Commit graph

80 commits

Author SHA1 Message Date
John Crispin
8b3882224a wpa_supplicant: add more parameters
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32829
2012-07-24 23:07:15 +00:00
Jo-Philipp Wich
17f5287b0e hostapd: change wpa_supplicant.sh to pass 64 byte hex psk unquoted and remove the undocumented usepasspharse option, this makes it match the logic of the hostapd setup
SVN-Revision: 32614
2012-07-05 12:25:29 +00:00
Felix Fietkau
bcd4209323 hostapd: fix driver setting for wpa_s in IBSS/WPA-NONE
This fix is needed to correctly set the driver to use with wpa_s in case of
IBSS/WPA-NONE. The current setting is not made correctly.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 32084
2012-06-06 15:25:52 +00:00
Felix Fietkau
34ccdb348d wpa_supplicant: make key_mgmt default to NONE
SVN-Revision: 31145
2012-03-29 16:30:13 +00:00
Felix Fietkau
d5833ff3f3 wpa_supplicant: fix regressions introduced by the ibss-rsn changes
SVN-Revision: 31087
2012-03-27 13:38:08 +00:00
Felix Fietkau
d654ad2ae9 wpa_supplicant: add CONFIG_IBSS_RSN=y compilation option
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 31086
2012-03-27 13:29:51 +00:00
Felix Fietkau
1eaf4bf8fc wpa_supplicant: modify wpa_supplicant.sh in order to support IBSS-RSN/WPA-NONE
Based on patch by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 31085
2012-03-27 13:29:41 +00:00
Felix Fietkau
1a167905c6 hostapd: disable the state dump callback to save a few more kb
SVN-Revision: 30667
2012-02-21 00:27:28 +00:00
Hamish Guthrie
92d36617b6 hostapd: correctly pass 64 char hex PSK to wpa_supplicant
SVN-Revision: 30504
2012-02-13 16:07:53 +00:00
Jo-Philipp Wich
e1d199bbbc hostapd: introduce a client_cert option which is passed on to wpa_supplicant (#8876)
SVN-Revision: 29901
2012-01-24 20:54:13 +00:00
Jo-Philipp Wich
ec20b84048 hostapd: add code to prevent accidentally bridging non-wds sta mode interfaces
SVN-Revision: 28858
2011-11-08 14:22:56 +00:00
Jo-Philipp Wich
964feeb54d hostapd: introduce "wpa_pair_rekey" and "wpa_master_rekey" options, remove hardcoded wpa rekey intervals, remove hardcoded radius_acct_interim_interval as it might overrule the radius Acct-Interim-Interval attribute
SVN-Revision: 28207
2011-09-09 18:19:18 +00:00
Jo-Philipp Wich
cfc23e4c49 hostapd: introduce options to configure the logging behaviour. The config wifi-device section gains the following settings: * log_level (2) - Defines the minimum message level * log_80211 (true) - Log 802.11 events * log_8021x (true) - Log 802.1X events * log_radius (true) - Log RADIUS events * log_wpa (true) - Log WPA events * log_driver (true) - Log driver interface messages * log_iapp (true) - Log IAPP events * log_mlme (true) - Log MLME events
SVN-Revision: 28056
2011-08-20 00:13:58 +00:00
Felix Fietkau
2b5517934d wpa_supplicant: make sure that the common 802.11 code gets linked in (fixes #9299)
SVN-Revision: 26764
2011-04-26 19:16:25 +00:00
Vasilis Tsiligiannis
9d54c7aaaf hostapd: add accounting configuration to hostapd uci script
Hello

This patch add accounting configuration in hostapd.sh
It also change "server, port, key" to "auth_server, auth_port, auth_secret" but keep backward compatibility
Please patch backfire & trunk

Thanks in advance.

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 26482
2011-04-05 15:09:26 +00:00
Felix Fietkau
516440649b hostapd: add more wps config methods to the config
SVN-Revision: 26288
2011-03-25 14:01:05 +00:00
Jo-Philipp Wich
f1ac8cf285 hostapd: allow mixed TKIP/CCMP for 11n
SVN-Revision: 25543
2011-02-15 08:49:45 +00:00
Felix Fietkau
b60332deb0 hostapd: Create one control interface per virtual bssid
Previously hostapd created one control interface /var/run/hostapd-phyX
which only contained the first virtual bssid (for example wlan0). In
order to access the other virtual bssids with hostapd_cli add all
virtual bssids to /var/run/hostapd-phyX by specifying the ctrl_interface
parameter per bssid.

