Commit graph

29 commits

Author SHA1 Message Date
John Crispin
d5b734e145 hostapd: Add wpa_psk_file option to netifd.sh
The wpa_psk_file option offers the possibility to use a different WPA-PSK key for each client. The directive points to a file with the following syntax:

mac_address wpa_passphrase_or_hex_key

Example:

00:11:22:33:44:55 passphrase_for_client_1
00:11:22:33:44:67 passphrase_for_client_2
00:11:22:33:44:89 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef

So it is possible to specify both ASCII passphrases and raw 64-chars hex keys.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 43001
2014-10-20 11:19:21 +00:00
John Crispin
70d56d749b hostapd: read missing parameter for dynamic VLANs
In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming
parameter is not read while setting up the config, so it always
defaults to 1.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 42787
2014-10-06 04:52:21 +00:00
Felix Fietkau
281f40cef2 hostapd: allow using iapp for any encryption type (fixes #18022)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42764
2014-10-05 10:55:55 +00:00
John Crispin
ed2fff7452 hostapd: do not remove foreign wpa_supplicant sockets
https://dev.openwrt.org/ticket/17886

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42586
2014-09-17 07:41:31 +00:00
Felix Fietkau
7ff276afd3 hostapd: remove bogus default setting for wps_pin (#17873)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42553
2014-09-15 16:09:23 +00:00
Luka Perkov
bc69ee8eab hostapd: fix some whitespaces
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42111
2014-08-11 08:44:48 +00:00
Jo-Philipp Wich
b6153f92ad hostapd: Reintroduce Full Dynamic VLAN support
This patch brings full dynamic vlan support to netifd that existed in hostapd.sh in Attitude Adjustment.

Signed-off-by: Joseph CG Walker <Joe@ChubbyPenguin.net>
[jow@openwrt.org: changed commit message, rebased on top of current hostapd.sh]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41872
2014-07-29 09:48:02 +00:00
Felix Fietkau
b24e77714e hostapd: add a require_mode option in wifi-device sections to select the minimum hardware mode that the AP requires from clients
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41665
2014-07-15 10:30:08 +00:00
Felix Fietkau
c20bb27aad hostapd: move reading of rsn_preauth out of auth_type=eap context
rsn_preauth is used outside of "case $auth_type", so if it is set
for an EAP-enabled SSID, it would also be set for the following
non-EAP-enabled SSIDs, because it would not be read again.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 41012
2014-06-05 11:55:36 +00:00
Felix Fietkau
b8d190da1f hostapd: replace undefined $bridge with $network_bridge
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 41002
2014-06-04 11:51:59 +00:00
John Crispin
3bc4516ebb hostapd: Add optional support for hostapd own_ip_addr in wireless config
`own_ip_addr` is used by hostapd as NAS-IP-Address.
This is used to identify the AP that is requesting the authentication of the
user and could be used to define which AP's can authenticate users.
Some vendors implement only NAS-Identifier or NAS-IP-Address and not both.
This patch adds ownip as an optional parameter in /etc/config/wireless.

Signed-off-by: Thomas Wouters <thomaswouters@gmail.com>

SVN-Revision: 40934
2014-06-02 12:44:40 +00:00
Felix Fietkau
26044703a4 hostapd: add an option for 802.11h (enabled by default)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40690
2014-05-03 21:14:48 +00:00
John Crispin
3bc77db5f5 802.11s: fix authsae support in netifd
This patch implements support for 802.11s protected mesh wireless networks (using authsae) in the netifd framework.

Until meshd-nl80211 implements a proper -P option for the PID file, this uses shell backgrounding in order to be able to get the PID for the process.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 40497
2014-04-12 21:22:17 +00:00
Felix Fietkau
0d7e8ba3a9 hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)
r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but
apparently did not provide a default value 0.

When that option's non-existing value is later evaluated in
/lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in
syslog if user has not set the wps_pbc_in_m1 option. The error materialises
only if user has enabled wps.
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number

Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3

Error is caused by line 282:
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282

My patch sets the parameter's default value to 0, which does nothing. The
default might also be set a bit later in the function, but this felt like the
most clear place to do that.

Signed-off-by hnyman <hannu.nyman@iki.fi>

SVN-Revision: 40469
2014-04-12 14:28:34 +00:00
Felix Fietkau
c53c7a0fe0 hostapd: add pbc_in_m1 option
Option pbc_in_m1 is being used as a WPS capability discovery
workaround for PBC with Windows 7.
Add possibility to enable this workaround from UCI.

To enable it, turn on wps and set wps_pbc_in_m1 parameter to 1.

Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com>

SVN-Revision: 39995
2014-03-21 15:55:03 +00:00
John Crispin
26e850dafa hostapd: add validation rules to wireless handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39620
2014-02-18 13:33:59 +00:00
Felix Fietkau
50417b58ad hostapd: do not get basic_rate as a simple string variable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39448
2014-02-02 14:25:02 +00:00
Felix Fietkau
cfc20090f1 hostapd: fix basic rate list handling with netifd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39431
2014-01-31 10:43:18 +00:00
Jo-Philipp Wich
b5400c775e hostapd: Fix 80211w setup with netifd
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 39412
2014-01-28 21:12:45 +00:00
Jo-Philipp Wich
c1cb867c13 hostapd: Fix basic_rate setup with netifd
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 39411
2014-01-28 21:12:36 +00:00
John Crispin
4ae2d6f293 hostapd: fix mcast_rate setting
Introduced by ("netifd: add wireless configuration support and port mac80211 to
the new framework")

Reported-by: René van Weert <r.vanweert@sowifi.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

SVN-Revision: 39288
2014-01-14 19:35:55 +00:00
John Crispin
2f9048d8d3 hostapd: fix frequency setting for IBSS/RSN
Introduced by ("netifd: add wireless configuration support and port mac80211 to
the new framework")

Reported-by: René van Weert <rene@sowifi.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

SVN-Revision: 39231
2014-01-12 12:07:11 +00:00
Felix Fietkau
c7d23cbeb9 hostapd: fix mixed wep/wpa with netifd
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>

SVN-Revision: 39174
2013-12-28 11:07:37 +00:00
Felix Fietkau
da886d761a hostapd: fix the uci option name for ap isolate
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39173
2013-12-28 11:07:28 +00:00
Felix Fietkau
aab522e1e3 hostapd: fix wep with netifd
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>

SVN-Revision: 39156
2013-12-23 12:11:28 +00:00
Jo-Philipp Wich
32223b3c4d hostapd: fix short_preamble option
SVN-Revision: 39027
2013-12-10 16:24:48 +00:00
Jo-Philipp Wich
18dd101903 hostapd: properly parse wmm and hidden uci options (#14589)
SVN-Revision: 39005
2013-12-08 20:51:21 +00:00
Felix Fietkau
603c532eed hostapd: fix maclist processing with netifd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38991
2013-12-03 09:02:58 +00:00
Felix Fietkau
498d84fc4e netifd: add wireless configuration support and port mac80211 to the new framework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38988
2013-12-02 16:41:03 +00:00