Commit graph

636 commits

Author SHA1 Message Date
John Crispin
cc831e23e1 ar71xx: add proper support for Archer-C7 V2
This has minor differences to the V1

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-14 21:26:08 +02:00
P.Wassi
8307c2fe68 ar71xx: Add support for Ubiquiti UniFi AP AC PRO
Add support for the Ubiquiti UniFi AP AC PRO
Signed-off-by: P.Wassi <p.wassi at gmx.at>
2016-05-12 03:29:36 +02:00
P.Wassi
c855e70491 ar71xx: Rename unifiac to unifiac-lite
To avoid confusion with different unifiac devices, rename existing target
"unifiac" to "unifiac-lite", before "unifiac-pro" is introduced.

Signed-off-by: P.Wassi <p.wassi at gmx.at>
2016-05-12 03:29:36 +02:00
blogic
75629fb2a8 ar71xx: add TP-Link TL-WR810N support
This patch adds support for the TP-Link TL-WR810N.
https://wiki.openwrt.org/toh/tp-link/tl-wr810n

Signed-off-by: Jens Steinhauser <jens.steinhauser@gmail.com>

SVN-Revision: 49286
2016-05-10 10:43:12 +02:00
John Crispin
ee53a240ac ar71xx: Add support for the OMYlink OMY-G1
https://wiki.openwrt.org/toh/omylink/omy-g1

http://www.omylink.com/

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 49258
2016-04-26 11:44:36 +00:00
John Crispin
840bfa8549 ar71xx: Add TP-Link TL-WR740N v6 support to trunk
This patch adds support for the TP-Link TL-WR740N v6 into OpenWrt trunk. Hardware wise, it's very similar to the TL-WR841N v10. See the forum thread [1]. Credit goes to the user 'traveler' who did the legwork and tested builds.

Also thanks to Matthias Schiffer for clarifying the DEVICE_PROFILE settings.

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

[1]: https://forum.openwrt.org/viewtopic.php?pid=318704

SVN-Revision: 49245
2016-04-26 11:43:45 +00:00
John Crispin
5099a0d386 ar71xx: build TP-LINK Archer C7 images with US region code
Since December 2015, the Archer C7 comes with an US-specific firmware. This
firmware will only allow upgrades with images that contain the US region
code in the firmware header.

The "universal" firmware distributed in the rest of the world doesn't care
about the region code, so we can just unconditionally set the region to US
for now. When other region-specific firmwares appear, we'll need to create
a factory image for each of them.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 49217
2016-04-21 19:47:22 +00:00
John Crispin
b225de37bc ar71xx: fix giving extra arguments to Build/mktplinkfw
The build command will always get the whole argument string in $(1),
regardless of whitespace. We need to use word/wordlist to split the string
after the first word.

Whitespace and quotation will be given to the command verbatim (make will
ignore it), so to give multiple arguments, no quotation marks may be used.

Fixes: r47174 ("ar71xx/image: add options argument to mktplinkfw step")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 49216
2016-04-21 19:47:19 +00:00
John Crispin
5f1a82ec4f ar71xx: add TP-Link TL-WA901ND-v4 support
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 49158
2016-04-09 10:26:46 +00:00
John Crispin
d9799dea89 ar71xx: add support for Compex WPJ342
OpenWrt can be flashed with following uboot commands:

tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 49157
2016-04-09 10:26:41 +00:00
John Crispin
0211fa1253 ar71xx: create profile and build image for the OpenMesh OM5P-AC board
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49148
2016-04-09 10:26:11 +00:00
John Crispin
c8dd53e591 ar71xx: Add TL-WR841N/ND v11 support
This patch adds support for the TP-Link TL-WR841N/ND to trunk. It is
similar to the already supported v10 - see [1]. I have added support
based on that topic; in the meantime it has been confirmed working
(see the forum thread, and also [2]).

Signed-off by Stijn Segers <francesco.borromini@inventati.org>

[1]: https://forum.openwrt.org/viewtopic.php?id=61309
[2]: https://forum.openwrt.org/viewtopic.php?id=63657

SVN-Revision: 49099
2016-04-01 07:11:23 +00:00
Luka Perkov
8258f8edb6 ar71xx: cosmetic fix of alfa ap120c/ap96 ordering
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49086
2016-03-24 21:09:34 +00:00
Luka Perkov
ebaba15331 ar71xx: add support for ap120c
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49082
2016-03-23 22:31:38 +00:00
John Crispin
98a01048b8 ar71xx: migrate tplink cpe510 to new build steps
cpe510: Tested sysupgrade and initramfs.
Untested: webIf w/ factory.bin & recovery.bin

