Commit graph

55 commits

Author SHA1 Message Date
Mathias Kresin
e4e984f2a0 treewide: use only board_name function to get name
Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
ac3e05c5d7 treewide: populate boardname and model earlier
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Kristian Evensen
1898f7339f Add missing APU1 reference to x86 board.d
x86 board.d only contains a case for the APU2, not the APU1. This
causes, for example, network configuration not to be created correctly.
Even though the APU1 seems to reaching EOL, there a still a lot of them
out there.

The APU1 and APU2 is configured in the same way and this patch should
also be considered for stable, as the error also exists there.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-06-06 23:01:53 +02:00
Matthias Schiffer
dac07ca05b
x86: sysupgrade: explicitly rescan disk after writing partition table
This should ensure that the kernel partition can be mounted in
platform_copy_config when its size has changed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
a77633d36d
x86: sysupgrade: refactor platform_do_upgrade
By returning early when no upgrade device can be found and handling the
SAVE_PARTITIONS=0 case differently, we can get rid of two levels of if.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
19b84cfff2
x86: sysupgrade: move partition table change check to platform_check_image
The staged sysupgrade will prevent us from using ask_bool in
platform_do_upgrade; therefore, the check is moved to platform_check_image.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Daniel Golle
63571cb56c x86: keep /boot mounted for kexec
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-05 07:12:47 +02:00
Chris Blake
9a6c932556 x86: Add board configs for the PC Engines APU2
This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-02-15 07:52:28 +01:00
David Woodhouse
add465f1be x86: Enable DIAG LED on Geos
Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-15 07:52:28 +01:00
Chris Blake
27a635f0b4 x86: Move Traverse Geos configs into x86 base-files
This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-02-15 07:52:28 +01:00
Felix Fietkau
b02c381b4b x86: fix sysupgrades on disks with 4k block size
Even when the disk uses 4k blocks, the partition table still uses units
of 512 byte sectors. Always use ibs=512 for the offsets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 08:13:15 +01:00
Felix Fietkau
1d6879eedd x86/generic: add xen DomU support
Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Yousong Zhou
6f61d8511e base-files: export x86 platform upgrade functions to common.sh
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Yousong Zhou
fa37bdc05a x86: move sysupgrade.tgz only if it exists
To squash error messages at boot time

    mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:13 +01:00
Jo-Philipp Wich
699f7ecd15 x86: use sysfs DMI information to populate sysinfo
Use the DMI data available in sysfs to extract manufacturer and model info
and write it to /tmp/sysinfo/.

The data will be picked up by board_detect and can be used by e.g. LuCI to
display a more appropriate model description.

On an APU board the files will contain the following values:

    # cat /tmp/sysinfo/model
    PC Engines APU

    # cat /tmp/sysinfo/board_name
    pc-engines-apu

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:11 +02:00
Jo-Philipp Wich
1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
Jo-Philipp Wich
924fb794bd x86: search PARTUUID in any block device
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-30 03:19:23 +02:00
Jo-Philipp Wich
9f422eba7c x86: make sysupgrade work without partx
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-30 03:10:51 +02:00
Hauke Mehrtens
8a7b28071f x86: fix platform_export_bootpart() for Xen virtual disks
Virtual disk devices in a Xen virtual machine (DomU) can be /dev/xvda,
/dev/xvdb and so on with partitions like /dev/xdva1. Devices named like
this where not considered before. This resulted in a non working
sysupgrade, because the boot partition could not be found.

Signed-off-by: Alexander Dahl <alex@netz39.de>
Suggested-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49190
2016-04-17 13:24:30 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Felix Fietkau
ad3220aa8b x86: remove redundant default network config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48530
2016-01-28 18:19:59 +00:00
Jo-Philipp Wich
02e2548b84 x86: use PARTUUID instead explicitly specifying the device by default
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.

It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.

Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44966
2015-03-24 10:08:12 +00:00
Felix Fietkau
d2b08fb4ab x86: remove old soekris config hacks, install a more appropriate default /etc/config/network with lan+wan
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42888
2014-10-12 20:25:30 +00:00
Steven Barth
c118e5edf4 network: Unbind DHCPv6 from underlying interfaces
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42848
2014-10-08 13:08:05 +00:00
John Crispin
f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Felix Fietkau
a14437024c x86: fix sysupgrade
Function move_config should be called after or during preinit_mount_root
hook in do_mount_root function. At this state sysupgrade.tgz is not in its
place during that time when do_mount_root is called. Function move_config
is called later so the sysupgrade.tgz stays in root directory to the second
restart when it is unpacked properly.

