Commit graph

14950 commits

Author SHA1 Message Date
Yangbo Lu
984cf8d89d layerscape: update ppfe-firmware to LSDK-18.06
This patch is to update ppfe-firmware to LSDK-18.06 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
c19f520686 layerscape: update ls-mc to LSDK-18.06
This patch is to update ls-mc to LSDK-18.06 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
e4fee592ea layerscape: update ls-dpl to LSDK-18.06
The dpl-examples source code had been migrated to
codeaurora for LSDK-18.06 release and the future
release. This patch is to update this package to
LSDK-18.06.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
56853409c4 layerscape: update fman-ucode to LSDK-18.06
Actually there was no change for fman-ucode in LSDK-18.06
just tagged with LSDK-18.06. This patch is to rework the
fman-ucode makefile to make it more readable, and to use
lsdk-1806 as the PKG_VERSION.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:55 +02:00
Jasper Scholte
a689307c97 sunxi: build image/uboot for the NanoPi NEO2
The NanoPi NEO2 is a small Allwinner H5 based board available with
different DRAM configurations.
This board is very similar to the NanoPi NEO PLUS2

Signed-off-by: Jasper Scholte <NightNL@outlook.com>
2018-09-22 21:20:55 +02:00
Hartmut Knaack
d3a492c72f kernel: add Si7020 relative humidity/temperature sensor driver
Add support for the Silicon Labs Si7020 family of relative humidity and
temperature sensors using the I2C bus.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
2018-09-22 21:20:55 +02:00
Hartmut Knaack
265dcb05ea kernel: add TSL4531 ambient light sensor driver
Add support for the TAOS TSL4531x family of ambient light sensors using
the I2C bus.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
2018-09-22 21:20:55 +02:00
Magnus Kroken
7849f74117 mbedtls: update to 2.13.0
* Fixed a security issue in the X.509 module which could lead to a buffer overread during certificate extensions parsing.
* Several bugfixes.
* Improvements for better support for DTLS on low-bandwidth, high latency networks with high packet loss.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-09-22 19:26:25 +02:00
Felix Fietkau
a32a70f4f2 ath9k: add back support for using tx99 with active monitor interfaces
Fixes controlling bitrate

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-22 18:41:38 +02:00
Felix Fietkau
7decdf923a mac80211: fix tx queue allocation for active monitor interfaces
Fixes a crash with drivers like ath9k

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-22 18:41:36 +02:00
Felix Fietkau
a6beca1f56 mt76: fix tx power issue for mt76x2
6e1898d mt76x2: fix tx power configuration for VHT mcs 9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-22 12:56:18 +02:00
Luiz Angelo Daros de Luca
38a88ade14 elfutils: bump to 0.174
- Simplified musl patch with error.h concentrated into system.h

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-09-21 21:32:12 +02:00
Kevin Darbyshire-Bryant
6c4cbe94bd dnsmasq: Change behavior when RD bit unset in queries.
Backport upstream commit

Change anti cache-snooping behaviour with queries with the
recursion-desired bit unset. Instead to returning SERVFAIL, we
now always forward, and never answer from the cache. This
allows "dig +trace" command to work.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-09-21 09:59:03 +01:00
Jonathan Lancett
95b3f8ec8d mwlwifi: driver version to 10.3.8.0-20180920
Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com>
[minor tweak to commit title]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-09-20 21:03:48 +01:00
Felix Fietkau
ccab68f2d3 ath9k: fix unloading the module
Registering a GPIO chip with the ath9k device as parent prevents unload,
because the gpiochip core increases the module use count.
Unfortunately, the only way to avoid this at the moment seems to be to
register the GPIO chip without a parent device

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-20 10:08:17 +02:00
Rosen Penev
5efd080e20 mdadm: Install /etc/config file as 600
/etc/config/mdadm is only used by the init script which is ran as root.
There is no need for it to be readable by anything else.

Added PKG_CPE_ID for proper CVE tracking.

