Commit graph

33934 commits

Author SHA1 Message Date
Luka Perkov
cdfeab0931 imx6: drop 4.1 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48300
2016-01-18 06:43:50 +00:00
Luka Perkov
c4de2dfd2d imx6: drop 4.3 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48299
2016-01-18 06:43:48 +00:00
Luka Perkov
85bdde7cf2 imx6: move to 4.4 kernel
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48298
2016-01-18 06:40:16 +00:00
Felix Fietkau
93a2b8a6c4 mpc85xx: update to linux 4.4, remove unnecessary patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48297
2016-01-17 21:05:19 +00:00
Felix Fietkau
495935a3b8 iproute2: remove odd conffiles generation
This was generating a conffiles list that included the binary
and CONTROL/ files.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48296
2016-01-17 20:41:09 +00:00
Felix Fietkau
d64465556c lantiq: Remove incorrect PCIe compatible strings
Re-defining the compatible property is not required since the correct
value is inherited from vr9.dtsi.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48295
2016-01-17 19:56:16 +00:00
Felix Fietkau
720f599c9a lantiq: Remove the old SPI driver patch
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48294
2016-01-17 19:56:10 +00:00
Felix Fietkau
04ad02d132 lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
Felix Fietkau
5985c56ec6 lantiq: Add a rewritten version of the SPI driver
The new driver provides a few improvements over the old one:
- Separate compatible strings per SoC type (this allows removing some
  hardcoded of_device_is_compatible() checks)
- It does not rely upon spi-bitbang anymore
- chip-selects are numbered as in the datasheet (= starting at 1 instead
  of 0)

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48292
2016-01-17 19:55:55 +00:00
Felix Fietkau
af857db692 lantiq: Disable CONFIG_SPI_GPIO
All devices are now using the HW SPI driver, so this is not necessary
anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48291
2016-01-17 19:55:48 +00:00
Felix Fietkau
d5c5928d6b lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500B
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48290
2016-01-17 19:55:42 +00:00
Felix Fietkau
d8b74320bd lantiq: Enable SPI for the EASY80920 board again
Also switch to the SPI definition provided by vr9.dtsi

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48289
2016-01-17 19:55:37 +00:00
Felix Fietkau
be8f9ad6f4 lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48288
2016-01-17 19:55:31 +00:00
Felix Fietkau
9d558fb48e lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsi
This removes the duplicate SPI register definition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48287
2016-01-17 19:55:25 +00:00
Felix Fietkau
a5c177943b lantiq: Add the SPI node to ar9.dtsi and vr9.dtsi
This allows devices to use SPI without having to re-define (and thus
duplicating) the whole SPI node.
By default SPI is disabled (as before) because only few devices need it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48286
2016-01-17 19:55:17 +00:00
Felix Fietkau
3f8a426056 lantiq: Configure the PCIe reset GPIO using OF
After the latest pinctrl backports there are only 50 (instead of 56 as
before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now
462, before it was 456). This means that any hardcoded GPIOs have to be
adjusted.
This broke the PCIe driver (which seems to be the only driver which uses
hardcoded GPIO numbers), it only reports:
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	pcie_rc_initialize link up failed!!!!!

To prevent more of these issues in the future we remove the hardcoded
PCIe reset GPIO definition and simply pass it via device-tree (like the
PCI driver does).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48285
2016-01-17 19:55:10 +00:00
Felix Fietkau
1204a1b1e5 lantiq: Use the new pinctrl compatible strings
These were introduced in upstream commit
be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree
bindings" and finally allow us to use the individual pins within our dts
(for example spi_clk, etc.).
Please note that this changes the number of GPIOs which are available for
some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56
pins were exposed. This means that all places which are using hardcoded
GPIO numbers (which are not passed via device-tree) need to be adjusted
(because the first GPIO number is now 462, instead of 456).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48284
2016-01-17 19:55:04 +00:00
Felix Fietkau
ee03fc430d lantiq: Backport upstream pinctrl-xway patches from 4.5
Upstream commit be14811c03cf2 "pinctrl/lantiq: introduce new dedicated
devicetree bindings" allows us to use each pin in the pinmux. This is
useful for example in the "spi" group which contains some pins which
are inputs, and some which are outputs.
These can only be used once the new compatible strings for the pinctrl
node are used.
Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix"
(which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were
replaced with their upstream variants which are also in 4.5.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48283
2016-01-17 19:54:59 +00:00
Felix Fietkau
95699dd312 lantiq: ltq-deu: Make the DEU driver compatible with linux 4.2 and newer
Upstream linux 4.2 commit 84be456f883c4685680fba8e5154b5f72e92957e
"remove <asm/scatterlist.h>" requires us to include linux/scatterlist.h
instead. This also works with older kernels (at least 4.1, thanks to
Hauke Mehrtens for testing).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48282
2016-01-17 19:23:14 +00:00
Jo-Philipp Wich
740a2ee163 base-files: Fix sysupgrade overlay saving
A previous change to sysupgrade moved the overlay files into upper/
The -c switch generates a list of files to backup, but the sed
calls did not take this into consideration.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48281
2016-01-17 18:24:30 +00:00
Jo-Philipp Wich
5cf88bb032 netifd: fix PKG_VERSION (#21630)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48280
2016-01-17 17:15:01 +00:00
Gabor Juhos
55b0e261a4 ar71xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.

