Commit graph

1258 commits

Author SHA1 Message Date
Felix Fietkau
5be9e97a82 ar71xx: WNR612v2: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR612v2. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses. This is the same fix as for WNR2000v3.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48779
2016-02-25 13:31:38 +00:00
Felix Fietkau
3964ac919a ar71xx: WNR2000v3: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR2000v3. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48777
2016-02-25 13:31:32 +00:00
Felix Fietkau
29bbc6e6be ar71xx: reset ethernet tx ring on fast reset to prevent packet loss / irq issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48753
2016-02-22 15:11:23 +00:00
John Crispin
cede06cebc ar71xx: Support for Ubiquiti UniFi AP AC LITE
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>

SVN-Revision: 48711
2016-02-12 08:31:32 +00:00
John Crispin
13a85914ae ar71xx: Make code formatting consistent on ath79/machtypes.h
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48706
2016-02-12 08:30:38 +00:00
John Crispin
d6cb792d21 ar71xx: Added support for TL-WA801NDv3
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48705
2016-02-12 08:30:28 +00:00
Felix Fietkau
376e3ade79 ag71xx: fix build error with debugfs code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48695
2016-02-11 22:48:36 +00:00
Felix Fietkau
37dd95b772 ag71xx: increase rx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48694
2016-02-11 15:02:07 +00:00
Felix Fietkau
11ca71cfdb ag71xx: store ring size order instead of ring size to avoid div/mod
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48693
2016-02-11 15:02:00 +00:00
Felix Fietkau
033fbb7778 ag71xx: increase tx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48692
2016-02-11 15:01:54 +00:00
Felix Fietkau
b7a2c533da ag71xx: optimize icache footprint of the receive poll function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48691
2016-02-11 15:01:48 +00:00
Felix Fietkau
b1431170ee ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefully fix regression reported in #21520
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48652
2016-02-07 21:00:11 +00:00
Felix Fietkau
a63fd6faf7 ar71xx: fix MDIO bus probe on QCA956x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48651
2016-02-07 21:00:01 +00:00
Felix Fietkau
a5dd378a0e ar71xx: fold patch 622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch into files/
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48650
2016-02-07 20:59:51 +00:00
Felix Fietkau
2067f7f1de ar71xx: use page fragment API in the ethernet driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48578
2016-01-31 12:29:34 +00:00
Felix Fietkau
2530640f07 ar71xx: add support for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
Felix Fietkau
e5b5cce442 ar71xx: fix a few include errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48562
2016-01-30 13:19:37 +00:00
John Crispin
9d4e076966 ar71xx: fix AR8337 switch initialization on dLAN pro 1200+ WiFi ac
unswap ports 0/6 (broken by 17b8dcd63100a6b9e35199882f38bdc2be640777)

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 48357
2016-01-19 10:16:11 +00:00
John Crispin
ed72c5f846 ar71xx: add support for Netgear WPN824N
Add support for Netgear WPN824N.
Hardware specs:
  * AR7240, 4 LAN ports, 1 WAN port
  * AR9285 WLAN
  * 32 MB RAM
  * 4 MB Flash
  * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color
    effect)
  * 3 Buttons (not supported)

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48356
2016-01-19 10:16:04 +00:00
Felix Fietkau
5c5c60fec4 ar71xx: fix ethernet MAC reset on DMA hang
Fully reset the chip like on a full up/down, but without the PHY
statemachine restart.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48228
2016-01-13 16:22:16 +00:00
Felix Fietkau
cf2cf43717 ar71xx: extend ethernet DMA stuck check to all ar724x (and newer) chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48227
2016-01-13 16:22:05 +00:00
Felix Fietkau
826cfa5773 ar71xx: fix ap152 support
- ethernet gigabit pll
- switch configuration
- sysupgrade

