KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
32474 commits 1 branch 0 tags 154 MiB
Commit graph

35 commits

Author SHA1 Message Date
John Crispin
9dfe1f6fbe ramips: make pinctrl work on newer socs 
newer socs have 2 mux registers

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46952
 2015-09-16 08:29:45 +00:00
John Crispin
710520d5c7 ramips: make the mt7628 spi driver work for both cs lines 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46951
 2015-09-16 08:29:40 +00:00
John Crispin
6f07b8a659 ramips: make the early_printk code detect which uart is used 
only tested on mt7628

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46950
 2015-09-16 08:29:31 +00:00
Felix Fietkau
fcee359813 ramips: fix chunked-io support for big flash chips (#20504) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46904
 2015-09-14 06:54:15 +00:00
Jonas Gorski
7d6cff4882 kernel: update 3.18 to 3.18.21 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
 2015-09-02 10:18:15 +00:00
Felix Fietkau
7747092ed1 ramips: fix devicetree corruption with some boot loaders if the caches are not ready at boot 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46766
 2015-09-02 09:24:05 +00:00
John Crispin
402c2d008b ramips: move patches around 
0073 needs to applied afert 0102

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46667
 2015-08-17 10:13:46 +00:00
John Crispin
aa4c6e27b4 ramips: reorder patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46659
 2015-08-17 06:18:30 +00:00
John Crispin
87df7da757 ramips: Fix MT7621 pinmux bits for uart3, uart2, mdio 
The MT7621 uses a 2 bit wide configuration of the sdhci, spi, mdio, pcie,
wdt, uart2 and uart3 in the GPIO_MODE register. It was correctly done
for sdhci, spi, pcie and wdt, The same has to be done for uart3, uart2
and mdio.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46645
 2015-08-17 06:15:49 +00:00
John Crispin
09851afd33 ramips: Fix amount of MT7621 pins controlled by spi group 
The PINS conntrolled by the SPI bits in the GPIO_MODE register is always
7 and not 8 for nand mode.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46644
 2015-08-17 06:15:44 +00:00
John Crispin
9ed654e389 ramips: Fix uart2/uart3 pinmux order on MT7621 
The uart3 setting in GPIO_MODE register is before the uart2 setting. Also
don't mix uart2 and uart3 function/groups.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46643
 2015-08-17 06:15:34 +00:00
Hauke Mehrtens
0b8643af4f kernel: update 3.18 to 3.18.20 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46570
 2015-08-09 11:09:52 +00:00
John Crispin
351a55ac29 ramips: add CD polling to sd driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46475
 2015-07-24 09:12:10 +00:00
John Crispin
ebe957fad6 ramips: various mt7688 pinmux fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46474
 2015-07-24 09:12:02 +00:00
John Crispin
7449ea88db ramips: add clock strecthing support to i2c driver 
fixes #19816

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46472
 2015-07-24 09:11:42 +00:00
Jonas Gorski
901a7fa067 kernel: update 3.18 to 3.18.17 
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46150
 2015-06-30 23:26:09 +00:00
Rafał Miłecki
3cb077111a ramips: refresh patch with USB_MT7621_XHCI_PLATFORM 
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46085
 2015-06-21 14:02:13 +00:00
John Crispin
765efbf10e ramips: fix a bug in the cevt code on mt7620 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46038
 2015-06-18 11:57:07 +00:00
Jonas Gorski
9a59b350b7 kernel: update 3.18 to 3.18.16 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
 2015-06-17 09:54:55 +00:00
Felix Fietkau
d7023e105f ramips: enable highmem support for mt7621 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45889
 2015-06-04 21:45:12 +00:00
Felix Fietkau
7a23eae245 ramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues with kernel_menuconfig 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45888
 2015-06-04 21:45:01 +00:00
John Crispin
3f9999b44b ramips: dont set illacc to y by default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45795
 2015-05-27 20:06:06 +00:00
Jonas Gorski
caea19a3e0 ramips: fix hang on boot on rt305x 
Fix an upstream regression on 3.18+ that causes rt305x based devices
to hang on boot.

Fixes #19715.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45747
 2015-05-25 18:02:32 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
 2015-05-21 19:32:46 +00:00
Imre Kaloz
f86c07d8d4 The ability to read MAC addresses from MTD is useful for other targets besides ramips and lantiq as well. 
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45596
 2015-05-03 17:56:32 +00:00
John Crispin
03dd7b6bdb ralink: the systick clocksource was calculating a bad bogo mips value 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45554
 2015-04-21 12:42:42 +00:00
John Crispin
607a7a35be ralink: fix cevt-r4k hack 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45342
 2015-04-10 08:27:44 +00:00
John Crispin
ddb5ab2acf ralink: mt7621 add ECHI OCHI XCHI support 
Lets hope that this time it won't break the other ralink targets.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45067
 2015-03-27 19:07:29 +00:00
John Crispin
40d25d3eb5 ralink: drop xhci patch, it break !mt7621 builds 
will re-add it tomorrow after fixing it

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45028
 2015-03-26 16:24:19 +00:00
John Crispin
2cedb63d84 ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 45027
 2015-03-26 14:49:26 +00:00
John Crispin
0a9e38bb21 ralink: mt7621 add ECHI OCHI XCHI support 
The usb stroage not working since updated 3.18. Porting from MTK's source code.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45021
 2015-03-26 10:59:51 +00:00
John Crispin
10aa09b731 ralink: MT7621 add i2c controller driver 
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.

Signed-off-by: Jay Weng <fl.service@t-firefly.com>

SVN-Revision: 45018
 2015-03-26 10:59:31 +00:00
John Crispin
52b2a2c398 ralink: bump to v3.18 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44495
 2015-02-19 14:04:47 +00:00
John Crispin
44b929fcdd ralink: make the mt7621 irq core with with the new CM api 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44418
 2015-02-12 08:07:39 +00:00
John Crispin
654bc380ec ralink: add 3.18 support 
keep default as 3.14, mt7621 gic need to be ported to 3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44349
 2015-02-09 12:13:55 +00:00