Small reorganization for consistency between Makefiles.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:42:13 +01:00
Rosen Penev
4ad87744fa fstools: Install mount.hotplug and 10-fstab.defaults as 600
Both of these are used by programs that run as root and nothing else.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:41:28 +01:00
Rosen Penev
873801a671 usbmode: Update modeswitch data to 20170806
Changed hotplug file to 600 as it is only read by procd, which runs as
root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:41:28 +01:00
Rosen Penev
39d8b2cf79 trelay: Install hotplug and config files as 600
The hotplug file is ran by procd, which runs as root. The config file is
used by the init script, which also runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:41:28 +01:00
Rosen Penev
7651e254d5 dropbear: Install /etc/config as 600
/etc/config/dropbear is used by the init script which only runs as root.

Small whitespace change.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:41:28 +01:00
Rosen Penev
add4871582 lldpd: Install /etc/config file as 600
/etc/config/lldpd is only used by the init script, which only runs as root

Adjusted homepage and download URLs to use HTTPS.

-std=c99 is useful for GCC versions less than 6. Current OpenWrt uses 7.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:41:28 +01:00
Hans Dedecker
6cd41ca673 netifd: update to latest git HEAD
23941d7 system-linux: enable by default ignore encaplimit for ip6 tunnels

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-19 10:09:25 +02:00
Hans Dedecker
d9691b66e2 map: drop default encaplimit value
Setting encaplimit to a numerical value results into the value being
included as tunnel encapsulation limit in the destination option header
for tunneled packets.
Several users have reported interop issues as not all ISPs support the
destination option header containing the tunnel encapsulation limit
resulting into broken map connectivity.
Therefore drop the default encaplimit value for map tunnels so
no destination option header is included by default.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-19 09:42:45 +02:00
Hans Dedecker
1241707b40 ds-lite: drop default encaplimit value
Setting encaplimit to a numerical value results into the value being
included as tunnel encapsulation limit in the destination option header
for tunneled packets.
Several users have reported interop issues as not all ISPs support the
destination option header containing the tunnel encapsulation limit
resulting into broken ds-lite connectivity.
Therefore drop the default encaplimit value for ds-lite tunnels so
no destination option header is included by default.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-19 09:42:28 +02:00
Jason A. Donenfeld
f07a94da50 wireguard: bump to 0.0.20180918
* blake2s-x86_64: fix whitespace errors
* crypto: do not use compound literals in selftests
* crypto: make sure UML is properly disabled
* kconfig: make NEON depend on CPU_V7
* poly1305: rename finish to final
* chacha20: add constant for words in block
* curve25519-x86_64: remove useless define
* poly1305: precompute 5*r in init instead of blocks
* chacha20-arm: swap scalar and neon functions
* simd: add __must_check annotation
* poly1305: do not require simd context for arch
* chacha20-x86_64: cascade down implementations
* crypto: pass simd by reference
* chacha20-x86_64: don't activate simd for small blocks
* poly1305-x86_64: don't activate simd for small blocks
* crypto: do not use -include trick
* crypto: turn Zinc into individual modules
* chacha20poly1305: relax simd between sg chunks
* chacha20-x86_64: more limited cascade
* crypto: allow for disabling simd in zinc modules
* poly1305-x86_64: show full struct for state
* chacha20-x86_64: use correct cut off for avx512-vl
* curve25519-arm: only compile if symbols will be used
* chacha20poly1305: add __init to selftest helper functions
* chacha20: add independent self test

Tons of improvements all around the board to our cryptography library,
including some performance boosts with how we handle SIMD for small packets.

* send/receive: reduce number of sg entries

This quells a powerpc stack usage warning.

* global: remove non-essential inline annotations

We now allow the compiler to determine whether or not to inline certain
functions, while still manually choosing so for a few performance-critical
sections.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2018-09-19 08:30:13 +01:00
Kevin Darbyshire-Bryant
687168ccd9 dnsmasq: Handle memory allocation failure in make_non_terminals()
Backport upstream commit:

ea6cc33 Handle memory allocation failure in make_non_terminals()

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-09-19 07:43:02 +01:00
Mike McCormack
e8cbfedc72 ucert: work around short read
usign occasionally writes 16 characters then exits without writing a LF,
leaving ucert hanging waiting for more input.  Accept 16 characters
or more rather than 17 to work around the short read.

