Commit graph

22530 commits

Author SHA1 Message Date
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
2012-08-22 09:10:24 +00:00
Jo-Philipp Wich
ba15f1784c comgt: handle service mode for Huawai modems (#12039)
It seems that the comgt package does not handle the Huawei 3G USB dongle E176 correctly (and probably other Huawei dongles too). My dongle appears as ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem and 3G/UMTS
connections work well. However, no connection is established if only 2G/GPRS is available: the pppd chat script fails with NO CARRIER although the dongle is registered to the network (via 2G). As outlined in  this wiki or  this
blog, Huawei chips use the AT^SYSCFG command to set 2G or 3G mode, which is not implemented in comgt at the moment. Thus I wrote a patch for /lib/network/3g.sh which adds support for the "service" option in the network
configuration with Huawei dongles. By default (if no "service" option is specified) also 2G is used when 3G is unavailable. The Huawei dongle is detected analogously to other chips (the output of gcom -d /dev/ttyUSB0 -s
/etc/gcom/getcardinfo.gcom is scanned for huawei).

Some further information: The AT^SYSCFG command seems to be respected only once after the dongle is attached (or after the host is powered up). Resetting the dongle seems to render the serial port unusable in some cases.
However, the patch sets a useful mode by default which should cover most use cases (3G preferred, but 2G allowed) and if 3G-only or 2G-only mode is required the device can be power cycled.

SVN-Revision: 33212
2012-08-19 15:59:24 +00:00
Hauke Mehrtens
3133d4d8de remove unused file
SVN-Revision: 33210
2012-08-18 15:45:18 +00:00
Hauke Mehrtens
9eaee85cc2 make brcm47xx build only with bcma or only with ssb support.
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.

SVN-Revision: 33209
2012-08-18 14:08:35 +00:00
Hauke Mehrtens
f4d6baf498 update gpio patches
SVN-Revision: 33208
2012-08-18 11:51:35 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
Gabor Juhos
25ac1447ed tools/firmware-utils: add tool for DIR-651-H1 firmware generation
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33204
2012-08-17 17:56:02 +00:00
Gabor Juhos
182a18a369 ar71xx: setup WLAN LED for the TL-WA901ND v2
Closes #11889.

SVN-Revision: 33202
2012-08-16 07:11:30 +00:00
Jo-Philipp Wich
febf63f3c4 acx-mac80211: depend on mipsel, not mips since AR7 is low endian
SVN-Revision: 33201
2012-08-16 01:24:46 +00:00
Jo-Philipp Wich
9d58d538e1 iwinfo: add hwinfo for Rt3052
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33200
2012-08-15 20:22:35 +00:00
Jo-Philipp Wich
82f298b9f1 iwinfo: add hw info support for Rt3xxx SoCs
This takes the device_id and subsystem_id from the EEPROM, I'll add
the info for other Rt3xxx chips in the next days.

[jow: minor whitespace changes]

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33199
2012-08-15 16:25:38 +00:00
Felix Fietkau
4769dd7237 ath5k: add back a patch for fixing eeprom rate power parsing
SVN-Revision: 33198
2012-08-15 14:49:59 +00:00
Jo-Philipp Wich
12b3909f1b make static host utility linking default to off
SVN-Revision: 33197
2012-08-15 13:31:31 +00:00
Jo-Philipp Wich
a062e08bb4 use bundle-libraries.sh to install required host utilities into imagebuilder staging tree
SVN-Revision: 33196
2012-08-15 13:28:26 +00:00
Jo-Philipp Wich
183f625a48 add a helper script to bundle required libraries for host utilities
SVN-Revision: 33195
2012-08-15 13:28:23 +00:00
Gabor Juhos
bd00d48fe2 package/om-watchdog: start service only on the om2p/om2p-lc boards on ar71xx
If the package is installed, it starts the watchdog daemon
on every ar71xx based board.

SVN-Revision: 33194
2012-08-15 13:27:55 +00:00
Gabor Juhos
5d84dabf0f generic: extend pci_isable_usb_common_quirks patch
Fixes the following build error:
  SYSMAP  System.map
  Building modules, stage 2.
  MODPOST 48 modules
ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined!
ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2

SVN-Revision: 33193
2012-08-15 13:26:51 +00:00
John Crispin
76954dc8b0 set xen images to gzip compression, fixes #11970
SVN-Revision: 33192
2012-08-15 09:20:12 +00:00
Florian Fainelli
a183ced08e MCS8140 actually selects CPU_ARM926T
Should make inclusion for other MCS814x SoCs easier

SVN-Revision: 33188
2012-08-14 16:19:30 +00:00
Jo-Philipp Wich
23d73bf051 iwinfo: add some Atheros cards
These are two Atheros modules we are using, just for the cosmetics to make them
show up with the proper names in LuCI.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33186
2012-08-14 13:58:49 +00:00
John Crispin
5f8ffb8873 fixes gpio_dev un/reload balancing
Signed-off-by: SHI Bin <shibin@ctsing.com>