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48187
2016-01-10 17:19:34 +00:00
John Crispin
9242d27b4a V2 ar71xx : Add Support for the Bitmain Antrouter R1
This patch adds support for the Bitmain Antrouter R1

http://wiki.openwrt.org/toh/bitmain/r1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 48058
2016-01-01 21:21:13 +00:00
John Crispin
772f9d4e32 ar71xx: Add support for AirTight Networks C-55
This patch is to add support for the AirTight Networks C-55 Access Point

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47973
2015-12-23 14:43:35 +00:00
Felix Fietkau
814d70b2fd ar8216: rework/fix AR8337 MAC swap handling
In r45970 the MAC swap handling was made opt-in, however some boards
have been forgotten during the conversion. Since the reference design
uses this MAC swapping, and pretty much all known boards using this chip
seem to do so too, enabling the swapping is a more reasonable default
than leaving it disabled.

Change the code to still allow boards to opt-out of this.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47956
2015-12-20 14:25:45 +00:00
Felix Fietkau
3fa85af5ad ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips
The following patch is to add ath79_register_m25p80_large, which sets
is_flash to false to support bit banging. This is needed on some 32MB+
SPI chips, such as the S25FL256S1

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47952
2015-12-19 11:32:20 +00:00
Felix Fietkau
3f184882e8 ar71xx: Kernel board definition for PowerCloud CR5000
Kernel part of support for the PowerCloud Systems CR5000.  The
    CR5000 is a dual-band 802.11n wireless router with 8MB flash,
    64 MB RAM, (unused in stock firmware) USB 2.0 port, and five
    port gigabit ethernet switch.  The CR5000 was sold as hardware for
    the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47940
2015-12-19 11:27:32 +00:00
Felix Fietkau
eef3b7acfb ar71xx: Kernel board definition for PowerCloud CR3000
Kernel part of support for PowerCloud CR3000.  The CR3000 is
    a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM,
    a four port fast ethernet switch, and a fast ethernet wan port which
    was sold by PowerCloud Systems as hardware for the Skydog
    cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47939
2015-12-19 11:27:25 +00:00
Felix Fietkau
4cc541756d ar71xx: Kernel board definition for PowerCloud CAP324
Kernel part of support for PowerCloud CAP324 Cloud AP.
    The CAP324 Cloud AP was a device sold by PowerCloud Systems as hardware for
    the CloudCommand service for 'cloud' based managment of large numbers
    access points.

    The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
    and 128MB RAM and single gigabit ethernet port.  It can be powered via PoE
    or a power adaptor.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47938
2015-12-19 11:27:19 +00:00
John Crispin
1f71f2220d ar71xx: add support for TRENDnet TEW-823DRU
Add support for TRENDnet TEW-823DRU:
- cpu: QCA9558 @720MHz
- flash: 16MB
- ram: 256MB
- 4+1 RJ45 100/1000Mbps
- wifi:  QCA9558 (bgn) and QCA9880-BR4A (ac)
- 1x USB 2.0

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 47927
2015-12-17 09:30:05 +00:00
Felix Fietkau
6505dc3367 ar71xx: clean up ethernet tx queue after reset, wake queues when done - fixes hangs reported in #18922
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47892
2015-12-14 20:22:09 +00:00
John Crispin
abc84551c0 ar71xx: add support for Cisco's MR18
This patch adds support for Cisco's MR18.
Detailed instructions for the flashing the device can
be found in the OpenWrt forum thread:
<https://forum.openwrt.org/viewtopic.php?id=59248>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47878
2015-12-12 06:42:29 +00:00
Felix Fietkau
0b6271faf4 ar71xx: reorganize target patches/files to make it possible to add boards without adding patch files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47874
2015-12-11 21:12:14 +00:00
Felix Fietkau
0186d4c2c2 ar71xx: on wnr2200, revert the mac0/mac1, the ethernet interfaces are swapped. use MAC1 for wlan
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47873
2015-12-11 21:12:04 +00:00
Felix Fietkau
6e12ef7430 ar71xx: fix MAC address swapping on WNR2200 and fix the WLAN MAC address
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47871
2015-12-11 19:21:59 +00:00
John Crispin
1dada3fc3c ar71xx: add LED driver NU801
The MR18 uses a 3-channel 16-bit PWM Constant Current Driver
for its status LED.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47848
2015-12-11 15:04:57 +00:00
John Crispin
eb8ff56684 ar71xx: Add support for Wallys DR344
This patch is for Wallys DR344 support under OpenWRT