The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.

Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.

Fix the code to reserve stack space for the registers to avoid this
error.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 48279
2016-01-17 15:29:03 +00:00
Felix Fietkau
c3b01ead44 uclient: update to the latest version, adds many fixes/features
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48278
2016-01-17 12:41:06 +00:00
Felix Fietkau
33d1b2e0f5 kernel: add missing kernel config symbol for crypto-rng (fixes #21596)
Signed-off-by: Lucian Cristian <luci@createc.ro>

SVN-Revision: 48277
2016-01-17 11:17:06 +00:00
Felix Fietkau
b7aab03486 ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4
Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash.

Credit to @Tuochenlyu on GitHub.

Signed-off-by: Chris Marchesi <chrism@vancluevertech.com>

SVN-Revision: 48276
2016-01-17 11:16:56 +00:00
Felix Fietkau
271a348cda mpc85xx: Add PTP node for TL-WD4900 in device tree
PTP requires at least one timer to be 1PPS so describe it.
For testing, load kernel module gianfar_ptp and use ptp4l
from linuxptp.

Copied from FSL P1010RDB reference design.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 48275
2016-01-17 11:16:52 +00:00
Felix Fietkau
e2e8cb8347 network: add virtual tunnel interface (VTI) support
This adds support for configuring VTI interfaces within /etc/config/network.
VTI interfaces are used to create IPsec tunnel interfaces. These interfaces
may be used for routing and other purposes.

Example config:
config interface 'vti1'
	option proto 'vti'
	option mtu '1500'
	option tunlink 'wan'
	option peeraddr '192.168.5.16'
	option zone 'VPN'
	option ikey 2
	option okey 2

config interface 'vti1_static'
	option proto 'static'
	option ifname '@vti1'
	option ipaddr '192.168.7.2/24'

The options ikey and okey correspond to the fwmark value of a ipsec policy.
The may be null if you do not want fwmarks.
Also peeraddr may be 0.0.0 if you want all ESP packets go through the
interface.
Example strongswan config:
conn vti
	left=%any
	leftcert=peer2.test.der
	leftid=@peer2.test
	right=192.168.5.16
	rightid=@peer3.test
	leftsubnet=0.0.0.0/0
	rightsubnet=0.0.0.0/0
	mark=2
	auto=route

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 48274
2016-01-17 11:06:02 +00:00
Felix Fietkau
eb1ac66ce7 netifd: update to the latest version, adds VTI support and a policy routing fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48273
2016-01-17 11:05:53 +00:00
Felix Fietkau
0200735bda kernel: add usb-net-sr9700 package
Add support for
CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

SVN-Revision: 48272
2016-01-17 11:03:41 +00:00
Felix Fietkau
20a67881f4 ca-certificates: update to version 20160104
- update to latest version 20160104
- remove cpu dependency (PKGARCH:=all)
- set myself as package maintainer

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 48271
2016-01-17 11:03:36 +00:00
Felix Fietkau
883b5b8191 build: add @APACHE download facility
The Apache Software Foundation offers diverse download mirros.

For packaging Apache software a new alias @APACHE is defined.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

SVN-Revision: 48270
2016-01-17 10:47:32 +00:00
Felix Fietkau
deb4c31da4 lantiq: Fixed brnImage signature for the VGV7510KW22BRN images
The old signature only worked because brnboot ignores the leading "5" in
the signature. We can see the correct signature when flashing a brnImage
via recovery web-interface, in this case brnboot reports:
	[CGI-Signature Check] buf:[BRNDA6431], sigInFlash:[BRNDA6431]

Thanks to Mathias Kresin for reporting this.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48269
2016-01-17 10:47:10 +00:00
Felix Fietkau
f8d2ec6e9d ar8327: add IGMP Snooping support
This add support for IGMP Snooping on atheros switches (disabled by default),
which avoids flooding the network with multicast data.

