Commit graph

33541 commits

Author SHA1 Message Date
Luka Perkov
158b5b4231 imx6: imx: thermal: use CPU temperature grade info for thresholds
This is a backport of a2291badc355d58ead5c19ae0609468947416040 from thermal-soc
accepted upstream.

The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP. Instead
of assuming 85C for passive cooling threshold and 100C for critical base
these thresholds off the thermal gade max CPU temperature:
 - passive threshold: max - 10C
 - critical threshold: max - 5C

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 48011
2015-12-28 04:56:07 +00:00
Luka Perkov
f0070d495e imx6: Add pwm nodes
Upstream status: Accepted

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48010
2015-12-28 04:55:54 +00:00
Luka Perkov
f6dfeee3fe imx6: ventana: add ecspi3 host controller for GW52xx
Certain board revisions of the GW52xx support an SPI host controller with
a single chip-select going to an off board connector.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48009
2015-12-28 04:55:48 +00:00
Luka Perkov
dee4e713e9 imx6: Add 4.3 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48008
2015-12-28 04:55:45 +00:00
Luka Perkov
fb8c5702e0 imx6: drop lingering files
Since 3.18 kernel support was dropped, remove lingering files.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48007
2015-12-28 04:55:33 +00:00
Hauke Mehrtens
f80cee1ce5 6in4: Corrected tunnelbroker tunnel update URL
Changed the tunnel update URL into format tunnelbrokers
example has, that made it work again. Current method gives "Username/Password
Authentication Failed." when I tried the wget line manually and logread
eventually says also "6in4: update failed". With corrected URL it works fine:
"good 111.222.333.444" or "nochg 111.222.333.444" and logread concurs with
success, and tunnel actually updates.

Tested-by: Vaasa Hacklab <info@vaasa.hacklab.fi>
Signed-off-by: Sami Olmari <sami@olmari.fi>

SVN-Revision: 48006
2015-12-27 20:42:26 +00:00
Felix Fietkau
5359183b7e ar71xx: fix sysupgrade for wnr2200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48005
2015-12-23 23:42:18 +00:00
John Crispin
c75c8ab6a6 libnl: fix warning with poll.h include on musl
Warning is:
  #warning redirecting incorrect #include <sys/poll.h> to <poll.

Not a big issue.
But it can be annoying when building with -Werror set.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 48004
2015-12-23 19:26:26 +00:00
John Crispin
1a54162447 binutils: upgrade to version 2.25
Fixes build:
config/tc-i386.c: In function 'build_modrm_byte':
config/tc-i386.c:6143:31: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
         && !op.bitfield.reg64 != 1

Contains this fix:
   https://sourceware.org/ml/binutils/2014-09/msg00095.html

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 48003
2015-12-23 19:26:11 +00:00
John Crispin
8d5ac2d0f1 lantiq: fix Image Builder
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48002
2015-12-23 19:25:55 +00:00
John Crispin
6f14878491 fstools: update to latest git HEAD
adds stacked ram overlays.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48001
2015-12-23 19:25:46 +00:00
John Crispin
e0c047c6c5 ca-certificates: update to version 20151214
update to version 20151214

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 48000
2015-12-23 19:25:33 +00:00
John Crispin
71cd537a8a swconfig: switch kernel PORT_LINK support to SWITCH_TYPE_LINK
As explained earlier, using SWITCH_TYPE_LINK gives more flexibility,
it doesn't require e.g. string parsing to read some data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47999
2015-12-23 19:25:02 +00:00
John Crispin
8536afae6f swconfig: support receiving SWITCH_TYPE_LINK from kernel
When using cli, print link state the same way kernel used to do it.
This will allow kernel switching PORT_LINK from SWITCH_TYPE_STRING.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47998
2015-12-23 19:24:45 +00:00
John Crispin
67e10d757f swconfig: add SWITCH_TYPE_LINK and support sending link info to user space
So far we were sending link data as a string. It got some drawbacks:
1) Didn't allow writing clean user space apps reading link state. It was
   needed to do some screen scraping.
2) Forced whole PORT_LINK communication to be string based. Adding
   support for *setting* port link required passing string and parting
   it in the kernel space.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47997
2015-12-23 19:24:30 +00:00
John Crispin
c01ca020ea lantiq: fix PCI_DEVICE_ID_LANTIQ_PCIE
It's not necessary to define PCI_* if pci_ids.h is included a few
lines above.

