Commit graph

26809 commits

Author SHA1 Message Date
Nicolas Thill
6c511ed529 toolchain: update build steps doc
SVN-Revision: 39631
2014-02-18 22:15:58 +00:00
Nicolas Thill
41d3230b0c mac80211: disable libertas-sd on uml target
SVN-Revision: 39630
2014-02-18 22:15:52 +00:00
Nicolas Thill
ece85d2d25 uboot-envtools: pass target cflags
SVN-Revision: 39629
2014-02-18 22:11:24 +00:00
Steven Barth
97faa098a2 odhcp6c: readd userclass and vendorclass
SVN-Revision: 39628
2014-02-18 18:30:47 +00:00
Gabor Juhos
2288dd072b kernel: refresh configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39627
2014-02-18 17:34:18 +00:00
Gabor Juhos
6b8eb55ddb ar71xx: fix unaligned access hacks for tcp timestamps
This missing bit of the hack saves hugely on instruction traps
on tcp connections to ar71xx based routers.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4905/
[juhosg: adjust subject, refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39626
2014-02-18 17:34:17 +00:00
Gabor Juhos
d6cb5215a9 ar71xx: WNR2200: fix mounting root fs problem
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>

Without this patch, UART output will show only 4 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000050000 : "u-boot"
  [    0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
  [    0.770000] 0x000000070000-0x0000007f0000 : "firmware"
  [    0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"

With this patch, UART out will show 7 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000040000 : "u-boot"
  [    0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
  [    0.770000] 0x000000050000-0x0000007f0000 : "firmware"
  [    0.780000] 2 netgear-fw partitions found on MTD device firmware
  [    0.780000] 0x000000050000-0x00000014b440 : "kernel"
  [    0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
  [    0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.820000] mtd: device 4 (rootfs) set to be root filesystem
  [    0.830000] 1 squashfs-split partitions found on MTD device rootfs
  [    0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
  [    0.840000] 0x0000007f0000-0x000000800000 : "art"

This patch is tested against r39502 of trunk.

Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39625
2014-02-18 17:34:16 +00:00
John Crispin
0da7d381f0 odhcp6c: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39624
2014-02-18 13:34:16 +00:00
John Crispin
159ee2bbd3 relayd: add uci validation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39623
2014-02-18 13:34:12 +00:00
John Crispin
7d4103ddd4 mac80211: add validation rules
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39622
2014-02-18 13:34:08 +00:00
John Crispin
8fb44e0d1e netifd: add validation support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39621
2014-02-18 13:34:04 +00:00
John Crispin
26e850dafa hostapd: add validation rules to wireless handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39620
2014-02-18 13:33:59 +00:00
John Crispin
ee5cb76c66 ppp: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39619
2014-02-18 13:33:56 +00:00
John Crispin
ed72f7102c comgt: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39618
2014-02-18 13:33:52 +00:00
John Crispin
15ebcfc04e firewall3: update init.d script to make use of procd
add validation data

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39617
2014-02-18 13:33:47 +00:00
John Crispin
f9f8948c6e ubox: logd did not register its config.reload trigger properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39616
2014-02-18 13:33:43 +00:00
John Crispin
7917a87d12 base-files: split /etc/init.d/boot into 2 files
this allows us to bind a procd trigger to system.@system[-1]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39615
2014-02-18 13:33:40 +00:00
John Crispin
204e859542 netifd: update to latest git head
this adds support for proto and wireless handler adding uci validation rules

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39614
2014-02-18 13:33:36 +00:00
John Crispin
97ee2bc616 procd: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39613
2014-02-18 13:33:32 +00:00
John Crispin
b71eb4b5df procd: the helper script did not export all functions properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39612
2014-02-18 13:33:29 +00:00
John Crispin
b56bef28d7 ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39611
2014-02-18 13:33:25 +00:00
John Crispin
55383946dc ralink: add gpio_uartf mux group
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39610
2014-02-18 13:33:20 +00:00
John Crispin
363512b8c6 ralink: fix the gpio mode mapping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39609
2014-02-18 13:33:16 +00:00
John Crispin
9bf6569f68 authsae: update to latest version
Signed-off-by: Stefan May <smay@4finger.net>