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49081
2016-03-23 12:52:50 +00:00
John Crispin
e0a3a84521 ar71xx/image: allow builds of loader without cmdline injecting
On most platforms the cmdline is supplied by the loader to the kernel.
When using an elf loader with cmdline the size is bloated by 512k.
For loader-elf platforms like the cpe510 better use loader-elf but patch
the cmdline into the kernel.

wdr1043: Tested loader still works using sysupgade image.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49080
2016-03-23 12:52:47 +00:00
John Crispin
5bac8f0fd4 ar71xx/image: introduce LOADER_TYPE to support elf loaders
The loader decompress a lzma compressed kernel. Some bootloaders
only support elf files like the tplink cpe510

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49079
2016-03-23 12:52:44 +00:00
John Crispin
3fd98db818 ar71xx: Add support for the OMYlink OMY-X1
This patch adds support for the OMYlink OMY-X1

https://wiki.openwrt.org/toh/omylink/omy-x1

http://www.omylink.com/

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 49026
2016-03-16 09:26:58 +00:00
John Crispin
346b1905fb ar71xx: add support for the Telldus TellStick ZNet Lite
Signed-off-by: Micke Prag <micke.prag@telldus.se>

SVN-Revision: 48977
2016-03-10 19:07:26 +00:00
Felix Fietkau
619a58d641 ar71xx, firmware-utils: split ubdev01 flash layout from XM
The ubdev01 profile defines its own MTDPARTS with smaller firmware
partition, so give it its own UBNT_BOARD in mkfwimage.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 48828
2016-02-29 20:11:30 +00:00
John Crispin
56714adb4b ar71xx: correct imagename for TPlink WA730RE
- insert missing "-" to separate model and version

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48769
2016-02-25 10:14:13 +00:00
John Crispin
2a58dbda98 ar71xx: correct imagename for TPlink WA701ND
- it seems there was never a 701N-model build

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48768
2016-02-25 10:14:11 +00:00
John Crispin
bf49188bb1 ar71xx: matchup of TPlink WR841N(D)-names
- remove the suffix (N, ND) to indicate that the image is for all
  WR841-models
- some of these models have a "N"-suffix, others have (ND)-suffix,
  but the boards are the same - only difference is the detachable
  antenna on "D"-models
- discussed this idea to remove the suffix in IRC with jow and Borromini

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48767
2016-02-25 10:14:08 +00:00
John Crispin
cede06cebc ar71xx: Support for Ubiquiti UniFi AP AC LITE
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>

SVN-Revision: 48711
2016-02-12 08:31:32 +00:00
John Crispin
d6cb792d21 ar71xx: Added support for TL-WA801NDv3
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48705
2016-02-12 08:30:28 +00:00
Felix Fietkau
411515b368 ar71xx/image: use SOURCE_DATE_EPOCH for mksquashfs-lzma
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 48589
2016-01-31 23:29:41 +00:00
Felix Fietkau
6dc60d54fc Revert "ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4"
This reverts commit r48276.
This can overwrite the caldata_backup partition, so the layout needs to
be changed in a different way.

Thanks to Arjen de Korte for spotting the issue.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48456
2016-01-22 19:50:09 +00:00
John Crispin
ed72c5f846 ar71xx: add support for Netgear WPN824N
Add support for Netgear WPN824N.
Hardware specs:
  * AR7240, 4 LAN ports, 1 WAN port
  * AR9285 WLAN
  * 32 MB RAM
  * 4 MB Flash
  * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color
    effect)
  * 3 Buttons (not supported)

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48356
2016-01-19 10:16:04 +00:00
Gabor Juhos
55b0e261a4 ar71xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.

The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.

Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.

Fix the code to reserve stack space for the registers to avoid this
error.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 48279
2016-01-17 15:29:03 +00:00
Felix Fietkau
b7aab03486 ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4
Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash.

Credit to @Tuochenlyu on GitHub.

Signed-off-by: Chris Marchesi <chrism@vancluevertech.com>

SVN-Revision: 48276
2016-01-17 11:16:56 +00:00
Felix Fietkau
ef215468f1 ar71xx: ensure that LOADADDR is passed to lzma-loader
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48101
2016-01-03 20:57:16 +00:00
Felix Fietkau
f49dadb0bd ar71xx: fix factory images for WNR2200 (#19807)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48085
2016-01-03 14:45:26 +00:00
John Crispin
9242d27b4a V2 ar71xx : Add Support for the Bitmain Antrouter R1
This patch adds support for the Bitmain Antrouter R1

http://wiki.openwrt.org/toh/bitmain/r1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 48058
2016-01-01 21:21:13 +00:00
John Crispin
772f9d4e32 ar71xx: Add support for AirTight Networks C-55
This patch is to add support for the AirTight Networks C-55 Access Point

