Commit graph

27 commits

Author SHA1 Message Date
Luka Perkov
9f4e0c7751 oxnas: add missing semicolon
A missing semicolon in the gpio-keys-polled section of ox820-akitio.dts
caused the build to break. Add it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49219
2016-04-24 16:42:14 +00:00
Hauke Mehrtens
012da658a4 oxnas: add support for Akitio MyCloud mini
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49197
2016-04-19 20:12:41 +00:00
John Crispin
e9db6eb8b2 oxnas: sync cpu-hotplug with mach-realview
Make mach-oxnas/hotplug.c look more similar to mach-realview/hotplug.c,
just cosmetics and maintainability concerns, no functional changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49044
2016-03-20 14:41:29 +00:00
John Crispin
b64f159bc8 oxnas: add spinlock in pinctrl driver
Try to address a race-condition in pinctrl-oxnas.c

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49043
2016-03-20 14:41:25 +00:00
John Crispin
daf7ab04ba oxnas: also reset GPIO B registers on boot
Clear both, SYS_CTRL_*_SEL and SEC_CTRL_*_SEL on boot instead of
writing to SYS_CTRL_*_SEL twice which looks like a copy-paste error.
Thanks to anonymous to bring this up in #21892!

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49042
2016-03-20 14:41:21 +00:00
John Crispin
300be15e84 oxnas: complete NAND driver clean-up
some bit rot was accidentally left-out in r48986, remove it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48997
2016-03-10 21:19:58 +00:00
John Crispin
61f27ca3e4 oxnas: clean-up NAND driver to fix probing issue
A re-write of the driver based on xway_nand.c and constants as
well as the cmd_ctrl() function from the original oxnas_nand.c
resulted in a extremely similar looking file (see diffsize),
and fixes the issue of NAND not being detected on newer kernels.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48986
2016-03-10 19:11:28 +00:00
Felix Fietkau
cee6c07cf3 oxnas: prepare platform and drivers for Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48338
2016-01-18 23:34:51 +00:00
John Crispin
6944a95091 oxnas: move gmac soc glue from mach to stmmac driver
Still a lot of kernel-version ifdef'ery, but imho that's easy to remove
once obsoleted and avoids duplicate code in the meantime.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47218
2015-10-19 10:09:36 +00:00
John Crispin
54b8ddf9e7 oxnas: prepare pinctrl for kernel >=4.2
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47217
2015-10-19 10:09:30 +00:00
John Crispin
26329f650c oxnas: prepare irqchip driver for kernel >=4.2
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47216
2015-10-19 10:09:23 +00:00
John Crispin
392b93f579 oxnas: fix duplicate include in clk-oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47215
2015-10-19 10:09:16 +00:00
John Crispin
ec9ffe892f oxnas: remove obsolete __cpuinit
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47214
2015-10-19 10:09:07 +00:00
John Crispin
7261fde797 oxnas: prepare for kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46636
2015-08-17 06:03:57 +00:00
John Crispin
35c52bc261 oxnas: remove pre kernel 3.18 support from pinctrl driver
just some pruning...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44923
2015-03-21 21:47:20 +00:00
Felix Fietkau
2ef587a8fc oxnas: clk-oxnas: rework pllb enable function
kernel lock debugging unveiled that we should not call
of_reset_control_get inside a clock's enable operation (see below)