Signed-off-by: Mike McCormack <mike@atratus.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-09-18 13:51:09 +02:00
Daniel Golle
e51aa699f7 uqmi: pass-through ipXtable to child interfaces
Allow setting specific routing tables via the ip4table and ip6table
options also when ${ifname}_4 and ${ifname}_6 child interfaces are
being created.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-09-15 19:18:42 +02:00
Kevin Darbyshire-Bryant
033f02b9b5 iproute2: q_cake: Also print nonat, nowash and no-ack-filter keywords
Pull in latest upstream tweaks:
Similar to the previous patch for no-split-gso, the negative keywords for
'nat', 'wash' and 'ack-filter' were not printed either. Add those as well.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-09-15 08:46:32 +01:00
Hannu Nyman
4a3298c124 busybox: update to 1.29.3
Update busybox to 1.29.3, minor bugfix release

https://git.busybox.net/busybox/log/?h=1_29_3

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-09-15 08:57:14 +02:00
Rosy Song
918ec4d549 odhcpd: enable ipv6 server mode only when it is supported
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-09-12 21:47:33 +02:00
Kevin Darbyshire-Bryant
8cac857289 iproute2: q_cake: Add printing of no-split-gso option
When the GSO splitting was turned into dual split-gso/no-split-gso options,
the printing of the latter was left out. Add that, so output is consistent
with the options passed

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-09-12 09:13:44 +01:00
Rafał Miłecki
b3d441c5f7 mac80211: brcmfmac: backport CYW89342 support & fixes from 4.20
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-09-12 08:40:24 +02:00
Kevin Darbyshire-Bryant
66fd41ba79 kmod-sched-cake: fix 6in4/gso performance issue
Bump to latest upstream cake:

Add workaround for wrong skb->mac_len values after splitting GSO

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-09-12 05:34:44 +01:00
Florian Fainelli
4fca0e8896 netifd: update to latest HEAD
0059335c5b60 CMakeList: Check that compiler supports -Wimplicit-fallthrough

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-09-11 17:19:51 -07:00
Jason A. Donenfeld
a54f492d0c wireguard: bump to 0.0.20180910
* curve25519: arm: do not modify sp directly
* compat: support neon.h on old kernels
* compat: arch-namespace certain includes
* compat: move simd.h from crypto to compat since it's going upstream

This fixes a decent amount of compat breakage and thumb2-mode breakage
introduced by our move to Zinc.

* crypto: use CRYPTOGAMS license

Rather than using code from OpenSSL, use code directly from AndyP.

* poly1305: rewrite self tests from scratch
* poly1305: switch to donna

This makes our C Poly1305 implementation a bit more intensely tested and also
faster, especially on 64-bit systems. It also sets the stage for moving to a
HACL* implementation when that's ready.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2018-09-11 11:34:23 +02:00
Andy Walsh
4549ab46a8 base-files: /etc/services: add missing 'rpcbind' alias
* add missing 'rpcbind' alias to /etc/services

Allows rpcbind to open its 111 port and be reachable via lan, this is the default behaviour.

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
2018-09-10 10:44:03 +02:00
Eneas U de Queiroz
0317fc3658 libpcap: patch to add limits.h to pcap-usb-linux.c
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This is an upstream-applied patch that fixes 'PATH_MAX' and 'NAME_MAX'
undeclared when compiling on musl with CONFIG_PCAP_HAS_USB.

[aafa351] pcap-usb-linux.c: add missing limits.h for musl systems.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-09-10 09:15:26 +02:00
Rosen Penev
a9aa25c8b6 usbutils: Update usb.ids to 0.315
Referencing the version instead of revision should fix uscan.

