Commit graph

172 commits

Author SHA1 Message Date
Kevin Darbyshire-Bryant
088e28772c kernel: update kernel 4.4 to version 4.4.69
Refresh patches. A number of patches have landed upstream & hence are no
longer required locally:

062-[1-6]-MIPS-* series
042-0004-mtd-bcm47xxpart-fix-parsing-first-block

Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup
as it was incorrectly included upstream thus dropped from LEDE.
As it has now been reverted upstream it needs to be included again for
LEDE.

Run tested ar71xx Archer C7 v2 and lantiq.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[update from 4.4.68 to 4.4.69]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:48:16 +02:00
Matthias Schiffer
be40d0a144
sunxi: clean up modules definitions
Module definitions for kmod-wdt-sunxi and kmod-eeprom-sunxi are removed
(wdt-sunxi was builtin anyways; nvmem-sunxi, which is the new name of
eeprom-sunxi is changed to builtin). As kmod-eeprom-sunxi was specified
in DEFAULT_PACKAGES, but not available on kernel 4.4, it was breaking the
image builder.

Support for kmod-sunxi-ir is added for kernel 4.4 (it is unclear why it
was disable before, it builds fine with with kernel 4.4).

Condtionals only relevant for pre-4.4 kernels are removed from modules.mk,
as sunxi does't support older kernels anymore.

Fixes FS#755.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-04 07:07:18 +02:00
Felix Fietkau
0b7ed65cec kernel: remove out of tree direct-io disable hack
Direct-IO support has to be enabled for the release build anyway, so
this hack is not worth keeping

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-26 10:27:45 +02:00
Felix Fietkau
9467ce42da build: get rid of host.mk
Defined required host related variables in toplevel.mk instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-26 13:31:44 +01:00
Jo-Philipp Wich
cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Felix Fietkau
e018c4d7ab uboot-sunxi: clean up, switch to u-boot.mk
Instead of referencing u-boot packages from device profiles and having a
-all metapackage, make the u-boot packages hidden (they don't install to
bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Yousong Zhou
0ac00c931c sunxi: use fwtool for checking sdcard images
To achieve this, device tree compatible string was used as boardname and
the value of it will be checked against supported_devices list.

It should be noted that we do not distinguish between
sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts
file.

The other thing is that we need to gunzip the generated firmware to do
fwtool check.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:15 +01:00
Yousong Zhou
5ece16fd23 sunxi: add sysupgrade support
Enalbe builtin support for FAT filesystem as we need to mount boot
partition to store sysupgrade.tgz there

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:15 +01:00
Yousong Zhou
8a2c56ca03 sunxi: make sdcard image with squashfs as rootfs
Two things that need to be noted

 - There is no partition type id allocated for squashfs yet.  In the
   case of sunxi, any non-zero value should work and we keep it 83 (the
   value for ext4)
 - Remaining spare space within the rootfs partition, not the entire
   sdcard space will be formated as either f2fs or ext4 and mounted as
   overlay to serve the role of rootfs_data.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Yousong Zhou
4eb0fd8283 sunxi: convert to new image generation method
The new Device/xxx were transformed automatically from old profiles.

Most device names are now taken from basename of the corresponding
kernel device tree file.  Device/sun5i-a13-olimex-som is an exception
because it is not explicitly supported in the kernel yet and shares the
same dts file with Device/sun5i-a13-olinuxino

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Yousong Zhou
d53fcdefbf sunxi: enable loopback device and f2fs support
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Yousong Zhou
76ee28ce9d sunxi: fix dts name for Mele M9
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:13 +01:00
Felix Fietkau
f3096e6322 sunxi: enable CONFIG_VHOST_NET like on x86
Other virtualization options are already enabled, so this is only a
small addition

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:25:16 +01:00
Yousong Zhou
715fd8c5bc target: sunxi: enable builtin crypto-hw module sun4i-ss
CONFIG_CRYPTO_DEV_SUN4I_SS was previously set to y but did not take
effect because of the absence of CONFIG_CRYPTO_HW=y

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:19 +01:00
Yousong Zhou
468735c3a2 target: sunxi: enable kvm support
Unlike x86, kvm for arm has to be built into the kernel.  The kernel
config was prepared with the following command

    make kernel_menuconfig CONFIG_TARGET=platform

Then enable ARM_LPAE, VIRTUALIZATION, KVM in that order

Other config changes are done by the build system.  The following text
tries to explain some of them, for archive purposes probably...

