Commit graph

78 commits

Author SHA1 Message Date
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
John Crispin
d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin
e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
John Crispin
90a3761b0b default switch setup for WBMR
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
John Crispin
9818a1f00b adds script to set wps info on boards with a wps button
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
John Crispin
59cc6d9ddd improve button handling
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
John Crispin
687920ba3e minor basefiles fixes
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
John Crispin
1dece11487 cleanup basefiles
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
Luka Perkov
4c76b3635b lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
2012-09-06 00:09:46 +00:00
Luka Perkov
7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
Gabor Juhos
ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
John Crispin
81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin
d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Mirko Vogt
87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
John Crispin
f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin
1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin
976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
John Crispin
49eb3fd845 gigaset 76x
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
2012-01-17 12:10:35 +00:00
John Crispin
4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
John Crispin
bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin
a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin
832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin
2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin
3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin
6608f419d1 * backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
John Crispin
9f47e80bb3 adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00