Signed-off-by: Philippe Duchein <wireless-dev@duchein.net>

SVN-Revision: 47847
2015-12-11 15:04:47 +00:00
John Crispin
1a092ce0e0 ar71xx: add GL-Domino Pi support V3
This is the patch for GL-Domino Pi V3. Updated against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47622
2015-11-24 18:30:50 +00:00
John Crispin
a04c3e73a3 ar71xx: add GL-AR300 support V3
This is the patch for GL-AR300 V3, tested against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47621
2015-11-24 18:30:19 +00:00
John Crispin
72093bd528 ar71xx: add GL-AR150 support V3
This is the 3rd version. Modified against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47620
2015-11-24 18:29:59 +00:00
John Crispin
99fd9a7041 ar71xx: add support for the devolo dLAN Hotspot
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 47554
2015-11-21 21:24:18 +00:00
Hauke Mehrtens
fa137d51f5 ar71xx: add Arduino Yun
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83

The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.

Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47451
2015-11-10 23:13:09 +00:00
Felix Fietkau
7f75961e38 ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.

This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47420
2015-11-08 20:39:18 +00:00
Felix Fietkau
ae7e7239b8 ar71xx: Add support for ZyXEL NBG6616.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>

SVN-Revision: 47405
2015-11-07 12:51:39 +00:00
John Crispin
632c92094a ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power
Antminers using the stock bootloader will not hash without this GPIO set.
Applies to DD and CC

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 47261
2015-10-26 09:01:28 +00:00
John Crispin
fb152a810c ar71xx: Send power to USB port on WNR2200
This patch fixes ticket #15267 by enabling power on the
WNR2200's USB port. At present, the USB port on the WNR2200
is non-functional due to it not receiving power.

This patch defines an additional GPIO pin, but none of the
current GPIO definitions have been modified.

Signed-off-by: Riley Baird <BM-2cVqnDuYbAU5do2DfJTrN7ZbAJ246S4XiX@bitmessage.ch>

SVN-Revision: 47236
2015-10-19 18:18:12 +00:00
John Crispin
8d8a937272 ar71xx: Add Gainstrong MiniBox v1.0 support to trunk
This patch supersedes the v1 from September 17th.

Bumping the patch version - the MiniBox profile showed up under M, but
since it's called 'Gainstrong MiniBox v1.0' now it looks out of place.
Renamed the profile to gs-minibox-v1.mk to fix that.

The following patch adds support for the Gainstrong MiniBox into trunk
(or 'Designated Driver' :D ).

Fixed items:

- Inverted LED polarity (OOLITE seems to suffer from the same problem).
- Changed uppercase MINIBOX_V1_ prefix as requested.
- Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor).
- Mention the vendor (Gainstrong) in code headers.

Compiles fine, has been confirmed working by owners on 15.05.

Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c,
the MiniBox images build fine without, so I'm wondering: do I need to add
it in there as well? Any added benefit?

Thank you

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 47234
2015-10-19 17:55:25 +00:00
John Crispin
257e76a3df ar71xx: Bitmain Antminer S1 & S3 cleanup
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Other corrections such as the Machine Name and HWIDs
v2 corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 47221
2015-10-19 10:10:02 +00:00
Felix Fietkau
896d3e3e13 ar71xx: Add WeIO Board Support
Add support for WeIO board (http://we-io.net).
This board is based on Carambola2 board form 8Devices.

Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org> [some cleanups]

SVN-Revision: 47036
2015-09-24 09:08:47 +00:00
John Crispin
ac75fc8d98 ar71xx: add support for ap152 reference board
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46972
2015-09-16 08:33:14 +00:00