SVN-Revision: 33183
2012-08-14 12:32:11 +00:00
Jo-Philipp Wich
1af7a2c522 wrt350nv2-builder: don't use internal zlib macro OF() in ioapi.h, it breaks with new zlib releases
SVN-Revision: 33181
2012-08-14 10:33:43 +00:00
Jo-Philipp Wich
e54e4d50d1 iwinfo: transparently handle radioX names in madwifi backend
SVN-Revision: 33180
2012-08-14 10:33:40 +00:00
John Crispin
4fffc38827 fix breakage when compiling for armv6
SVN-Revision: 33179
2012-08-14 10:13:39 +00:00
Florian Fainelli
25792cb971 generic: enhanced image Makefile
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use

Signed-off by: Matthias Buecher <mail@maddes.net>

SVN-Revision: 33174
2012-08-13 14:46:47 +00:00
Gabor Juhos
5fc4b7f5fd ar71xx: uci-defaults/leds for ALL0258N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33165
2012-08-13 14:01:38 +00:00
Gabor Juhos
ca857b7a50 base-files: uci-defaults for rssileds
Adds capability to add uci-defaults defining RSSI LEDs

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33164
2012-08-13 14:01:37 +00:00
Gabor Juhos
02cf95877e new package: rssileds daemon
rssileds is a small user-space process to control LEDs by polling the
signal quality reported by a WiFi interface. By using the iwinfo library,
rssileds is independent of the WiFi driver used.
It supports pwm controlled LEDs and may by used to nicely fade through
all colors in real-time of the rainbow while only wasting very little CPU
time and a small constant amount of system memory.
An example configuration for the ALL0258N will follow in the next patch.

This is a slightly improved version of rssileds, now quality values are
in percent and stuff is written to syslog.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33163
2012-08-13 14:01:34 +00:00
John Crispin
2214277630 dependencies break when alsa is staged
SVN-Revision: 33162
2012-08-13 12:45:36 +00:00
John Crispin
e6e331ca67 unify tapi deps
SVN-Revision: 33160
2012-08-13 11:08:13 +00:00
Florian Fainelli
fb2db91797 busybox: enable fsync applet by default
SVN-Revision: 33159
2012-08-13 09:55:12 +00:00
Florian Fainelli
f164b71189 leds: do not register device if no leds defined
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
Florian Fainelli
f0f10014a0 BCM6358 fix enet MII clk definitions
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
Florian Fainelli
9b91c62917 nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
Jo-Philipp Wich
29b91ef01a introduce a menuconfig option to turn off static linking of host utilities
SVN-Revision: 33154
2012-08-13 00:26:34 +00:00
John Crispin
8c3ea37f2f 3rd time lucky ... too much sun today
SVN-Revision: 33152
2012-08-12 20:01:04 +00:00
John Crispin
21e5f332dc unbreak deps
SVN-Revision: 33151
2012-08-12 19:59:51 +00:00
John Crispin
0e0a4932b1 breaks when building for powerpc
SVN-Revision: 33150
2012-08-12 18:38:59 +00:00
Jo-Philipp Wich
7304953292 convert remaining tools to $(HOST_STATIC_LINKING) (#12012)
SVN-Revision: 33148
2012-08-12 13:27:49 +00:00
Jo-Philipp Wich
70aaa116eb base-files: provide a sysupgrade -r (--restore-backup) option as convenience wrapper for tar -C / -x(v)zf
SVN-Revision: 33147
2012-08-12 13:20:27 +00:00
Jo-Philipp Wich
958a9c96cd xz: update to 5.0.4
Signed-off-by: Jonh Wendell <jonh.wendell@gmail.com>

SVN-Revision: 33146
2012-08-12 12:48:49 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
Jo-Philipp Wich
9a049babb7 tools/ppl: fix automake error due to use of obsolete directory name
I recently experienced this:

configure.ac:1101: the top level
interfaces/Prolog/Ciao/Makefile.am:168: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/GNU/Makefile.am:167: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/SICStus/Makefile.am:71: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/SWI/Makefile.am:187: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/XSB/Makefile.am:186: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/YAP/Makefile.am:176: `pkglibdir' is not a legitimate directory for `DATA'
make[4]: *** [Makefile.in] Error 1

Found this on google:
http://bugs.mysql.com/bug.php?id=63898

And used this to fix it:
fgrep -rlZ pkglib_DATA --include Makefile.am . | xargs -0 sed -i 's/pkglib_DATA/pkgdata_DATA/g'

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33141
2012-08-12 12:46:47 +00:00
Jo-Philipp Wich
cf1698c637 use HOST_STATIC_LINKING instead of hardcoding -static
SVN-Revision: 33140
2012-08-12 12:34:30 +00:00
Jo-Philipp Wich
095fe8743b prereq-build.mk: do not perform static linking tests on Darwin
SVN-Revision: 33139
2012-08-12 12:34:28 +00:00
Jo-Philipp Wich
94a96244f6 host-build.mk: define a variable HOST_STATIC_LINKING which is set to "-static" on non-Darwin systems
SVN-Revision: 33138
2012-08-12 12:34:25 +00:00