Commit graph

29172 commits

Author SHA1 Message Date
Steven Barth
3f700643fa ppp: remove ugly ipv6-workaround
This is not needed after all:

Omitting option ipv6 or setting it to 'auto' will
fire up a dhcpv6 subprotocol (this was added).

Setting ipv6 to 1 will only cause the IPv6 link to
be brought up and an accompanying dhcpv6 or static
interface with ifname @wan can be used to configure addresses.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42859
2014-10-09 07:35:28 +00:00
Steven Barth
195a618877 kernel: add missing symbols for 3.14
spotted by buildbot brcm2708:
http://buildbot.openwrt.org:8010/builders/brcm2708/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42858
2014-10-09 07:18:07 +00:00
Steven Barth
b2d099c11c dropbear: ensure the interface has an ip-address
Use network_get_ipaddrs_all to get all ip-addresses of an interface. If the
function fails, the interface does not exists or has not any suiteable ip
addresses assigned.

Use the returned ip-address(es) to construct the dropbear listen address.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 42857
2014-10-09 07:16:35 +00:00
Steven Barth
14e6559eee base-files: add network_get_ipaddrs_all()
Return all IPv4 and IPv6 addresses.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 42856
2014-10-09 07:16:29 +00:00
Steven Barth
8a4c2890c8 autoconf: bump version to 2.69
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 42855
2014-10-09 07:16:22 +00:00
Steven Barth
c62b07b2ce ppp: allow auto-detecting and creation of ipv6 subinterface
this makes ipv6 with ppp a bit more comfortable

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42854
2014-10-08 20:37:15 +00:00
Steven Barth
ea0a01d7e2 odhcp6c: fix typo in last commit
SVN-Revision: 42852
2014-10-08 15:27:17 +00:00
Steven Barth
c7a941cf02 odhcp6c: don't assign addresses or prefixes prematurely
SVN-Revision: 42850
2014-10-08 15:16:19 +00:00
Felix Fietkau
8609ca69e0 mac80211: add a few upstream ath9k / mac80211 fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42849
2014-10-08 15:09:53 +00:00
Steven Barth
c118e5edf4 network: Unbind DHCPv6 from underlying interfaces
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42848
2014-10-08 13:08:05 +00:00
Felix Fietkau
fa5237d936 cns3xxx: Adopt irq_domain support for cns3xxx gpio driver
Have gpio driver adopt irqdomain support so that there are
non-overlapping allocations of irq numbers mapped to gpio's.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42844
2014-10-08 10:28:10 +00:00
Steven Barth
5fa47c3c04 odhcp6c: ensure signal-safety of signal handlers
SVN-Revision: 42841
2014-10-08 09:58:40 +00:00
John Crispin
b0a1c7dc0d include/download.mk: Add download mirrors for tools from GNU Savannah (bug #15184)
I defined a new download method @SAVANNAH in include/download.mk and scripts/download.pl,
and converted quilt and qemu to use that method.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 42840
2014-10-08 08:01:39 +00:00
John Crispin
344a304524 lldp: make use of new USERID syntax
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42839
2014-10-08 08:01:33 +00:00
John Crispin
a3bf98495a base-files: extend USERID:=syntax
it is now possible to inlie the uid and gid in the syntax

USERID:=username=uid:group=gid:group2=gid2:...

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42838
2014-10-08 08:01:28 +00:00
John Crispin
90120bb771 wwan: add a generic 3g/4g proto
this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need
for a stick and setup uci automagically