This patch adds move_config function to preinit_mount_root hook instead
of preinit_main and changes the filename of script to be called before
80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root
within preinit_mount_root hook.

This patch solves ticket #15042 and #14088.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 39996
2014-03-21 15:55:07 +00:00
John Crispin
f0b5e7d419 x86: change /dev/console to tty to fix job control
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).

This patch switches /dev/console to tty devices for ash on x86 generic target.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 37693
2013-08-04 17:05:33 +00:00
Felix Fietkau
b95bdc8ab5 kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37282
2013-07-14 12:56:58 +00:00
John Crispin
831c7ea04f preinit: move cmdline failsafe= handling ot the generic code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36430
2013-04-25 19:02:37 +00:00
Steven Barth
4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
Jo-Philipp Wich
f600ec5b3b x86: allow both old and new grub signatures in sysupgrade
SVN-Revision: 33898
2012-10-23 16:34:00 +00:00
Felix Fietkau
95e642632a x86: correct image magic for grub2 images
Sysupgrade broke on x86 when grub2 superceded grub.  This patch
corrects tha magic_word to be expected in grub2 combined images.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 33890
2012-10-22 16:06:29 +00:00
Felix Fietkau
a1bcd25082 x86: add grub2 iso support
SVN-Revision: 33639
2012-10-07 23:01:52 +00:00
Vasilis Tsiligiannis
1978c07539 Fix sysupgrade for squashfs, jffs2 and ext4 images
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

SVN-Revision: 32465
2012-06-19 22:36:53 +00:00
Felix Fietkau
5571acdbd0 x86/soekris: Add defconfig for soekris net4801 and net4826
Add default config file for net4801 and 4826 and initial script
to copy config file like it is done for other platforms.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25103
2011-01-26 11:33:46 +00:00
Felix Fietkau
3d9d5cee8a x86/soekris: Add script to detect soekris model
Add script to detect soekris board of net4801 and net4826.

Patch from: kentarou matsuyama <matsuyama@thinktube.com>

SVN-Revision: 25102
2011-01-26 11:33:42 +00:00
Nicolas Thill
1fc7da0306 sysupgrade: fix typo in platform_do_upgrade() on x86 (closes: #7068), thanks to acinonyx
SVN-Revision: 20703
2010-04-04 15:47:26 +00:00
Florian Fainelli
e1a4f69cb5 sysupgrade: Get target device from kernel cmdline, patch from acinonyx
SVN-Revision: 20538
2010-03-28 11:55:07 +00:00
Jo-Philipp Wich
817d27bcdc sysupgrade: Dump image to sda device instead of hda (patch by Acinonyx)
SVN-Revision: 20514
2010-03-27 15:28:17 +00:00
Jo-Philipp Wich
c63fd559fc base-files: remove redundant "Press " when writing enter failsafe message
SVN-Revision: 20393
2010-03-23 22:57:16 +00:00
Jo-Philipp Wich
9feb2ed7c5 preinit: use grep -q where applicable
SVN-Revision: 19479
2010-02-01 00:33:34 +00:00
Felix Fietkau
b88fc11e2a preinit: Remove Ctrl-C prompt...impossible on /dev/console (patch by cshore)
SVN-Revision: 19367
2010-01-28 19:27:49 +00:00
Felix Fietkau
56bc02a305 add preinit modularization work by Daniel Dickinson (cshore)
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
Jo-Philipp Wich
5231811851 sysupgrade-ext2 sync before writing image, not after Sysupgrade for ext2 currently flushes the filesystem buffers after an image is written to the disk. This should happen before the image is written.
SVN-Revision: 16867
2009-07-16 13:39:36 +00:00
Felix Fietkau
065306a9a8 fix small logic error in x86 sysupgrade script, which prevented upgrades from jffs2 to squashfs (#3321)
SVN-Revision: 12672
2008-09-23 17:46:23 +00:00
Felix Fietkau
f47a4a58c5 fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86)
SVN-Revision: 12657
2008-09-23 11:05:54 +00:00
Travis Kemen
7346ef83e1 fix sysupgrade endian issues
SVN-Revision: 11900
2008-07-22 01:11:30 +00:00