Commit graph

33019 commits

Author SHA1 Message Date
Felix Fietkau
df190f4522 ath10k: remove API v2 firmware, it is no longer needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47009
2015-09-21 17:18:43 +00:00
Zoltan Herpai
a1f4164631 packages: uboot-mxs: place binaries in the designated path
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 47008
2015-09-18 19:29:23 +00:00
Zoltan Herpai
c927366d05 packages: uboot-mxs: fix I2SE Duckbill variant
The current patch to add Duckbill support is wrong and does not
even compile. So replace this patch with a working one.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 47007
2015-09-18 19:24:38 +00:00
Felix Fietkau
c2babe7cb2 iw: restore limited event monitor functionality (#20546)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47006
2015-09-18 13:40:03 +00:00
Felix Fietkau
c429250ee4 arm64: switch to Kernel 4.1
- fix Kernel dts subdir location
- enable virtio networking
  we are using -M virt which supports virtio devices

changes in symbols due to make kernel_oldconfig:

- CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y : removed
fix security: upstream id: d1fd836dcf00d2028c700c7e44d2c23404062c90

- CONFIG_ARM64_CPU_SUSPEND: removed
commit id: af3cfdbf56b91785650f54e7c9a899d814b4b9fb

- CONFIG_ARM64_PGTABLE_LEVELS=3 : renamed PGTABLE_LEVELS
commit id: 9f25e6ad58e1fb3b4d441e4c55635c4598a6fa94

- CONFIG_GENERIC_CLOCKEVENTS_BUILD=y : removed upstream
commit id: 9f083b74df3a7eaa100b456f2dc195512daf728e

-# CONFIG_PREEMPT_RCU: unnecessary

unknown remove reasons:
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_XEN is not set

tested and boot, networking work with qemu

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 47005
2015-09-18 13:39:55 +00:00
Felix Fietkau
69391f49b5 mac80211: add missing dependency for the hermes driver (#20543)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46998
2015-09-18 09:05:11 +00:00
Felix Fietkau
708c58c1a7 kernel: fix dependencies of the sock_diag debloat patch (#20544)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46997
2015-09-18 09:05:01 +00:00
Felix Fietkau
6c018c2f5e kernel: solos-pci: Increase headroom on received packets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46993
2015-09-17 15:38:58 +00:00
Felix Fietkau
312908ff4b kernel: ipv6: ip6_fragment: fix headroom tests and skb leak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46992
2015-09-17 15:38:46 +00:00
Jo-Philipp Wich
f2a19350fd firewall: depend on kmod-ipt-conntrack (#20542)
Our ruleset requires kernel support for conntrack state matching, therfore
depend on the require kmod. Fixes #20542.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46990
2015-09-17 15:31:45 +00:00
Jo-Philipp Wich
1ca571b6c2 tools/mtd-utils: avoid linking libm statically
Rework static linker flags to not link libm statically, this should fix the
build on CentOS where libm.a is not provided by the libc devel package.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46989
2015-09-17 13:07:48 +00:00
Felix Fietkau
d6408aa9b4 x86/geode: enable DMI and Geos support (fixes #20512)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 46986
2015-09-17 10:15:52 +00:00
Felix Fietkau
ef447c9a5f x86: fix Geode LX timekeeping (#20531)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46985
2015-09-17 10:15:45 +00:00
Felix Fietkau
45b52d4581 kernel: remove lantiq specific ATM API hacks and their kernel space users (fixes #20523)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46984
2015-09-17 09:45:34 +00:00
John Crispin
9412c4e66c kernel: unbreak atm ABI for 4.0 and 4.1
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46983
2015-09-16 12:40:40 +00:00
Felix Fietkau
4d01d6ccb1 build: do not overwrite already existing host commands
This prevents a later prereq check from overwriting the installed tar
binary.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46982
2015-09-16 12:38:16 +00:00
John Crispin
e11479771d kernel: properly guard the lantiq atm abi hack with an ifdef
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46981
2015-09-16 12:08:05 +00:00
John Crispin
5bf8dd5e5e opkg: Extend 'opkg list' command to optionally display package size
'opkg list' command only displays the available packages' name, version and
description. It would be useful to also see the approximate size of the
available package.

This patch extends "opkg list" command with "--size" to optionally show also
the *.ipk size.
* Default behaviour is to list the available packages as earlier:
  "name - version - description"
* with "--size" the output of is "name - version - size - description".

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 46980
2015-09-16 09:37:39 +00:00
John Crispin
cb632b2d3b mac80211: rename iwlagn to iwlwifi
follow upstream module rename
commit 3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46979
2015-09-16 09:37:27 +00:00
John Crispin
5650c28037 mac80211: cleanup sort
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46978
2015-09-16 09:37:18 +00:00
John Crispin
0d41307073 mac80211: cleanup remove net prefixes
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46977
2015-09-16 09:37:11 +00:00
Jo-Philipp Wich
90daa0d361 prereq-build: test for static zlib availability
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46976
2015-09-16 08:44:53 +00:00
Jo-Philipp Wich
33b3594332 base-files: refactor default_postinst()
- Simplify user spec parsing code
 - Alias IPKG_INSTROOT to shorten code
 - Quote variables where appropriate
 - Remove a useless-use-of-cat instance
 - Suppress errors in case control or list files are missing

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46975
2015-09-16 08:43:58 +00:00
John Crispin
94295b80ff kernel 3.18/kernel 4.0/kernel 4.1: add missing symbol
deactivate NET_SCTPPROBE just like NET_TCPPROBE