SVN-Revision: 39608
2014-02-18 13:33:13 +00:00
John Crispin
408306633a openssl: fix up PKG_DEPENDS. there are 2 missing CONFIG_ prefixe
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39607
2014-02-18 13:33:08 +00:00
Felix Fietkau
27d9aa182c uci: update to latest version, adds preparation for validation support and blobmsg int64 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39606
2014-02-18 12:27:11 +00:00
Steven Barth
f906a7f565 odhcp6c: send reconfigure-accept again to be compliant
SVN-Revision: 39605
2014-02-17 20:31:21 +00:00
Steven Barth
2f2a73f862 odhcpd: Fix RA interval + add support for prefixes > 64 and < 97
SVN-Revision: 39604
2014-02-17 20:30:29 +00:00
Zoltan Herpai
f57f19ed81 3.13: revert r39601 as the symbol is already there
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39602
2014-02-17 11:49:34 +00:00
Zoltan Herpai
a3dfcac7ba 3.13: add missing NF_TABLES symbol - until someone packages it
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39601
2014-02-17 10:57:11 +00:00
Zoltan Herpai
e82a230930 3.13: add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39600
2014-02-17 10:20:53 +00:00
Luka Perkov
0f2ff3ba97 cmake: upgrade to 2.8.12.2
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39598
2014-02-16 21:51:10 +00:00
Steven Barth
41acaaf893 netifd: work around dangling prefix kernel-routes (fixes #14963)
SVN-Revision: 39597
2014-02-16 11:20:22 +00:00
Luka Perkov
30c39f99a7 kirkwood: dockstar: remove sata from packages
The dockstar doesn't have any sata ports.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39596
2014-02-16 00:14:29 +00:00
Luka Perkov
9ba7cbafe4 kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39595
2014-02-16 00:14:27 +00:00
Luka Perkov
ddcd83e3df uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39594
2014-02-16 00:14:26 +00:00
Luka Perkov
58fa3f8fdf kirkwood: update support for dockstar
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39593
2014-02-15 23:53:10 +00:00
Luka Perkov
0b0357b50e kirkwood: update support for ib62x0
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39592
2014-02-15 23:53:09 +00:00
Luka Perkov
0c25f159fd kirkwood: update support for iconnect
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39591
2014-02-15 23:53:08 +00:00
Luka Perkov
777e7c3ff5 uboot-kirkwood: update to 2013.10
Tested on:

 * Cloud Engines Pogoplug E02
 * RaidSonic ICY BOX IB-NAS62x0
 * Iomega Iconnect

Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.

Sample ib62x0 commands for running second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000

Sample ib62x0 commands for flashing second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000

While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39590
2014-02-15 23:53:07 +00:00
Luka Perkov
cde033f918 kernel: rtl8306: update reset function
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39589
2014-02-15 22:54:35 +00:00
Luka Perkov
6e0fd6d518 lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39588
2014-02-15 22:54:34 +00:00
Luka Perkov
eddc327c7c lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
2014-02-15 22:54:32 +00:00
Steven Barth
af8f06beca netifd: fix source-routing breaking 6in4 + others
6in4 historically allowed an ip6addr without a mask however the newly
introduced source-routing segfaulted in this scenario (#14958 + #14858).

Fixes include: "Fix ubus route src mask printing" and
"Disable netlink auto ack" (thanks to Hans Dedecker)

SVN-Revision: 39586
2014-02-14 21:21:44 +00:00
Imre Kaloz
183e6a2bbc use the default package set
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39584
2014-02-14 10:09:07 +00:00
Jo-Philipp Wich
b1d7ebae09 ar71xx: fix mtdpartsize macro in image Makefile (#14961)
The mtdpartsize macro triggers shell errors on various Linux distributions
when the partname argument $(1) does not appear within the partmap $(2).

Change the sed pattern to only emit anything if a successful substitution
occured and only evaluate the arithmetic expression if something was printed
by the sed program.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 39583
2014-02-13 21:19:00 +00:00
Imre Kaloz
af63cdf87a upgrade 3.13 targets to 3.13.2, refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org

SVN-Revision: 39582
2014-02-13 13:27:14 +00:00
Imre Kaloz
83d9cec491 upgrade 3.12 to 3.12.10
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39581
2014-02-13 12:57:36 +00:00
Imre Kaloz
4c1dabb81e change image generation logic
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39580
2014-02-13 10:43:32 +00:00
Imre Kaloz
157f56c461 handle "neon" fpu type
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39579
2014-02-12 15:43:14 +00:00