The change to pci_ids.h doesn't look intentional to me, especially
since the former value is added to the top of ifxmips_fixup_pcie.c.

Both changes were introduced with the kernel 4.1 support patches and
were not present in the 3.18 patches.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47996
2015-12-23 18:25:22 +00:00
John Crispin
11115d8e2c lantiq: ltq-adsl-mei: fix typo
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47995
2015-12-23 18:25:03 +00:00
John Crispin
e33aa71045 lantiq: TDW89x0 - increase spi frequency
Use the same max spi frequency as set in u-boot.

According to the datasheets, the Q64-104HIP as well as the Winbond
25Q64FVSIG support spi frequencies up to 50 MHz. During my tests, the
Q64-104HIP couldn't be recognized/initialized if the frequency
was > 40MHz.

Both chips do support fast read as well.

While touching the dts file, I fixed the dtc compiler warnings.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47994
2015-12-23 18:24:56 +00:00
John Crispin
3af2cf661b lantiq: disable SW_PORTMAP usage in the ethernet driver
using the special tag in this way lead to port mirroring for certain types of traffic.
fallback to using th PMAC_EWAN register for the wan portmap.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47993
2015-12-23 18:24:43 +00:00
Rafał Miłecki
e9e3a0682c ledtrig-netdev: reset link status & stats after changing device_name
Previously switching to non-existing device (interface) could result in
leaving LED on.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47990
2015-12-23 17:11:49 +00:00
Rafał Miłecki
2b1129a7ba ledtrig-netdev: drop locking from timer callback function
We may just delete timer on every trigger update and then start it again
if needed. This will let us avoid both: races and locking in frequently
called timer callback.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47987
2015-12-23 15:45:43 +00:00
Rafał Miłecki
a56aaf73b9 ledtrig-netdev: switch rwlock to spinlock
Read/write lock was adding useless complexity, there wasn't any real
gain in case of this driver.
Also switch to _bh variants to avoid deadlocks.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47986
2015-12-23 15:45:36 +00:00
John Crispin
e8c6d01d74 ar71xx: Update preinit script for new ath10k firmware
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47985
2015-12-23 14:45:30 +00:00
John Crispin
5ba6a654e4 ath10k-firmware: Update QCA988X firmware to 10.2.4.97-1
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47984
2015-12-23 14:45:22 +00:00
John Crispin
698edbbc32 ar71xx: refresh patches
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47983
2015-12-23 14:45:05 +00:00
John Crispin
502f91b22e ar71xx: add support for QCA956x ethernet
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47982
2015-12-23 14:44:56 +00:00
John Crispin
67953f30f3 ar71xx: update QCA956x support
- separate qca956x and tp9343 (they use different IDs)
- rename qca9561->qca956x for consistency
- add missing bits (device reset, gpio output select)
- fix wmac setup

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47981
2015-12-23 14:44:44 +00:00
John Crispin
3f78186f76 base-files: allow timezone to be overriden by zonename (proper zoneinfo support)
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47980
2015-12-23 14:44:31 +00:00
John Crispin
7029ee5abe openvpn: fix configure options
- eurephia:
commit: Remove the --disable-eurephia configure option

- fix option name:
http proxy option is now called http-proxy (see configure.ac)

fixes:
configure: WARNING: unrecognized options: --disable-nls, --disable-eurephia, --enable-http

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 47979
2015-12-23 14:44:24 +00:00
John Crispin
2baf90a84e tools/e2fsprogs: remove outdated configure args
removed upstream in 1.40.5:
Don't build e2fsck statically by default anymore 7e8fe327b51051adcbb0d44169b1a933173ce1ff

fixes:
configure: WARNING: unrecognized options: --disable-shared, --enable-static, --enable-dynamic-e2fsck

