Commit graph

11646 commits

Author SHA1 Message Date
Luka Perkov
b58e65f2ee imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40531
2014-04-19 21:39:04 +00:00
John Crispin
c4aae8fbc5 lantiq: ARV7519RW22: several fixes
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40519
2014-04-16 12:01:09 +00:00
Zoltan Herpai
ba62f78e2e sunxi: remove mainlined patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40512
2014-04-14 21:36:39 +00:00
Gabor Juhos
1374e5a721 ar71xx: rb91x: fix ethernet packet loss issues
The RB91x boards are suffering from ethernet packet loss after a cold
boot. The cause of the problem is that the AR8035 PHYs requires special
register settings to work reliably on these boards.

Enable the RGMII TX, RX delays and disable SmartEE functionality of
the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register
to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40509
2014-04-13 20:41:52 +00:00
Gabor Juhos
46a8af4c47 ar71xx/mikrotik: enable the AT803x PHY driver
It will be used on the RB91x boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40508
2014-04-13 20:41:51 +00:00
Gabor Juhos
02ea5b9e56 ar71xx: allow to configure AR803x PHYs via platform data
Add a patch for the at803x phy driver, in order to be able
to configure some register settings via platform data.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40507
2014-04-13 20:41:50 +00:00
Gabor Juhos
27dec09907 ar71xx: add phy_mmd_{read,write} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40506
2014-04-13 20:41:48 +00:00
Gabor Juhos
6a0f8ea201 ar71xx: enable console on the RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40505
2014-04-13 20:41:42 +00:00
John Crispin
010dcd092f ralink: add port_init for rt2880
Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40504
2014-04-13 18:01:08 +00:00
Gabor Juhos
0d7197116e ar71xx: add profile and build image for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: remove the non-existing zyxelnand subtarget specific stuff]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40502
2014-04-13 08:29:09 +00:00
Gabor Juhos
ecec091d33 ar71xx: add user-space support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40500
2014-04-13 08:29:07 +00:00
Gabor Juhos
a5e398abad ar71xx: add kernel support for ZyXEL NBG 6716
With this patch OpenWRT supports the following on the ZyXEL NBG 6716:
-WiFi 2G (ath9k)
-WiFi 5G (ath10k)
-NAND flash
-2 Ethernet interfaces
-USB 2.0
-LEDs including switch
-reasonale defaults at first boot

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg:
  - rename and refresh kernel patch,
  - fix a few typos,
  - change button key codes,
  - use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40499
2014-04-13 08:29:05 +00:00
John Crispin
9fbbd04f45 lantiq: enable switch on td8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40498
2014-04-12 21:22:21 +00:00
John Crispin
f2b0a6365e Fix ARV7519RW images
This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40495
2014-04-12 21:22:08 +00:00
John Crispin
7ae1d573ae Fix Asus rt-n15 board support
* gpio leds and buttons
* ethernet

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40494
2014-04-12 21:22:04 +00:00
John Crispin
3d6ba83fe4 rt2880 DT fixes
* add pinctrl
* fix ethernet port
* make wifi available by default

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40493
2014-04-12 21:22:00 +00:00
John Crispin
fa86c30538 Fix pinmux-rt2880
The last arg to FUNC() is count, not last pin.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40492
2014-04-12 21:21:56 +00:00
John Crispin
73160c1ad6 Add wmac clock for rt2880
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40491
2014-04-12 21:21:53 +00:00
John Crispin
72803e0e27 Don't try to generate whr-g300n image if it's going to be more than 4M
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40489
2014-04-12 21:21:44 +00:00
Gabor Juhos
22916814e3 ar71xx: build firmware image for the WNDR3700 v4 board
Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40481
2014-04-12 20:22:41 +00:00
Gabor Juhos
a67578ce33 ar71xx/image: allow to use more arguments for some macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40480
2014-04-12 20:00:37 +00:00
Gabor Juhos
4149ab5193 ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files
Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300
is the same device. Indicate this in the kernel files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40479
2014-04-12 19:58:23 +00:00
Gabor Juhos
7b85e2e527 ar71xx: wndr4300: enable 5V power for the USB port
The 5V power of the USB is controlled by a GPIO pin of
the external WiFi chip. Setup the GPIO bitmasks in the
platform data of the WiFi chip to ensure that the 5V
power gets enabled by the ath9k driver.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40478
2014-04-12 19:58:20 +00:00
Gabor Juhos
ed72141fd4 ar71xx: wndr4300: use KEY_RFKILL code for the Wireless button
Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40477
2014-04-12 17:53:34 +00:00
Gabor Juhos
b971a4b5b9 ar71xx: add default LED config for WiFi LEDs on the WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40476
2014-04-12 17:42:36 +00:00
Gabor Juhos
4fe71cedfe ar71xx: wndr4300: add LED for 2.4Ghz wifi interface
Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40475
2014-04-12 17:42:35 +00:00
Gabor Juhos
db123a8a21 ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs
The bootloader does not initializes the output function
correctly for all LEDs. DO that from the board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40474
2014-04-12 17:42:34 +00:00
Gabor Juhos
9b7b57aeb4 ar71xx: wndr4300: change 'orange' to 'amber' in LED color names
The hardware manual says amber so change the color part of
the LED names to reflect that. Also update the constant names.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40473
2014-04-12 17:42:33 +00:00
Gabor Juhos
a93c87d772 ar71xx: fix typos in TP-Link rssileds definition
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5109/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40472
2014-04-12 16:01:45 +00:00
Gabor Juhos
087547d3e2 ar71xx: add rssileds for Ubiquiti XM boards
Adds support for the received signal strength indicator LEDs of the
Bullet M, Nanostation M and Rocket M devices.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5108/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40471
2014-04-12 16:01:43 +00:00
Gabor Juhos
f79b613934 x86/net5501: remove broken flag
According to Christophe, the kernel boots on the Soekris net5501
board.

Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40468
2014-04-12 12:05:18 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos
17f848538c ar71xx: fix image generation
Move the comments out from the shell script to fix build
breakage introduced in r40464.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40466
2014-04-12 11:59:05 +00:00
Gabor Juhos
cd75606712 ar71xx: avoid spurious restarts caused by the watchdog on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40465
2014-04-12 10:21:04 +00:00
Gabor Juhos
fd53cfa31b ar71xx: add comments for image Makefile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5075/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40464
2014-04-12 09:52:58 +00:00
Gabor Juhos
1bce5e8328 ar71xx: initial support for TP-Link Archer C7v2
The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver.
The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1.

Signed-off-by: Adam Serbinski <adam@serbinski.com>
Patchwork: http://patchwork.openwrt.org/patch/5071/
[juhosg:
 - remove the v2 specific profile add the ath10k driver to the existing
   Archer C7 profile instead. Although on v1 devices it does not change
   the non-working behaviour, but the ath10k driver is useful for users
   whom have replaced the wifi card with a supported one in their units.
 - update image/Makefile to build firmware image for both boards if the
   Archer C7 profile is selected]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40463
2014-04-12 09:52:54 +00:00
Florian Fainelli
658648d032 brcm2708: add missing configuration symbols
Spotted by buildbot and while doing a CONFIG_ALL=y build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 40462
2014-04-11 22:38:54 +00:00
John Crispin
60edb8f47b lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40461
2014-04-11 20:40:34 +00:00
John Crispin
390e856cb2 lantiq: more vdsl related cleanups
* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40460
2014-04-11 20:40:24 +00:00
Felix Fietkau
83e32c8f6a x86_64: add usb support (including storage) to the kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40455
2014-04-11 13:22:28 +00:00
Felix Fietkau
f7e747baa9 x86: set default kernel version to 3.10
Place the previous selection (3.3.8) into the only subtarget that did
not override it to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40454
2014-04-11 13:22:24 +00:00
Felix Fietkau
c3cc517071 x86: remove linux 3.8 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40453
2014-04-11 13:22:19 +00:00
Imre Kaloz
25e36d379e generate esxi compatible vmdks, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40452
2014-04-11 10:19:26 +00:00
Imre Kaloz
ced772a055 reuqire qemu-img to be installed (the one we have in tools is too old)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40451
2014-04-11 10:14:57 +00:00
Felix Fietkau
25a1dcb37b generic: remove obsolete symbol export from block2mtd init patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40445
2014-04-10 14:43:22 +00:00
Felix Fietkau
f02e3a2a4a x86: try harder to attach block2mtd to fix boot issues on devices with longer delays
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40444
2014-04-10 14:43:17 +00:00
Imre Kaloz
fa146ecaa3 specify the adapter type for the vmdk conversion
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40442
2014-04-10 11:09:27 +00:00
John Crispin
eebc673f1e lantiq: move the dsl-modem config to network.@dsl-modem[-1]
make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40439
2014-04-10 08:14:33 +00:00
John Crispin
f1963c02f4 lantiq: make dsl_notify.sh executable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40436
2014-04-09 16:31:14 +00:00
Imre Kaloz
dd16b16dec enable native KVM and VMware drivers
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40434
2014-04-09 11:54:44 +00:00