Commit graph

35038 commits

Author SHA1 Message Date
Sven Eckelmann
00943e0931 package/uboot-envtools: add OpenMesh OM2P-HSv3 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
Sven Eckelmann
f3ac61850d package/om-watchdog: add OpenMesh OM2P-HSv3 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
Sven Eckelmann
222dfb3d6a ar71xx: enable sysupgrade for the OpenMesh OM2P-HSv3
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
Sven Eckelmann
e10d12411c ar71xx: add user-space support for the OpenMesh OM2P-HSv3
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
8010e8a370 ar71xx: add kernel support for the OpenMesh OM2P-HSv3
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
823cea2d5d ar71xx: Allow OpenMesh CE images with more than 3 files
The CE image format used by OpenMesh can contain extra blocks which
are not used for flashing. Only the first three embedded images
(fwupgrade.cfg, kernel, rootfs) are required in this order to successfully
flash an image via sysupgrade. All extra embedded images should be ignored
for the available devices.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
d1b4a8cfcf ar71xx: Move OpenMesh image target validation into subfunction
The platform_check_image_openmesh function used break statements to signal
that the board name matched the image target. This worked because the
sysupgrade binary checked the image inside a loop. The break statement
stopped the loop and skipped any additional check.

Instead the check should be done without such sideeffects by simply
combining the board names and image targets. Only a mismatch should cause a
negative result for the caller and skipping of the additional checks.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
6150c15ad1 ar71xx: Generate sysupgrade images for OpenMesh devices
Some OpenWrt based firmwares like Gluon expect that a sysupgrade image
exists when a device firmware can be updated via sysupgrade. This image
wasn't created until now because OpenMesh devices use the same image for
factory and sysupgrade flash. Copying the image from *factory.bin to
*sysupgrade.bin is therefore enough to make the sysupgrade functionality
visible.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:22 +02:00
Sven Eckelmann
9b6b75d09d ar71xx: Add support for initramfs images for OpenMesh devices
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:22 +02:00
Felix Fietkau
f85e5e6778 ar71xx: move nand device image definitions to a separate file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:22 +02:00
Felix Fietkau
dcc2ea3cf5 ar71xx: move generic device image definitions to a separate file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:22 +02:00
Felix Fietkau
054df4fda4 ar71xx: split ubnt image building code into a separate file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:21 +02:00
Felix Fietkau
736fc38d33 ar71xx: split legacy image building code into a separate file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:21 +02:00
Felix Fietkau
64b8bb3b69 ar71xx: split tp-link image building code into a separate file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:21 +02:00
Russell Senior
0fd183c155 x86_64: enable mmc to support booting off sd
Improved support for PCEngines APU

Signed-off-by: Russell Senior <russell@personaltelco.net>
2016-05-23 12:17:55 +02:00
Russell Senior
f89a20a89a ath25: update kernel from 3.18 to 4.4
Summary of changes:
	* moved config-3.18 to config-4.4 and patches-3.18 to patches-4.4
	* removed most of the first two patches, that seem to be upstream already
	* changed deprecated/removed IRQF_DISABLED to zero following examples in upstream kernel patches
	* added config line to disable device-tree to satisfy kernel configuration
	* add new image generation code

Build tested and run tested on an Accton MR3201A.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:56:38 +02:00
John Crispin
c7efbd7dbb ramips: Add specific compatible properties for esw
Currently, for RT5350 and MT7628, esw is marked as compatible with
"ralink,rt3050-esw". While this is true, the switches within RT5350
and MT7628 actually support more functionality than the RT3050 switch.

One such example is per-VLAN untagging, which is an important feature.

RT3352 is another example of this, but it already has an additional
compatible property, which allows to differentiate it from RT3050.

