea197b conform: XFAIL siginfo_t si_band test on sparc64

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-05 14:22:17 +01:00
Hannu Nyman
f1ed7747bb tools/bison: update to version 3.2
Update bison to version 3.2

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-11-05 14:04:26 +01:00
David Bauer
5896b146a4 ipq40xx: fix NBG6617 LED mapping
The NBG6617's LEDs are wrongly identified in the 01_leds boardinit
script (board instead of boardname), resulting in referencing
non-existent LEDs in UCI.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-05 02:30:00 +00:00
Daniel Golle
9bcc08958b oxnas: add console=ttyS0,115200 argument to bootargs
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:37 +01:00
Daniel Golle
cf7896117b oxnas: enable image metadata by setting SUPPORTED_DEVICES
For each board, set the legacy name as well as the new based on the
compatible-string from devicetree.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:37 +01:00
Daniel Golle
ef9b169df0 oxnas: remove stray kernel config symbols
CONFIG_CRYPTO_* shouldn't be set by the target

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:36 +01:00
Daniel Golle
4f017c871d oxnas: switch to generic board detect
remove /lib/oxnas.sh platform-specific board-detection and use
generic which is based on device-tree compatible node instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:36 +01:00
Alexander Couzens
900005ee75
iperf: allow non-ipv6 builds
Add configure argument --disable-ipv6 when ipv6 is deselected.
Add fix-non-ipv6-builds.patch as long there is no new upstream
release.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-11-03 02:36:24 +01:00
Martin Weinelt
0411813c6f
ramips: fix leds on GL.iNet GL-MT300N-V2
The WAN LED now shows the link state. It's color is green,
not blue.

Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
2018-11-02 21:43:15 +01:00
Hans Dedecker
c9f5934c71 curl: noop commit to refer CVEs fixed in 7.62.0
When bumping Curl to 7.62.0 in commit 278e4eba09 I did not include the fixed
CVEs in the commit message; this commit fixes this.

The following CVEs were fixed in 7.62.0 :

CVE-2018-16839
CVE-2018-16840
CVE-2018-16842

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-02 13:16:13 +01:00
Christian Lamparter
dceee8cc09 ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00