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46974
2015-09-16 08:33:25 +00:00
John Crispin
74bbc08651 x86: add missing symbol
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46973
2015-09-16 08:33:18 +00:00
John Crispin
ac75fc8d98 ar71xx: add support for ap152 reference board
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46972
2015-09-16 08:33:14 +00:00
John Crispin
f6607a4bec ath79: dev-eth: fix QCA9561 set phy interface mode and mask
QCA9563 and QCA9561 are two series of Qualcomm SoC Dragonfly. The only different
is QCA9563 w/o internal switch. It has one GMAC with SGMII interface. But they
have the same device ID(0x1150). So they share the same codes.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46971
2015-09-16 08:33:04 +00:00
John Crispin
fa09d76521 ar71xx: uci-defaults: fix ap143 to appropriate group
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46970
2015-09-16 08:32:56 +00:00
John Crispin
251b58a0a5 lldpd: add extra respawn params
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>

SVN-Revision: 46969
2015-09-16 08:32:41 +00:00
John Crispin
9885e32521 lldpd: conversion of init script to procd format
And add respawn param (the main reason for this conversion).

Signed-off-by: Alexandru Ardelean <aa@ocedo.com>

SVN-Revision: 46968
2015-09-16 08:32:33 +00:00
John Crispin
fc19ec21e4 lldpd: move /var/run creation + chmod earlier
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>

SVN-Revision: 46967
2015-09-16 08:32:27 +00:00
John Crispin
5007f488bb lldpd: remove obsolete/unsupported lldpctl call
This call is no longer supported.
Maybe a come-back for it would be to use a config /etc/lldpd.conf
or /etc/lldpd.d/<some-file>.conf

Signed-off-by: Alexandru Ardelean <aa@ocedo.com>

SVN-Revision: 46966
2015-09-16 08:32:18 +00:00
John Crispin
ef2f50829d base-files: add /etc/profile.d support
OpenWrt should support an optional /etc/profile.d directory like
most other Linux distributions. This allows packages to install
their own scripts into /etc/profile.d/ directory.

The file suffix should make clear, that these scripts
are (sourced) shell-snippets. If the user needs e.g. php or lua,
one must make sure that the interpreter is called.
The reverse failsafe test makes sure, that the effective returncode is 0.

A typcal usecase is the inclusion of private helpers,
special variables or aliases, which at the moment needs
patching the sourcecode and is not well maintainable.
Now the builder can simply add there files.

v1 initial work of Hendrik Lüth <hendrik@linux-nerds.de>
v2 changes regarding RFC (e.g. thomas.langer@lantiq.com)
v3 changes regarding RFC (e.g. mschiffer@universe-factory.net)
v4 keep it simple and mimic OpenWrt style

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 46965
2015-09-16 08:32:13 +00:00
John Crispin
f461ffbaad kernel: unbreak the atm abi
the lantiq dsl hack to struct atm_trafprm broke the ABI fix this by moving
the variables to the end of the struct

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46964
2015-09-16 08:32:01 +00:00
John Crispin
f453508b3e ramips: Fix pinmux functions for MT7621
The pinctrl-rt2880 code doesn't support multiple functions with the same
name. This will result in a incorrect pinmux configuration.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46963
2015-09-16 08:31:52 +00:00
John Crispin
99e8fd9e84 procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46962
2015-09-16 08:31:45 +00:00
John Crispin
1297679f4b ar71xx: Add UBNT airGateway Pro support
This patch adds kernel and userspace support for the Ubiquiti Networks airGateway Pro.

Signed-off-by: Matthew Reeve <mreeve at tenxnetworks.com>

SVN-Revision: 46961
2015-09-16 08:31:40 +00:00
John Crispin
08e0621f4e fstools: update to latest git revision
jffs2reset was following symlinks making it delete mounts for example.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46960
2015-09-16 08:31:24 +00:00
John Crispin
3a149a2910 ramips: add mt7621/3/8 support to the I2C driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46959
2015-09-16 08:31:15 +00:00
John Crispin
e6a9d5edf2 ramips: fix reported vendor name
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46958
2015-09-16 08:31:10 +00:00
John Crispin
86a1e46b63 ramips: add proper mt7688 detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46957
2015-09-16 08:31:00 +00:00
John Crispin
85d5b9984d ramips: add speed and mode settings to spi-mt7621
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46956
2015-09-16 08:30:43 +00:00
John Crispin
38c28154bd ramips: add get_direction() callback and irq support to gpio-mt7621
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46955
2015-09-16 08:30:17 +00:00
John Crispin
23d79b60ce ramips: more m7628 pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46954
2015-09-16 08:30:06 +00:00
John Crispin
9473837653 ramips: add mt7628 pwm driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46953
2015-09-16 08:29:55 +00:00
John Crispin
9dfe1f6fbe ramips: make pinctrl work on newer socs
newer socs have 2 mux registers

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46952
2015-09-16 08:29:45 +00:00
John Crispin
710520d5c7 ramips: make the mt7628 spi driver work for both cs lines
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46951
2015-09-16 08:29:40 +00:00
John Crispin
6f07b8a659 ramips: make the early_printk code detect which uart is used
only tested on mt7628

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46950
2015-09-16 08:29:31 +00:00
Felix Fietkau
3dc3275b38 mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46949
2015-09-16 07:56:47 +00:00
Felix Fietkau
5fa9ed8c10 ath9k: enable hw manual peak calibration for QCA9561
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46948
2015-09-16 07:56:41 +00:00