Commit graph

36823 commits

Author SHA1 Message Date
Paul Wassi
d6e8b1f841 uboot-envtools: add 'dockstar' for kirkwood
Add board 'dockstar' to known fw_env-configurations.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-21 10:10:38 +01:00
Piotr Dymacz
d86f08cc94 uboot-envtools: add support for YunCore CPE830
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
e33dcd1cfe ar71xx: add support for YunCore CPE830
CPE830 is a clone of AP90Q, with different type of antenna (panel)
and additional 4 LEDs for WiFi signal level indication.

Use the same flash approach as for YunCore AP90Q.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
dcceea4fd3 uboot-envtools: add support for YunCore CPE870
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
eb9ba2b91e ar71xx: add support for YunCore CPE870
YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341.
Short specification:

- 535/400/200 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, passive PoE support
- 64/128 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm
- internal 14 dBi panel antenna
- 8x LED, 1x button
- UART (JP1) header on PCB

Flash instruction (do it under U-Boot, using UART):

1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. setenv bootcmd "bootm 0x9f020000"
5. saveenv && reset

Vendor firmware access (login/password): Admin/5up

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
9ee8257cc7 uboot-envtools: add support for YunCore AP90Q
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
01dda0659e ar71xx: add support for YunCore AP90Q
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2.
Short specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, passive PoE support
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz with external PA, up to 29 dBm
- 2x internal 5 dBi omni antennas
- 4x LED, 1x button
- UART (JP1) header on PCB

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Flash instruction under vendor fimrware, using telnet/SSH:

1. Connect PC with 192.168.1.x address to WAN port
2. Power up device, enter failsafe mode with button (no LED indicator!)
3. Change root password and reboot (mount_root, passwd ..., reboot -f)
4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP
5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
6. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9f050000"
- mtd erase firmware
- mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
16afa08d19 ar71xx: add support for COMFAST CF-E380AC v1 and v2
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.

There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size

Version number is available only inside vendor GUI,
hardware and markings are the same.

Short specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
31952dbd1c ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.

All 3 devices are based on Qualcomm/Atheros QCA9531 v2.

COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)

COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Henryk Heisig
c380772c19 ipq806x: c2600: change wan and lan led trigger to swconfig port
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-11-21 10:04:55 +01:00
Henryk Heisig
8b1731964b ipq806x: enable swconfig LED support
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-11-21 10:04:55 +01:00
Kevin Darbyshire-Bryant
23e0b08a77 kernel: remove pipetypes unused var warning
Update patch to remove pipetypes var declaration which was throwing
unused variable warning due to the original patch removing the only use.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-11-21 10:00:49 +01:00
Pavel Kubelun
70434c3f94 ipq806x: switch to upstream usb driver and backport fixes
Also removing fifo-resize property drom DT as it has been removed from the driver.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-21 09:58:42 +01:00
Paul Wassi
6e65576f2d ar71xx: fix drivers/mtd/nand/ar934x_nfc.c
Fix the incorrect usage of ar934x_nfc_write_page and ar934x_nfc_write_page_raw.
Add *page* in the argument list and remove the local variable.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-18 21:57:19 +01:00
Felix Fietkau
16adf49620 lantiq: remove device specific sysupgrade image checks
Replaced by image metadata

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-20 20:08:48 +01:00
Felix Fietkau
b5ee86c4e5 ipq806x: remove device specific sysupgrade image checks
Replaced by image metadata

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-20 20:08:39 +01:00
Rafał Miłecki
0d3be662ce firmware-utils: tplink-safeloader: keep per-device info on trailing char
Recent refactoring introduced a regression. It ignored second argument
of make_support_list function which was originally true for C2600. The
new generic build_image function always passes false.

This patch allows specifying trailing char in a device specific info. It
also switches Archer C9 to the \0 char to make it compliant with vendor
images.

I verified generated images to be binary identical to the ones that
were created before whole refactoring.

Reported-by: Jo-Philipp Wich <jo@mein.io>
Fixes: fd924d2068 ("firmware-utils: tplink-safeloader: use one function for generating images")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-20 17:17:48 +01:00
Rafał Miłecki
746e63201b kernel: add bcm47xxpart patch fixing parsing with some TRX formats
This fixes parsing partition placed after TRX with block-aligned length.
It's important e.g. for Archer C9 which has TRX with kernel only and
rootfs as separated partition.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-20 16:43:58 +01:00
Pavel Kubelun
27c355f8a4 ipq806x: fix build errors
Add missing patches that broke LEDE builder while updating WDT driver

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-19 17:57:09 +01:00
Mathias Kresin
369317ce48 kernel: rtl8367(b): fix build error
Fix build on targets not using CONFIG_MODULE_STRIPPED.