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47973
2015-12-23 14:43:35 +00:00
Felix Fietkau
4c282ecfe8 ar71xx: Image generation for PowerCloud CR5000 Cloud Router
Kernel part of support for the PowerCloud Systems CR5000.  The
CR5000 is a dual-band 802.11n wireless router with 8MB flash,
64 MB RAM, (unused in stock firmware) USB 2.0 port, and five
port gigabit ethernet switch.  The CR5000 was sold as hardware for
the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47943
2015-12-19 11:27:52 +00:00
Felix Fietkau
09a97f42d9 ar71xx: Image generation for PowerCloud CR3000 Cloud Router
Image generation part of support for PowerCloud CR3000.  The CR3000 is
a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM,
a four port fast ethernet switch, and a fast ethernet wan port which
was sold by PowerCloud Systems as hardware for the Skydog
cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47942
2015-12-19 11:27:45 +00:00
Felix Fietkau
bee52ee579 ar71xx: PowerCloud CAP324 image generation
Image generation (and mtd partition) part of support for
PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by
PowerCloud Systems who's stock firmware (CloudCommand) provides
'cloud' based managment of large numbers of access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port.  It can be powered via
PoE or a power adaptor.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47941
2015-12-19 11:27:39 +00:00
John Crispin
1f71f2220d ar71xx: add support for TRENDnet TEW-823DRU
Add support for TRENDnet TEW-823DRU:
- cpu: QCA9558 @720MHz
- flash: 16MB
- ram: 256MB
- 4+1 RJ45 100/1000Mbps
- wifi:  QCA9558 (bgn) and QCA9880-BR4A (ac)
- 1x USB 2.0

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 47927
2015-12-17 09:30:05 +00:00
John Crispin
abc84551c0 ar71xx: add support for Cisco's MR18
This patch adds support for Cisco's MR18.
Detailed instructions for the flashing the device can
be found in the OpenWrt forum thread:
<https://forum.openwrt.org/viewtopic.php?id=59248>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47878
2015-12-12 06:42:29 +00:00
John Crispin
1d2a4ec287 ar71xx: build image for TL-WR710N v2.1
This patch just extends target/linux/ar71xx/image/Makefile to build
images also for version 2.1 of TL-WR710N
patch against the latest git

Signed off by: Norbert Wegener <nw@wegener-net.de>

SVN-Revision: 47849
2015-12-11 15:05:20 +00:00
John Crispin
eb8ff56684 ar71xx: Add support for Wallys DR344
This patch is for Wallys DR344 support under OpenWRT

Signed-off-by: Philippe Duchein <wireless-dev@duchein.net>

SVN-Revision: 47847
2015-12-11 15:04:47 +00:00
John Crispin
fcf74b1138 ar71xx: image for AP121/16M
Build image for the AP121 reference board with 16MB flash.

Signed-off-by: Norbert Wegener <nw@wegener-net.de>

SVN-Revision: 47846
2015-12-11 15:04:22 +00:00
John Crispin
1a092ce0e0 ar71xx: add GL-Domino Pi support V3
This is the patch for GL-Domino Pi V3. Updated against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47622
2015-11-24 18:30:50 +00:00
John Crispin
a04c3e73a3 ar71xx: add GL-AR300 support V3
This is the patch for GL-AR300 V3, tested against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47621
2015-11-24 18:30:19 +00:00
John Crispin
72093bd528 ar71xx: add GL-AR150 support V3
This is the 3rd version. Modified against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47620
2015-11-24 18:29:59 +00:00
John Crispin
d6550887a9 ar71xx: fix the SingleProfile kernel size limit for dLAN devices
it ends up as $(2) of CatFiles and must be a plain decimal value.

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 47555
2015-11-21 21:24:23 +00:00
John Crispin
99fd9a7041 ar71xx: add support for the devolo dLAN Hotspot
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 47554
2015-11-21 21:24:18 +00:00
Hauke Mehrtens
fa137d51f5 ar71xx: add Arduino Yun
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83

The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.

Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47451
2015-11-10 23:13:09 +00:00
Felix Fietkau
7f75961e38 ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.

This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47420
2015-11-08 20:39:18 +00:00
Felix Fietkau
846b8593fc ar71xx: add support for the TP-LINK TL-WR1043ND v3
The hardware of the v3 is identical to the v2.

Based-on-patch-by: Andreas Ziegler <github@andreas-ziegler.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47406
2015-11-07 12:51:43 +00:00