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 47978
2015-12-23 14:44:18 +00:00
John Crispin
47589bfbe8 util-linux: remove outdated configure options
removed upstream in commit:
- convert mount/ to module, rename to mount-deprecated/
- build-sys: remove deprecated-mount/

fixes log warning:
compile.txt:configure: WARNING: unrecognized options: --enable-new-mount

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 47977
2015-12-23 14:44:12 +00:00
John Crispin
fde2ac3537 package/lldpd: Remove extraneous select
Only the conditional dependency ought to be required;
if build fails with JSON there is some other problem
at work.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47976
2015-12-23 14:44:05 +00:00
John Crispin
16317ceb4f firmware-utils: allow mkfwimage2 to use - in partition names
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47975
2015-12-23 14:43:47 +00:00
John Crispin
a621edbb0a dnsmasq: Add option --no-ping
By default dnsmasq sends an ICMP echo request before allocating
an IP address to a host; the uci option noping allows to disable
this check.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 47974
2015-12-23 14:43:41 +00:00
John Crispin
772f9d4e32 ar71xx: Add support for AirTight Networks C-55
This patch is to add support for the AirTight Networks C-55 Access Point

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47973
2015-12-23 14:43:35 +00:00
John Crispin
4ea610da74 rb532: switch to 4.1
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47972
2015-12-23 14:43:11 +00:00
John Crispin
29199a766e rb532: build squashfs image by default
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47971
2015-12-23 14:43:05 +00:00
John Crispin
4be7901962 rb532: increase kernel partition
4.1 got little bit larger than 4MB and I couldn't get lzma loader
working on this platform

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47970
2015-12-23 14:42:59 +00:00
John Crispin
5e10f67b67 lantiq: Configure LED polarity for TDW8970 and TDW8980.
This patch configures the correct ath9k WLAN LED polarity for the TDW8970,
and for the TDW8980 as well.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47969
2015-12-23 14:42:25 +00:00
Felix Fietkau
3fca139a2b kernel: make kmod-thermal dependency conditional to match upstream kernel module configuration dependency for hwmon-pwmfan
Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>

SVN-Revision: 47968
2015-12-23 11:43:18 +00:00
Felix Fietkau
10afb1bd8c kernel: add remaining kernel patch accidentally left out of r47963
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47966
2015-12-23 11:40:53 +00:00
Felix Fietkau
dbf2ec47a6 gcc: remove v4.6 relicts
Fixes: commit f17e56eff5b9 ("gcc: remove version 4.6, it is no longer needed")

CC: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>

SVN-Revision: 47965
2015-12-23 11:23:19 +00:00
Felix Fietkau
720afadc7a kernel: backport all current pppoe kernel fixes to 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47963
2015-12-23 11:15:02 +00:00
Rafał Miłecki
8996164e56 ledtrig-netdev: update base driver instead of patching it for every kernel
All supported kernels require patching ledtrig-netdev in the same way,
so it's safe to just move these changes to the base version of this
driver. We needed these patches for some old kernels 2.6.36 and 3.11.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47962
2015-12-23 10:17:09 +00:00
Felix Fietkau
2be144fa3c kernel: make kmod-thermal dependency conditional to match upstream kernel module configuration dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47961
2015-12-22 19:05:35 +00:00
Felix Fietkau
854c77bcea kernel: make kmod-gpiofan depend on kmod-thermal to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47960
2015-12-22 16:58:45 +00:00
Zoltan Herpai
0f18228a3a packages: bump uboot-sunxi to enable H3 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47959
2015-12-22 13:04:31 +00:00
Felix Fietkau
2a0e1b7f8d mac80211: merge a fix for a ps-poll handling issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47958
2015-12-20 21:28:30 +00:00
Zoltan Herpai
c0af633775 kernel/4.4: add missing config options
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47957
2015-12-20 18:19:45 +00:00
Felix Fietkau
814d70b2fd ar8216: rework/fix AR8337 MAC swap handling
In r45970 the MAC swap handling was made opt-in, however some boards
have been forgotten during the conversion. Since the reference design
uses this MAC swapping, and pretty much all known boards using this chip
seem to do so too, enabling the swapping is a more reasonable default
than leaving it disabled.

Change the code to still allow boards to opt-out of this.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47956
2015-12-20 14:25:45 +00:00