Neither RTL8367_DRIVER_DESC nor RTL8367B_DRIVER_DESC are defined
anywhere. It worked for targets using CONFIG_MODULE_STRIPPED since our
module stripper no-ops the various module info macros.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-19 17:57:04 +01:00
Felix Fietkau
7738227321 lantiq: run append-metadata before check-size to fix build errors
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 14:19:27 +01:00
Wilfried Klaebe
81e3c022e0 x86: fix GRUB_ROOT for Xen subtarget
Change grub's root device to xen/xvda,msdos1 for the x86_xen_domu
target so that it will boot without further changes.

Signed-off-by: Wilfried Klaebe <w+lede-project@chaos.in-kiel.de>
[Jo-Philipp Wich: fixed and rebased patch from FS#264, added subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-19 11:45:29 +01:00
Felix Fietkau
478f1f6b16 ramips: append metadata to images
metadata checks are not enforced yet, because some images are still
being built by legacy code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:10 +01:00
Felix Fietkau
be296745f8 lantiq: append metadata to images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:10 +01:00
Felix Fietkau
9d6d7d9a0e ipq806x: append metadata to images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:10 +01:00
Felix Fietkau
77265e00c7 build: add support code for appending metadata to images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:10 +01:00
Felix Fietkau
cc853810a4 base-files: validate metadata of sysupgrade images
Use fwtool to extract it, only require metadata to be present if the
platform sysupgrade script sets REQUIRE_IMAGE_METADATA=1

Image metadata is in JSON format and contains a list of supported
devices, along with version information that could be displayed by a UI
later before the actual upgrade happens.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:09 +01:00
Felix Fietkau
929641fa1f fwtool: add utility for appending and extracting firmware metadata/signatures
This will be used to append extra information to images which allows the
system to verify if an image is compatible with the system.

The extra data is appended to the end of the image, where it will be
ignored when upgrading from systems that do not process this data yet:

If the image is a squashfs or jffs2 image, the extra data will land
after the end-of-filesystem marker, where it will be overwritten once
the system boots for the first timee.

If the image is a sysupgrade tar file, tar will simply ignore the extra
data when unpacking.

The layout of the metadata/signature chunks is constructed in a way
that the last part contains just a magic and size information, so that
the tool can quickly check if any valid data is present without having
to do a pattern search throughout the full image.

Chunks also contain CRC32 information to detect file corruption, even
when the image is not signed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-19 11:24:09 +01:00
Rafał Miłecki
5e339a48aa bcm53xx: build image for TP-LINK Archer C9 v1
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:26 +01:00
Rafał Miłecki
2d61c26f02 bcm53xx: support SafeLoader format in sysupgrade
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:26 +01:00
Rafał Miłecki
222783c65c firmware-utils: tplink-safeloader: add Archer C9 support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:25 +01:00
Rafał Miłecki
1c6fd8c1ee osafeloader: new util for extracting partitions from SafeLoader
SafeLoader is image format used by some TP-LINK devices. This tool
allows extracting selected partitions out of it. It can be used for
sysupgrade.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:25 +01:00
Rafał Miłecki
eab2b17d43 bcm53xx: add kernel support for TP-LINK Archer C9 V1
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:25 +01:00
Rafał Miłecki
fd924d2068 firmware-utils: tplink-safeloader: use one function for generating images
Thanks to the struct device_info we can now use one unified function.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:57:58 +01:00
Rafał Miłecki
ea249f01b1 firmware-utils: tplink-safeloader: add struct device_info
This struct stores all device specific info which allows making do_eap
function more generic.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:57:56 +01:00
João Chaínho
5dd13c071b ar71xx: enable serial console on mikrotik devices
This patch enables the serial console on some Mikrotik devices (RB450,
RB450G, RB493G, RB750UP).

Signed-off-by: João Chaínho <joaochainho@gmail.com>
2016-11-18 09:41:14 +01:00
Vitaly Chekryzhev
348344874c ramips: add support for ZyXEL Keenetic Viva
Factory image can be installed via Zyxel WebUI.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
[removed linux,modalias parameter from flash node in dts]
[removed sdhci node from dts; no sd card slot here]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-18 08:54:57 +01:00
Vitaly Chekryzhev
a4814c744c firmware-utils: add tool to create zyxel images
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
[moved to firmware-utils package]
[dropped the compiled binary]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-17 20:01:21 +01:00
Vitaly Chekryzhev
4545a60edb kernel/modules: add kmod-switch-rtl8367b
Add build option for RTL8367R/VB switches.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2016-11-17 20:01:21 +01:00
Vitaly Chekryzhev
5f38d1ad85 ramips: add MT7620 MIB support for switch and port
Move definitions to header. Replace array size definitions with macro.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
[merged into 0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: John Crispin <john@phrozen.org>
2016-11-17 20:01:21 +01:00
Hannu Nyman
8459d85fa3 ipq806x: refresh patches
This patch refreshes the ipq806x kernel patches.