Previously the control interface looked like:
	/var/run/hostapd-phyX/wlan0

Now, the control interface looks like this:
	/var/run/hostapd-phyX/wlan0
	/var/run/hostapd-phyX/wlan1
	...

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24985
2011-01-14 10:52:54 +00:00
Felix Fietkau
58ed4ded0e hostapd: fix appending the iapp_interface variable to the config
Signed-off-by: Alexander Couzens <lynxis@c-base.org>

SVN-Revision: 24724
2010-12-19 11:56:49 +00:00
Felix Fietkau
7ecd1c7484 hostapd: Add CONFIG_FULL_DYNAMIC_VLAN=y to hostapd-full.config
This allows hostapd to make use of the config option
"vlan_tagged_interface" to automatically create bridge and
VLAN interfaces in a fully dynamic way.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24722
2010-12-19 11:48:38 +00:00
Felix Fietkau
d08bc913a8 hostapd: Allow rsn_preauth configuration
Hostapd can allow preauthentication for WPA2-EAP networks when
the interfaces through which preauthentication is allowed are
configured.

Add a new param "rsn_preauth=0/1" to the configuration that enables
or disables preauthentication on the according bridge interface.

Preauthentication for unbridged networks is not considered in this
patch.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24721
2010-12-19 11:48:31 +00:00
Vasilis Tsiligiannis
87cba7eb46 hostapd: Add 'identity' config option when eap_type is 'tls' on wpa_supplicant (#8164)
SVN-Revision: 23817
2010-11-03 10:39:29 +00:00
Jo-Philipp Wich
0280ac8c92 Set auth_algs in hostapd.conf, make it configurable for WEP Always set auth_algs in hostapd.conf. For WEP, auth_algs is configurable by setting the encryption parameter of a wifi-iface to contain "open" (1, open system), "shared" (2, shared key), or "mixed" (3, permits both open system and shared key.) For example, use "wep+shared" for shared key authentication. The default is default is "open" as it is more secure than "shared" (although WEP is pretty weak regardless.) For non-WEP, "open" is always used.
https://dev.openwrt.org/ticket/8120

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23655
2010-10-27 11:11:04 +00:00
Felix Fietkau
35cdc5d722 hostapd/mac80211: implement support for AP+STA
SVN-Revision: 23602
2010-10-23 23:39:54 +00:00
Vasilis Tsiligiannis
1beef305cf hostapd: Add support for 'iapp_interface' option, thanks stsp (#7719)
SVN-Revision: 22527
2010-08-08 10:46:24 +00:00
Felix Fietkau
ca4a8b1bee hostapd: add preliminary wps script support (push-button only, does not handle multi-bss yet)
SVN-Revision: 22100
2010-07-08 18:36:17 +00:00
Felix Fietkau
4c0da9863a hostapd: enable WPS for the full version of hostapd/wpa_supplicant/wpad
SVN-Revision: 22098
2010-07-08 18:36:07 +00:00
Jo-Philipp Wich
5f895af9fb hostapd: enforce CCMP WPA cipher if hwmode is 11ng or 11na
SVN-Revision: 22000
2010-06-30 21:24:30 +00:00
Jo-Philipp Wich
f391ff4ec8 hostapd: allow *ccmp+tkip and *aes+tkip as well for cipher override
SVN-Revision: 21998
2010-06-30 21:03:56 +00:00
Jo-Philipp Wich
4289fa555e hostapd: forgot the actual change in previous commit
SVN-Revision: 21821
2010-06-16 20:28:11 +00:00
Felix Fietkau
db8b1922fc hostapd: add ap isolate support for mac80211
SVN-Revision: 21179
2010-04-26 23:08:03 +00:00
Jo-Philipp Wich
38b256105d hostapd: fixup madwifi turbo modes (#7060)
SVN-Revision: 20675
2010-04-03 15:16:33 +00:00
Travis Kemen
7a00430b3e When enabling MFP, hostapd will read assoc_sa_query_max_timeout and assoc_sa_query_retry_timeout from it's config file. Make these options configurable in /etc/config/wireless. To make it clear that these options are 802.11w related, I named them ieee80211w_max_timeout and ieee80211w_retry_timeout instead.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 20397
2010-03-24 00:23:10 +00:00
Travis Kemen
22b92b3e13 Enable management frame protection in hostapd, and make it configurable in /etc/config/wireless. Since ath9k is currently the only driver that supports MFP, it will only be enabled when ath9k is enabled.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 20396
2010-03-24 00:22:19 +00:00
Travis Kemen
21f006f156 Enable management frame protection in wpa_supplicant, and make it configurable in /etc/config/wireless.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 20395
2010-03-24 00:21:28 +00:00
Travis Kemen
e74fbc183b Cleanup redundant psk handling code in wpa_supplicant.sh. (I sent this one to openwrt-devel before, but I am resending it as part of this series because the next patch will also edit wpa_supplicant.sh).
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 20394
2010-03-24 00:19:42 +00:00
Jo-Philipp Wich
90c566f557 hostapd: always strip "11" from hwmode value
SVN-Revision: 20363
2010-03-21 22:35:58 +00:00
Felix Fietkau
ad1507756b hostapd: remove the hotplug script for adding wds station interfaces to a bridge - it suffers from race conditions. instead let hostapd add the interfaces to the bridge
SVN-Revision: 20104
2010-03-09 21:16:38 +00:00
Felix Fietkau
7fdbfef92f wpa_supplicant: fix bridging settings for wds
SVN-Revision: 20088
2010-03-09 17:35:59 +00:00
Felix Fietkau
31cfd93be4 hostapd: support creating WEP networks for mac80211 (patch by Stijn Tintel), fixes #6672
SVN-Revision: 19720
2010-02-19 01:34:44 +00:00
Felix Fietkau
d692a2340c mac80211: always use wpa_supplicant for client connections (patch by Stijn Tintel)
Since client mode in mac80211is unreliable without using wpa_supplicant,
it would be better to enable wpa_supplicant by default.

