Rework wpa_key_mgmt handling for wpa_supplicant to be consistent with
how it is done for hostapd.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commit modifies the /lib/netifd/proto/gre.sh script so that, when
GRE-TAP tunnels are created, either IPv4 or IPv6, the prefix before the chosen
interface name contains the "tap" substring, to differentiate them from non-TAP
GRE tunnels.
Right now, both GRE and GRE-TAP tunnel (either IPv4 or IPv6) interfaces defined
in /etc/config/network are named equally ("gre-"+$ifname or "grev6"+$ifname)
upon creation. For instance, the following tunnels:
config interface 'tuna'
option peeraddr '172.30.22.1'
option proto 'gre'
config interface 'tunb'
option peeraddr '192.168.233.4'
option proto 'gretap'
config interface 'tunc'
option peer6addr 'fdc5:7c9e:e93d:45af::1'
option proto 'grev6'
config interface 'tund'
option peer6addr 'fdc0:6071:1348:31ff::2'
option proto 'grev6tap'
are named, respectively, "gre-tuna", "gre-tunb", "grev6-tunc" and "grev6-tund".
The current change makes that each GRE tunnel interface of the four different
types available (gre, gretap, grev6 and grev6tap) gets a different prefix.
Therefore, the abovementioned tunnels will be named, respectively:
"gre4-tuna", "gre4t-tunb", "gre6-tunc" and "gre6t-tund".
This is coherent with other types of virtual interfaces (i.e. PPP, PPPoE, PPPoA)
where the whole protocol name is used. For instance, a PPPoA interface named
"p1" and a PPPoE interface named "p2" will respectively appear as "pppoa-p1"
and "pppoe-p2", not as "ppp-p1" and "ppp-p2").
Since Linux interfaces names are limited to 15 characters, these prefixes leave,
for the worst case (TAP tunnels), 9 characters for the actual name.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Other changes:
- Project moved to sourceware.org
- musl patch where cleaned up and submitted upstream
- TEMP_FAILURE_RETRY macro fixed and submitted upstream
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[Jo-Philipp Wich: add missing .patch extension to 007-fix_TEMP_FAILURE_RETRY]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Brings in the following changes:
84b530a732b1 libfstools: Check return values for fread and system
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Brings in the following changes:
52d955fd802a remove obsolete mac os x /opt/local include/library search path
a4e49b4163b2 Fix unused results warnings
48cfff3fbec9 uclient-http: send correct "Host:" header if port is set
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.
Signed-off-by: Mathias Kresin <dev@kresin.me>
currently (after blogic's edit to my commit) it prints like this:
root@lede:/# service aa
aa does not exist. the following services are available :adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.
with this commit it looks like this:
root@lede:/# service
service "" not found, the following services are available:
adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.
Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
This fixes the folowing security problems:
CVE-2016-9586: printf floating point buffer overflow
CVE-2016-9952: Win CE schannel cert wildcard matches too much
CVE-2016-9953: Win CE schannel cert name out of buffer read
CVE-2016-9594: unititialized random
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently both libustream-polarssl and libustream-mbedtls
variants define themselves as the DEFAULT_VARIANT
Remove extra DEFAULT_VARIANT from libustream-polarssl.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Later OpenVPN 2.3-openssl versions only enable
TLS cipher suites with perfect forward secrecy, i.e. DHE and ECDHE
cipher suites. ECDHE key exchange is not supported by
OpenVPN 2.3-openssl, enable DHE key exchange to allow LEDE
OpenVPN 2.4-mbedtls clients to connect to such servers.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Lucian Cristian <luci@createc.ro>
Secp384r1 is the default curve for OpenVPN 2.4+. Enable this to
make OpenVPN-mbedtls clients able to perform ECDHE key exchange
with remote OpenVPN 2.4-openssl servers that use the default
OpenVPN curve.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The external script used to generate the package lists for the
LEDE wiki's table of packages [1] and package indexes [2] requires
a "Source:" field in the package lists to find package makefiles.
The package makefiles are used to read the package's Category and Submenu.
The "Source:" field was removed in commit
b4aa3c899c
to reduce package list sizes and lessen opkg issues in low ram devices.
Add a separate package list file with full data to be used by the wiki's script.
It's called Packages.manifest and isn't compressed as it's not necessary.
1. https://lede-project.org/packages/start
2. https://lede-project.org/packages/index/start
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
64a655d proto: allow configuring deprecated static IPv6 addresses
c99182e remove obsolete /opt/local prefix on Mac OS X
0249d5f system-linux: Don't set gre tunnel ttl by default to 64 (#FS312)
edc15ca ubus: Display the IPv6 prefix assigned address
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
We do not have the needed platform support for VOICE_CPE_VMMC_PMC. The
vmmc driver will not compile with this option activated.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add patches provided upstream [1] by Fabio Berton to fix error:
> ./gencode.c: In function 'pcap_compile':
> ./gencode.c:693:8: error: 'compiler_state_t {aka struct _compiler_state}' has no member named 'ai'
> cstate.ai = NULL;
> ^
> ./gencode.c: In function 'gen_gateway':
> ./gencode.c:4914:13: error: 'cstate' undeclared (first use in this function)
> bpf_error(cstate, "direction applied to 'gateway'");
> ^
[1] https://github.com/the-tcpdump-group/libpcap/pull/541
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
add possibility to set the facility to which dnsmasq will send syslog entries, i.e. set it to '/dev/null' to mute dnsmasq output at all.
Signed-off-by: Dirk Brenken dev@brenken.org
Before the rewrite, uhttpd-mod-tls used to contain a tls plugin.
Afterwards it was left in for compatibility reasons, but given how much
has changed, and that we're about to change the default SSL
implementation again, it's better to just drop this now
Signed-off-by: Felix Fietkau <nbd@nbd.name>
