Commit graph

21542 commits

Author SHA1 Message Date
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
SVN-Revision: 32869
2012-07-25 19:36:19 +00:00
Felix Fietkau
5832e754fb mtd: fix trx_fixup
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'.  Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem.  I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.

Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 32866
2012-07-25 17:28:32 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk
SVN-Revision: 32865
2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk
SVN-Revision: 32862
2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk
SVN-Revision: 32861
2012-07-25 15:50:33 +00:00
Florian Fainelli
5b2450ef4f kmod-r6040 depends on PCI_SUPPORT
SVN-Revision: 32860
2012-07-25 15:50:29 +00:00
Florian Fainelli
3b5a8548f4 move mmc driver to target specific modules.mk
SVN-Revision: 32859
2012-07-25 15:50:26 +00:00
Florian Fainelli
18038c803c move ixp4xx-eth to target specific modules.mk
SVN-Revision: 32858
2012-07-25 15:50:23 +00:00
Florian Fainelli
53402a64b3 kmod-gpio-nxp74hc164 is not brcm63xx specific
SVN-Revision: 32857
2012-07-25 15:50:20 +00:00
Florian Fainelli
4000de357e move crypto module to target specific modules.mk
SVN-Revision: 32856
2012-07-25 15:50:16 +00:00
Florian Fainelli
a282e37c09 move i2c driver to target modules.mk
SVN-Revision: 32855
2012-07-25 15:50:13 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk
SVN-Revision: 32854
2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules
SVN-Revision: 32853
2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk
SVN-Revision: 32852
2012-07-25 15:50:02 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk
SVN-Revision: 32851
2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk
SVN-Revision: 32850
2012-07-25 15:49:54 +00:00
Florian Fainelli
29ccabae44 fix network devices modules to depend on PCI instead of x86
SVN-Revision: 32849
2012-07-25 15:49:52 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk
SVN-Revision: 32848
2012-07-25 15:49:49 +00:00
Florian Fainelli
276bc6b9e8 fix libsas and mvsas dependencies against PCI and not x86
SVN-Revision: 32847
2012-07-25 15:49:46 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk
SVN-Revision: 32846
2012-07-25 15:49:42 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
SVN-Revision: 32845
2012-07-25 14:52:00 +00:00
Florian Fainelli
ab2cb9ce61 add yet another framebuffer symbol
SVN-Revision: 32844
2012-07-25 14:01:57 +00:00
Florian Fainelli
89a312bf48 split framebuffer helper modules to their own packages
SVN-Revision: 32843
2012-07-25 14:01:54 +00:00
Florian Fainelli
ba9f6a46b1 remove broken flag
SVN-Revision: 32842
2012-07-25 14:01:51 +00:00
Florian Fainelli
03c06178e3 package buttons driver separately
SVN-Revision: 32841
2012-07-25 14:01:49 +00:00
Florian Fainelli
83b7462ac9 package cobalt lcd as a module
SVN-Revision: 32840
2012-07-25 14:01:46 +00:00
John Crispin
584bc13d38 use autoreconf hook instead of manual call
SVN-Revision: 32837
2012-07-25 10:34:06 +00:00
John Crispin
7ee4798be2 add unset CONFIG_FB_XGI to fix fullbuilds
SVN-Revision: 32836
2012-07-25 09:05:23 +00:00
John Crispin
94a550cc87 cleanup config-3.3, remove =m
SVN-Revision: 32835
2012-07-25 09:05:18 +00:00
John Crispin
1cbfa0c0f5 laguna: fix eeprom read buffer size during platform configuration
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

SVN-Revision: 32833
2012-07-25 08:01:38 +00:00
John Crispin
2113c65f95 fixes build for 3.x kernel and remove old 2.6.x references
Signed-off-by: christoph.thielecke@gmx.de

SVN-Revision: 32832
2012-07-24 23:07:35 +00:00
John Crispin
8029fefe5c package-version-override always calls autoreconf
make it conditional on the existance of autoreconf

Signed-off-by: Ryan Nowakowski <tubaman@fattuba.com>

SVN-Revision: 32831
2012-07-24 23:07:30 +00:00
John Crispin
7639c9b580 mac80211/hostapd: add support for HT capa in case of IBSS/RSN
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32830
2012-07-24 23:07:25 +00:00
John Crispin
8b3882224a wpa_supplicant: add more parameters
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32829
2012-07-24 23:07:15 +00:00
John Crispin
3f3268c0c2 hostapd: add pending patches
add patched needed to pass more parameters to the IBSS JOIN command

Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32828
2012-07-24 23:07:10 +00:00
John Crispin
0e9e7dcd10 adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
John Crispin
25482a60b3 add mktools and dosfstools which are needed for the raspberry pi
Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32824
2012-07-24 20:39:00 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
John Crispin
fb81e7a802 adds mkdapimg
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32822
2012-07-24 20:38:49 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
John Crispin
b891eec700 MI424WR - add rev D support
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
2012-07-24 20:38:36 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
John Crispin
543a2eca42 ext4 support
This patch adds the ext4 filesystem support to mountd. Tested with ext2, ext3
and ext4 partitions.

Signed-off-by: Jaroslaw Swierczynski <jarek1701@gmail.com>

SVN-Revision: 32818
2012-07-24 20:38:26 +00:00
John Crispin
ab05409315 add support for Rt3352 in rt2x00 driver
Forgot to do make package/mac80211/update, so the previously posted patch wasn't
in sync with compat-wireless. Now fixed.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32817
2012-07-24 20:38:20 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
2012-07-24 20:37:56 +00:00