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42837
2014-10-08 08:01:20 +00:00
John Crispin
1df98fcd5a comgt: split directip support into its own package
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42836
2014-10-08 08:00:55 +00:00
John Crispin
bb64826bdb uqmi: dont use proto_block_restart
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42835
2014-10-08 08:00:45 +00:00
John Crispin
e53734ddef uqmi: make the proto depend on the usb driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42834
2014-10-08 08:00:21 +00:00
John Crispin
87edc29ea1 umbim: dont use proto_block_restart
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42833
2014-10-08 08:00:17 +00:00
John Crispin
2fa06954a3 umbim: work out the ifname instead of relying on it being in uci
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42832
2014-10-08 08:00:07 +00:00
John Crispin
e28c5f86f3 procd: handle hotplug events for the usbmisc subsystem
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42831
2014-10-08 08:00:01 +00:00
Felix Fietkau
736419452b cns3xxx: fix shared PCI interrupt mapping
This patch originally failed to combine INTA/B/C/D onto a single ARM CPU
interrupt. Instead, it mapped INTA/B/C and excluded D. This patch
corrects the issue by mapping all four interrupts to the single ARM CPU
interrupt. The original intent of the patch still holds as the newer PCB
take advantage of isolated interrupts. This fix only applies to older
PCB's that do not route INTA/B/C/D to unique external ARM CPU
interrupts.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42830
2014-10-07 10:37:48 +00:00
Felix Fietkau
0563e0225e cns3xxx: fix register for enabling MMC/SD pins
also fixes a GPIO related regression from the upgrade to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42829
2014-10-07 10:37:09 +00:00
Rafał Miłecki
b9d3767ada kernel: move old "rootfs" splitter into separated file
This will simplify removing it in the future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42828
2014-10-07 07:35:17 +00:00
Rafał Miłecki
2818493e82 bcm53xx: add Netgear R6300 V2 LEDs and buttons
Thanks tusc (our forum user) for checking GPIOs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42827
2014-10-06 21:33:17 +00:00
John Crispin
550ded7b8a procd: r42814 added a bad git version
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42826
2014-10-06 20:27:31 +00:00
John Crispin
ec69988d09 at91: remove support for TQMa9263
This board is EOL, we should not bother anymore with it.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42825
2014-10-06 20:08:40 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
SVN-Revision: 42824
2014-10-06 20:08:30 +00:00
John Crispin
6a961da231 lantiq - vgv7519: enable pci bus
SVN-Revision: 42823
2014-10-06 20:08:18 +00:00
John Crispin
c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else
SVN-Revision: 42822
2014-10-06 20:08:11 +00:00
John Crispin
4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp
SVN-Revision: 42821
2014-10-06 20:08:04 +00:00
John Crispin
1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts
SVN-Revision: 42820
2014-10-06 20:07:56 +00:00
John Crispin
ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts
SVN-Revision: 42819
2014-10-06 20:07:45 +00:00
John Crispin
9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
SVN-Revision: 42818
2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
SVN-Revision: 42817
2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
SVN-Revision: 42816
2014-10-06 20:07:04 +00:00
John Crispin
7103d61271 lantiq: fix some alt function on pinctrl-xway
SVN-Revision: 42815
2014-10-06 20:06:51 +00:00
John Crispin
9f2a5ace84 procd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42814
2014-10-06 20:06:41 +00:00
John Crispin
c53de497f8 ubox: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42813
2014-10-06 20:06:26 +00:00
John Crispin
635c9d7a25 fstools: update to latest git
adds support for /dev/vd* virtual io

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42812
2014-10-06 20:06:15 +00:00
John Crispin
619de2faf2 octeon: add patches which are not upstreamed yet
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42811
2014-10-06 20:06:06 +00:00
John Crispin
7350373657 octeon: remove kmod-ath9k from default packages
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42810
2014-10-06 20:05:52 +00:00
John Crispin
90cbc9a04f octeon: prepare elf kernel image and md5sum for usb copying
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42809
2014-10-06 20:05:39 +00:00
John Crispin
3ff9c76e9e octeon: fix serial console for 3.14 kernel
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 42808
2014-10-06 20:05:29 +00:00
John Crispin
97c202968a ralink: various i2c fixes
the driver did not handle all states correctly causing a deadlock of the i2c hw block.

Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>

SVN-Revision: 42807
2014-10-06 20:05:13 +00:00
Rafał Miłecki
d30e92884e kernel: add some warnings to the old (built-in) rootfs splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42806
2014-10-06 15:07:54 +00:00
Rafał Miłecki
a58a4bb580 kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42805
2014-10-06 14:02:06 +00:00
Rafał Miłecki
b87ff2cae7 kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT
We want to remove that old (built-in) splitter at some point.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42804
2014-10-06 13:49:11 +00:00
Steven Barth
8691d75917 odhcp6c: add route-workaround for broken IPv6-ISPs
Some ISP seem to only do stateful DHCPv6 and not sending RAs.
This is technically broken because plain DHCPv6 doesn't carry routes.

We work around here by faking a default route to the DHCPv6 server
if we do not receive a useful RA from the ISP.

This workaround can be turned off with: option fakeroutes 0

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42803
2014-10-06 11:19:33 +00:00