There was a large PR for ipq806x in the queue when the kernel patches
were refreshed for 4.4.32, so currently there is quite much fuzz for
ipq806x.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-17 14:23:01 +01:00
Felix Fietkau
d723f2573a libnl-tiny: remove include/linux overrides to fix various build issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-17 13:36:09 +01:00
Jasper Scholte
3d680c5728 ramips: add support for Sitecom WLR-6000
The Sitecom firmware upgrade file has SENAO_FIRMWARE_TYPE 2 set. This
looks rather wrong since SENAO_FIRMWARE_TYPE 2 is kernel only but the
file is way to big for only including a kernel.

The factory image need to have the dlf file extension. Otherwise the
Sitecom firmware rejects the file.

The stock firmware uses the following mac addresses:

LAN: 00:0C:F6:AA:BB:D8 (u-boot env: ethaddr)
2,4: 00:0C:F6:AA:BB:D8 (EEPROM)
5:   00:0C:F6:AA:BB:DC (EEPROM)
WAN: 00:0C:F6:AA:C8:43 (u-boot env: wanaddr)

Assuming the mac address range :D8 to :DC is reserved for this device,
the MAC addresses were reorder to have a unique MAC address for each
interface:

2.4GHz: 00:0C:F6:AA:BB:D8
LAN:    00:0C:F6:AA:BB:D9
WAN:    00:0C:F6:AA:BB:DA
5 GHz:  00:0C:F6:AA:BB:DC

The first MAC is assigned to the 2.4GHz WiFi interface
to keep compatibility with the SSIDs printed on the case, which have
the last three sextets of the MAC address appended.

There are still issues with the rt2x00 driver. It is not possible to
use both wireless interfaces at the same time. The 2.4 GHz
wireless (PCIe) only works if the internal 5GHz wireless is/has been
enabled or used for scanning. The internal 5GHz wireless only works if
the 2.4GHz wireless (PCIe) was never enabled. Disabling the 2.4Ghz
after it was enabled will result in stations seeing the 5Ghz AP but are
unable to connect.

Due to the not optimal working wifi the manufacture, backup and storage
partitions of the OEM firmware are kept for now to allow an easy switch
back to the Sitecom firmware.

Signed-off-by: Jasper Scholte <NightNL@outlook.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-17 06:39:52 +01:00
Dominik Menke
8b65fef173 ramips: add support for Digineo AC1200 Pro
This is basically a ZBT-WG3526 (mt7621 SoC), but with 32M flash.

Signed-off-by: Dominik Menke <dom@digineo.de>
2016-11-17 06:39:52 +01:00
Dominik Menke
6e3d7897f7 ramips: cleanup ZBT-WG3526.dtsi
- replace magic numbers with GPIO_* constants
- replace generic PCI definitions with correct vendor and
  device identification

Signed-off-by: Dominik Menke <dom@digineo.de>
2016-11-17 06:39:52 +01:00
Dominik Menke
efbb654f6c ramips: split ZBT-WG3526.dts into dtsi and dts files
Signed-off-by: Dominik Menke <dom@digineo.de>
2016-11-17 06:39:52 +01:00
Jason A. Donenfeld
9db46da8d7 kernel: enable pcrypt
This is a powerful API for parallel crypto from which many other modules
can benefit. It only winds up being turned on on SMP systems, which
means this adds 0 bytes to the kernel on tiny machines, while only
adding a small bit to SMP systems for big performance improvements.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2016-11-16 23:38:34 +01:00
Felix Fietkau
16faf4aeaa octeon: fix feature flag for initramfs support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-16 23:37:27 +01:00
Matthias Schiffer
c18bf14dab
hostapd: fix PKG_CONFIG_DEPENDS for CONFIG_WPA_SUPPLICANT_*
These symbols don't affect wpa-supplicant only, but also wpad.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 20:59:17 +01:00
Stijn Tintel
8e47655d4e kernel: update kernel 4.4 to version 4.4.32
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-11-16 17:31:29 +01:00