This commit adds such more specific properties for RT5350 and MT7628
as well.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-23 11:28:59 +02:00
John Crispin
f5f173e2b7 mediatek: update patches
* fixes NAND
* adds latest ethernet patches

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:20:20 +02:00
John Crispin
a39ac242cc base-files: fix some failsafe issues
* if the shell was closed booting continued

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
John Crispin
5dc80cbcff fstools: update to latest git version
* adds support for ACL mount flags
* adds vfat fsck support

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
John Crispin
12a24b6564 procd: update to latest head
fixes /dev/console handling during early boot

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
Mathias Kresin
abfdddfb3c lantiq: VG3503J - use the 11G firmware
Use the 11G firmware for the phys as the oem firmware does.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:25 +02:00
Mathias Kresin
9d0608eef3 lantiq: VG3503J - merge profiles
The only difference between the VG3503J profiles is the version of the
gphy firmware that gets loaded. This can be handled perfect fine in one
device tree source file.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
e81acacaa3 uboot-lantiq: ARV752DPW - use correct switch driver
There is no RTL8206 switch driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
a22feb4c78 uboot-lantiq: VGV7510KW22 - use ddr ram params from brnboot
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
382282eca9 uboot-lantiq: VGV7510KW22 - use leds to indicate boot status
Switch on the red power led if kernel image can't be loaded. Otherwise
switch the green led on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
9e8edcff99 uboot-lantiq: VGV7510KW22 - cleanup board config
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.

The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.

Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
b3795d0c93 uboot-lantiq: reorder and rework patches
use:
  - 00nn for u-boot patches
  - 01nn for new boards

While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
74b1687be3 uboot-lantiq: drop unused board patches
None of the boards is supported by lede. No need to keep the patches in
the lede tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
21bdd79b33 lantiq: disable phy led complex (test) functions by default
They can be added using the phy led device tree bindings if required.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:23 +02:00
John Crispin
9e41c3f54e imx6: move profile definitions to the image/Makefile
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:23 +02:00
Cezary Jackiewicz
2965430999 ramips: cleanup for Hame MPR-A2
- disable all ethernet ports except port 0 on MPR-A2

Port 0 is the only ethernet port on this router, so disable all other PHYs in order to save power.

- don't use a VLAN for the single ethernet port of the MPR-A2

Like A5-V11, this router only has one ethernet port.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-05-23 11:03:23 +02:00
John Crispin
31293752c8 mdns: update to latest git HEAD
* fixes loopback handling

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 10:26:32 +02:00
Felix Fietkau
e00770f093 image.mk: fix profile selection in the image builder
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 19:51:00 +02:00
Felix Fietkau
df98acc6a1 mvebu: backport upstream ethernet driver improvements and enable buffer manager support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 16:04:37 +02:00
Felix Fietkau
e90245237c oxnas: use global UBIFS_OPTS, all profiles use the same settings
Fixes build when selecting a device profile

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 15:58:41 +02:00
Felix Fietkau
2c9c998b4a mwlwifi: remove the a-mpdu failure messages entirely instead of hiding them in the debug log
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 15:51:21 +02:00
Felix Fietkau
848cacb21d mvebu: fix device I/O coherency issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 12:34:06 +02:00
Felix Fietkau
638a5682e1 kernel: remove bogus CONFIG_LOG_BUF_SHIFT overrides
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:35:41 +02:00
Felix Fietkau
a080b10331 mvebu: correct patch name of the crypto sram fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:32:30 +02:00
Felix Fietkau
629636dd25 mvebu: fix bus ranges for the crypto processor sram
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:06:46 +02:00
Felix Fietkau
7ae6b912ae libpcap: set a static default for PCAP_HAS_USB
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 20:02:10 +02:00
Felix Fietkau
22cc151e93 mvebu: tune kernel config for performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:07 +02:00
Felix Fietkau
f849c2c832 mvebu: enable core drivers in the kernel config instead of packaging them
Simplify profile package selection

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:06 +02:00
Felix Fietkau
a5a3b59bf5 mvebu: add some more flash driver fixes
Disable marvell,nand-keep-config property on WRT1900AC to allow the
flash driver to properly probe the chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
008579f2ff mvebu: rename recently added flash driver fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
4926e4b1ae mwlwifi: fix excessive logspam if starting a BA session fails
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
29ad4d2a0c mwlwifi: fix excessive use of busy-waiting that was tripping up the flash driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
ab5e07f731 mwlwifi: update to 10.3.0.17-20160520-1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
f0dd81043c mvebu: prevent crash in the flash driver in case of a spurious interrupt
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:38 +02:00