move of_reset_control_* previously used in pllb_clk_enable to new
pllb_clk_prepare and pllb_clk_unprepare functions.
use a container to carry runtime information.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xb8/0xfc()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.26 #6
[<c001a6ac>] (unwind_backtrace) from [<c0016dec>] (show_stack+0x10/0x14)
[<c0016dec>] (show_stack) from [<c0194f68>] (dump_stack+0x7c/0x94)
[<c0194f68>] (dump_stack) from [<c0021b50>] (warn_slowpath_common+0x68/0x8c)
[<c0021b50>] (warn_slowpath_common) from [<c0021ba4>] (warn_slowpath_fmt+0x30/0x40)
[<c0021ba4>] (warn_slowpath_fmt) from [<c0061b30>] (lockdep_trace_alloc+0xb8/0xfc)
[<c0061b30>] (lockdep_trace_alloc) from [<c00cb740>] (kmem_cache_alloc+0x1c/0xf8)
[<c00cb740>] (kmem_cache_alloc) from [<c01d33c8>] (of_reset_control_get+0xe8/0x12c)
[<c01d33c8>] (of_reset_control_get) from [<c0269228>] (pllb_clk_enable+0x14/0xbc)
[<c0269228>] (pllb_clk_enable) from [<c0265738>] (__clk_enable+0x54/0xa0)
[<c0265738>] (__clk_enable) from [<c0265acc>] (clk_enable+0x18/0x2c)
[<c0265acc>] (clk_enable) from [<c04325f8>] (oxnas_pcie_probe+0x3b8/0x6a0)
[<c04325f8>] (oxnas_pcie_probe) from [<c01f2510>] (platform_drv_probe+0x18/0x48)
[<c01f2510>] (platform_drv_probe) from [<c01f1070>] (driver_probe_device+0xd8/0x24c)
[<c01f1070>] (driver_probe_device) from [<c01f1298>] (__driver_attach+0x70/0x94)
[<c01f1298>] (__driver_attach) from [<c01ef728>] (bus_for_each_dev+0x4c/0x98)
[<c01ef728>] (bus_for_each_dev) from [<c01f0818>] (bus_add_driver+0xcc/0x1e8)
[<c01f0818>] (bus_add_driver) from [<c01f169c>] (driver_register+0xa0/0xe8)
[<c01f169c>] (driver_register) from [<c01f2568>] (platform_driver_probe+0x20/0xa4)
[<c01f2568>] (platform_driver_probe) from [<c0013a3c>] (do_one_initcall+0x90/0x140)
[<c0013a3c>] (do_one_initcall) from [<c0421d38>] (kernel_init_freeable+0x1e4/0x2c0)
[<c0421d38>] (kernel_init_freeable) from [<c000c214>] (kernel_init+0x8/0x104)
[<c000c214>] (kernel_init) from [<c0008768>] (ret_from_fork+0x14/0x2c)
---[ end trace 5f17ed2f61e0683f ]---

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43787
2014-12-27 13:03:12 +00:00
Felix Fietkau
93192e65e8 oxnas: sata_oxnas: make irq handler more readable
safed one level of indention by using 'continue' instead of a
lengthy if-clause.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: use logic-AND instead of '?' operator when checking for hw bug 6320

SVN-Revision: 43768
2014-12-22 20:47:10 +00:00
Felix Fietkau
74a9e1c1b0 oxnas: sata_oxnas: refactoring phase 2
- replaced // comments by /* comments */
 - added line-breaks where needed
 - fixed white-space according to kernel style
 - fixed some obvious spelling mistakes in comments and printks
 - removed some unneeded left-overs imported from vendor code-base
 - replaced printk(...) by libata macros where possible

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43767
2014-12-22 20:47:01 +00:00
Felix Fietkau
feda47451f oxnas: sata_oxnas: refactoring phase 1
locking for 2nd port and hwraid was added from vendor's GPL code which
doesn't comply with current kernel coding style.

 - moved all global variables into host_priv
 - renamed locks
 - sanetized acquire() and release() parameter list

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43766
2014-12-22 20:46:49 +00:00
John Crispin
10dbdb28d7 oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
2014-12-13 08:04:54 +00:00
John Crispin
9013a144fd oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
2014-12-13 08:02:52 +00:00
John Crispin
118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
2014-12-12 20:24:33 +00:00
John Crispin
9432cbd577 oxnas: add support for 2nd S-ATA port to sata_oxnas driver
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.

this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43598
2014-12-10 15:51:07 +00:00
John Crispin
1fa7c8587d oxnas: add copyright header to sata_oxnas
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43597
2014-12-10 15:51:00 +00:00
John Crispin
46814be2a8 oxnas/kd20: use gpio-beeper
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
2014-12-02 15:25:09 +00:00
John Crispin
aa9141046f oxnas: ehci: rename vendor prefix plxtch to plxtech
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43474
2014-12-01 16:15:30 +00:00
John Crispin
72b58f2eb1 add new target 'oxnas'
This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
 PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
 Oxford Semiconductor OXE810SE/OXE815/OX820/...

For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
 fully supported

Cloud Engines Pogoplug Pro (with PCIe)
 fully supported

MitraStar STG-212
 aka ZyXEL NSA-212,
 aka Medion Akoya P89625 / P89636 / P89626 / P89630,
 aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
 fully supported, see http://wiki.openwrt.org/toh/medion/md86587

Shuttle KD-20
 partially supported (S-ATA driver lacks support for 2nd port)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43388
2014-11-26 09:00:08 +00:00