Tested on Turria Omnia.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-10 09:10:20 +02:00
Rafał Miłecki
ffa80bf5a7 mac80211: add iw command wrapper with error logging
Currently it's close to impossible to tell what part of mac80211 setup
went wrong. Errors logged into system log look like this:
radio0 (6155): command failed: No error information (-524)
radio0 (6155): command failed: Not supported (-95)
radio0 (6155): command failed: I/O error (-5)
radio0 (6155): command failed: Too many open files in system (-23)

With this commit change it's getting clear:
command failed: No error information (-524)
Failed command: iw dev wlan0 del
command failed: Not supported (-95)
Failed command: iw phy phy0 set antenna_gain 0
command failed: I/O error (-5)
Failed command: iw phy phy0 set distance 0
command failed: Too many open files in system (-23)
Failed command: iw phy phy0 interface add wlan0 type __ap

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-09-10 09:03:09 +02:00
Rosen Penev
f78e07ad2a hostapd: Fix compile with OpenSSL 1.1.0 + no deprecated APIs
Patch was accepted upsteam:

https://w1.fi/cgit/hostap/commit/?id=373c796948599a509bad71695b5b72eef003f661

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-10 09:01:37 +02:00
Luis Araneda
e2a4d14aaa uboot-zynq: use a file to modify the default environment
Follow the strategy of other targets and create a
default environment file, uEnv.txt, to configure the
behavior of U-Boot.
For now, use it to pass bootargs to the kernel

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-09-10 08:54:41 +02:00
Luis Araneda
306a60fcfe uboot-zynq: copy U-Boot images to STAGING_DIR
Create a directory inside STAGING_DIR and copy U-Boot
output images, so they can be used later when creating the
sdcard image

Additionally, like others targets, override the default
install method to avoid copying the images to bin directory

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-09-10 08:54:25 +02:00
Luis Araneda
e62df3dd8b uboot-zynq: automatically select the appropriate variant
Select the U-Boot variant automatically based on the
current selected device, and hide the package from
menuconfig

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-09-10 08:54:00 +02:00
Luis Araneda
5d2b702590 uboot-zynq: remove ZC706 board
The board was added when creating the target, but the
corresponding device was never defined inside the target

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-09-10 08:53:28 +02:00
Hans Dedecker
43d4b8e89e dnsmasq: bump to dnsmasq 2.80test6
Refresh patches

Changes since latest bump:

af3bd07 Man page typo.
d682099 Picky changes to 47b45b2967c931fed3c89a2e6a8df9f9183a5789
47b45b2 Fix lengths of interface names
2b38e38 Minor improvements in lease-tools
282eab7 Mark die function as never returning
c346f61 Handle ANY queries in context of da8b6517decdac593e7ce24bde2824dd841725c8
03212e5 Manpage typo.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-09-09 22:02:45 +02:00
Daniel Engberg
9cfa5f2cec curl: Update to 7.61.1
Update curl to 7.61.1

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-09-09 21:38:10 +02:00
pacien
ef01c1d308 odhcp6c: add client fqdn and reconfigure options
Allowing DHCPV6_CLIENT_FQDN and DHCPV6_ACCEPT_RECONFIGURE to be turned off.
Defaulting to false, former behavior remains unchanged.

Signed-off-by: pacien <pacien.trangirard@pacien.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-09-08 21:36:30 +02:00
Koen Vandeputte
2253524023 gdb: bump to 8.2
*** Changes in GDB 8.2

 Support for the following target has been added:

    RiscV ELF (riscv*-*-elf)

 Support for following targets and native configurations has been removed:

    m88k running OpenBSD (m88*-*-openbsd*)
    SH-5/SH64 ELF (sh64-*-elf*)
    SH-5/SH64 (sh*)
    SH-5/SH64 running GNU/Linux (sh*-*-linux*)
    SH-5/SH64 running OpenBSD (sh*-*-openbsd*)

 Various Python API enhancements
 Aarch64/Linux enhancements:

    SVE support.
    Hardware watchpoints improvements for entities stored at unaligned addresses.
        New "c" response to disable the pager for the rest of the current command.
        C expressions can now use _Alignof, and C++ expressions can now use alignof.
        Improved flexibility for loading symbol files.
        The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems.
        A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X).

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-07 17:21:24 +02:00
Koen Vandeputte
77024a9d95 mac80211: backport upstream fixes
Backport most significant upstream fixes (excl. hwsim fixes)
Refreshed all patches.

Contains important fixes for CSA (Channel Switch Announcement)
and A-MSDU frames.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-09-07 17:21:24 +02:00