With this patch, wpa_supplicant will always be used for mac80211-based
drivers in client mode. This will break client mode for images that
don't include wpa_supplicant or wpad, so maybe I need to add a check
somewhere to see if wpa_supplicant is available, and show the user a
warning if he tries client mode without wpa_supplicant. Suggestions on
where to add this check are welcome.

Tested with ath5k in client mode on open and wpa2-psk network, and
tested on my ath9k based AP as well to make sure it doesn't break AP mode.

SVN-Revision: 19718
2010-02-19 01:07:21 +00:00
Felix Fietkau
e1efddf19b mac80211: use wpa_supplicant for unencrypted connections to improve client mode reliability (patch by Stijn Tintel from #6653)
SVN-Revision: 19550
2010-02-08 13:42:14 +00:00
Felix Fietkau
64268c7165 hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+supplicant program (wpad) and remove the old wpa_supplicant package
SVN-Revision: 19286
2010-01-23 08:28:26 +00:00
Felix Fietkau
ba7bfddaae mac80211: restructure /lib/wifi/mac80211.sh use the new multi-bss single instance hostapd mode move mac80211 specific bits out of /lib/wifi/hostapd.sh add a new option 'htmode' for switching between HT20 and HT40+,HT40-
SVN-Revision: 19235
2010-01-20 02:26:05 +00:00
Felix Fietkau
b4ea1b0ac3 hostapd: parse the option for hiding the ESSID (#6310)
SVN-Revision: 18727
2009-12-09 19:10:54 +00:00
Felix Fietkau
7e3d67e546 hostapd: replace the wme_* config variables with wmm_* ones (fixes #6247)
SVN-Revision: 18602
2009-11-29 14:13:47 +00:00
Felix Fietkau
5501cf6ed8 hostapd: automatically add wds sta interfaces of an ap to the right bridge
SVN-Revision: 18365
2009-11-11 05:15:55 +00:00
Felix Fietkau
36eccaad21 hostapd: implement wds ap support
SVN-Revision: 18364
2009-11-11 05:15:51 +00:00
Felix Fietkau
a8ea28ad90 hostapd: update to latest git, remove openssl dependency for hostapd-full, it works with internal crypto now
SVN-Revision: 18360
2009-11-11 00:34:42 +00:00
Felix Fietkau
8a89f203a0 hostapd: use the new build variants feature to clean up the makefile
SVN-Revision: 18358
2009-11-10 22:00:59 +00:00