Tested on TL-WDR4300: disabling IGMP Snooping results in multicast flooding
on each specific port, enabling it back again prevents each port from
receiving all multicast packets.

Partially based on: http://patchwork.ozlabs.org/patch/418122/

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48268
2016-01-17 10:42:46 +00:00
Felix Fietkau
1f826e8992 Support LibreSSL as provider of openssl
The build scripts check for openssl by grepping the string "OpenSSL" in
the output of openssl version command. LibreSSL fails this test as it
outputs something like "LibreSSL 2.2.4". This patch fix the
prereq-bulid.mk file so that it accepts LibreSSL as openssl provider as
well.

Signed-off-by: Marek Behun <kabel@blackhole.sk>

SVN-Revision: 48267
2016-01-17 10:42:32 +00:00
Felix Fietkau
4224b52c3a brcm2708: add linux 4.4 support
- random-bcm2708 and spi-bcm2708 have been removed.
- sound-soc-bcm2708-i2s has been upstreamed as sound-soc-bcm2835-i2s.

Let's keep linux 4.1 for a while, since linux 4.4 appears to have some issues
with multicast traffic on RPi ethernet:
https://gist.github.com/Noltari/5b1cfdecce5ed4bc08fd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48266
2016-01-17 10:42:23 +00:00
Felix Fietkau
cad399c87b uml: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48265
2016-01-17 10:41:52 +00:00
Felix Fietkau
7c0260117f lantiq: Switch to the generic mtdsplit parser implementations
This removes the arch-specific mtdsplit parsers and enables the generic
implementations for brnImage, EVA and TP-Link instead.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48264
2016-01-17 10:41:46 +00:00
Felix Fietkau
7703e14bc4 kernel: mtdsplit_squashfs: Align with the erase-block size
On most image types the rootfs ends at an erase-block. However, at least
with brnImages this is not the case: while the partitions are aligned
with the erase-block size there is a 12 byte footer at the end of the
partition which must not be touched by any filesystem. This lead to a
rootfs_data partition which was not aligned properly (and thus ended up
being readonly):
	0x000000480000-0x00000085a800 : "rootfs_data" (128 KiB EB)

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48263
2016-01-17 10:41:30 +00:00
Felix Fietkau
651083bbd9 kernel: mtdsplit: add support for EVA images
This allows splitting EVA images (usually found in fritz devices). The
firmware will be split into a kernel and a separate rootfs partition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48262
2016-01-17 10:41:08 +00:00
Felix Fietkau
bdd2772f1d kernel: mtdsplit: add support for brnImages
This adds brnImage (used with the brnboot bootloader) firmware parsing
support. brnboot verifies the integrity of the firmware stored on the
"Code Image" partitions by looking at the 12 byte footer at the very end
of the partition. This footer contains the checksum of the original
brnImage (kernel + rootfs/squashfs) and must not be touched (by our JFFS2
rootfs_data - otherwise the image will not be bootable anymore).

Big thanks to Mathias Kresin for analyzing the brnImage structure and
finding out the information how to keep images valid even when adding a
nested rootfs_data partition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48261
2016-01-17 10:40:51 +00:00
Felix Fietkau
3348279eca kernel: disable bogus DEVTMPFS config overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48260
2016-01-17 10:40:36 +00:00
Felix Fietkau
526f470c5f download.pl: fix openssl sha256 digest output
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48259
2016-01-16 10:24:15 +00:00
Felix Fietkau
b075688953 ustream-ssl: fix copy&paste mistake in mbedtls variant title
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48258
2016-01-16 09:14:03 +00:00
Felix Fietkau
b0b0c319f9 polarssl: update to 1.3.16, fixes intermediate certificate validation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48257
2016-01-16 00:20:05 +00:00
Felix Fietkau
d9494cdf6d ustream-ssl: update to the latest version, adds mbedtls variant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48256
2016-01-16 00:20:01 +00:00
Felix Fietkau
5bd5c3282b libubox: update to the latest version, adds lua/ustream fixes and extends usock
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48255
2016-01-16 00:19:54 +00:00
Felix Fietkau
6665bbb1a0 mbedtls: update to version 2.2.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48254
2016-01-16 00:19:47 +00:00
Felix Fietkau
eaa4eba10a scripts/download.pl: add SHA-256 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48253
2016-01-16 00:19:41 +00:00
Zoltan Herpai
39f385d0d6 packages: bump uboot-sunxi to 2016.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48252
2016-01-15 20:27:32 +00:00
Felix Fietkau
b2e374346b mwlwifi: fix build with latest mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48251
2016-01-15 16:58:00 +00:00