Commit graph

16 commits

Author SHA1 Message Date
Álvaro Fernández Rojas
2a57a54d49 ramips: add backported MT7628 pinmux fixes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-29 11:26:41 +02:00
John Crispin
bf6634339a ramips: fix timing issues when using MT7621 spi
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 20:22:22 +02:00
Felix Fietkau
82dcbec727 ramips: remove fake vlan rx offload from ethernet driver
The network stack does not need it to do GRO

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:01:21 +02:00
Álvaro Fernández Rojas
3bc90f9626 ramips: use backported upstream patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-19 17:48:41 +02:00
Álvaro Fernández Rojas
e32b2f92b1 kernel: update kernel 4.4 to version 4.4.10
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-11 21:34:27 +02:00
Álvaro Fernández Rojas
b062266ad6 kernel: update kernel 4.4 to version 4.4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-10 10:43:17 +02:00
D. Andrei Măceș
823c58a1cf ramips: mt7620: [UPSTREAM] fix USB frequency scaling
The logic for the SoC check got inverted. We need to check if it's
not a MT76x8.

Signed-off-by: D. Andrei Măceș <dmaces@nd.edu>
2016-05-10 10:43:13 +02:00
blogic
12758e32d3 ramips: Get rt3050 ethernet ports to be disabled from the device tree.
This patch allows configuring ports to be disabled in the device tree; this
saves power, since disabling ports here actually disables power to ethernet
PHYs.

Line 444 enables all ethernet ports, so line 487 is getting zero ports to be
disabled, except for port 5 in SoCs where this is not implemented as it will
be sticky disabled in register POC0. Because of this, the code will still read
the switch configuration and OR it to the device tree setting.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 49290
2016-05-10 10:43:12 +02:00
blogic
e626d4f702 ramips: Fix comment in rt3050 ethernet switch driver.
Line 444 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).

So, this patch fixes the comment in line 443.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 49289
2016-05-10 10:43:12 +02:00
blogic
e716fce5da ramips: Fix documentation for the rt3050 switch driver.
The prefix used in the driver is now "mediatek" instead of "ralink".

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 49288
2016-05-10 10:43:12 +02:00
blogic
decd89c57f ramips: Fix multicast ICMPv6 for the rt3050 ethernet switch.
The FCT2 esw register should be set to 0x2500C to have "unknown IPv6
multicast" packets broadcasted to every port, instead of dropped.
The previous value only let those packets go through ports 1 and 3.

"Unknown IPv6 multicast" packets include packets needed by ICMPv6 echo
requests addressed to well-known addresses, such as ff02::1 (MAC address
is 33:33:00:00:00:01 in this case).

Please note that by default ICMPv6 echo requests to ff02::1 are not replied
to by the router because of ip6tables considering those packets to be invalid.
But this is another bug/patch. ;)

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 49287
2016-05-10 10:43:12 +02:00
Hauke Mehrtens
657a2457a6 ramips: fix build of target
Makes the patches apply again by fixing the white space broken patch.
This problem was introduced in r49212.

Closes #22248 and #22259

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49221
2016-04-24 22:17:38 +00:00
John Crispin
a6c7c0029e ramips: awake rt305x USB controller
Because of Ralink uboot set USB controller into sleep mode [1]
we check it and awake controller before any registers access.
Fix ticket #21396 [2]

[1] http://marc.info/?l=linux-usb&m=137398626102108&w=2
[2] https://dev.openwrt.org/ticket/21396

Signed-Off-By: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 49212
2016-04-21 19:47:02 +00:00
Hauke Mehrtens
f0b3964f1b kernel: update kernel 4.4 to version 4.4.7
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49176
2016-04-16 21:05:48 +00:00
John Crispin
0ffa58009a ramips: Fixes for LinkIt 7688
Misc fixes for LinkIt 7688 board:

- Copy the right wireless firmware for the mt7688
- Add back '0065-mt7688-fixes.patch', left out after the move to Linux 4.4.
- Remove SPI_DEV from linux config which otherwise causes a massive warning
- Add wmac to LINKIT7688.dts so wireless works

Signed-off-by: Adam Kent <adam@semicircular.net>

SVN-Revision: 49130
2016-04-09 10:24:58 +00:00
Felix Fietkau
d041e8b44b ramips: add linux 4.4 support, update mt7621 subtarget to 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48951
2016-03-07 16:33:34 +00:00