 - BUILD_BIN2C.  It was dropped probably because the prompt is empty and
   no other config option selects it.  bin2c is a host executable for
   converting binary content to a piece of c code for inclusion
 - CRYPTO_DEV_SUN4I_SS.  It was dropped because the dependency CRYPTO_HW
   was not enabled.  Setting that aside, packaging it as a loadbable
   module in lieu of other sunxi specific modules seems more appropriate
 - PGTABLE_LEVELS.  It was changed from 2 to 3 because 3 is the default
   when ARM_LPAE is enabled
 - HAVE_KERNEL_GZIP, etc..  These are enabled in generic config
 - SCHED_INFO, ZLIB_INFLATE.  These were dropped probably for the same
   reason as for BUILD_BIN2C

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:18 +01:00
Álvaro Fernández Rojas
87b2b89959 tools: remove old mkdosfs symlink from dosfstools
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-12 11:59:09 +02:00
Álvaro Fernández Rojas
a530196f8d sunxi: add rtl8xxxu into pcduino v3 profile
Now that RTL8188EU is supported in rtl8xxu select it for pcDuino v3

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 20:23:46 +02:00
Alexey Brodkin
84a1a0edf0 sunxi/pcduino3: Remove selection of absent rtl8188eu
Since commit 217a643755 "wireless: remove rtl8188eu (staging)"
there's no point in selection of the missing module.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@openwrt.org>
Cc: Zoltan Herpai <wigyori@uid0.hu>
2016-07-23 12:27:42 +02:00
Rafał Miłecki
cf6d9d97fb kernel: rename B53 symbols to avoid upstream kernel conflict
In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-20 08:00:14 +02:00
Dirk Neukirchen
bf89f5404b sunxi: remove NAMESPACES config symbols
they are available in config/Config-kernel.in

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-06 14:58:11 +02:00
Dirk Neukirchen
8f6df9465e sunxi: remove XFRM_ config symbols
they are part of packages

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-06 14:58:11 +02:00
Felix Fietkau
638a5682e1 kernel: remove bogus CONFIG_LOG_BUF_SHIFT overrides
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:35:41 +02:00
Felix Fietkau
be83f982a7 sunxi: delete old kernel versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:52:20 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
Hauke Mehrtens
7768735873 kernel: update kernel 3.18 to version 3.18.27
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48874
2016-03-01 23:16:17 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Zoltan Herpai
9c0d3fcf82 sunxi: add descriptor files for wifi+bt modules (AP6181/6210), add brcmfmac to bananapro profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48757
2016-02-24 23:31:48 +00:00
Zoltan Herpai
42cd31a777 sunxi: update orangepi-plus profile to reflect the real uboot package
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48626
2016-02-03 23:57:35 +00:00
Zoltan Herpai
8ebc9e7539 sunxi: bump to 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48620
2016-02-03 01:24:42 +00:00
Zoltan Herpai
a9c21dd395 sunxi: add support for Orange Pi Plus (H3)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48618
2016-02-02 22:25:05 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Felix Fietkau
57690041fa kernel: clean up redundant SLUB/SLAB related defines for 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48443
2016-01-21 16:08:19 +00:00
Hauke Mehrtens
ba3a749f9b kernel: refresh patches for kernel 4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48222
2016-01-12 20:50:41 +00:00
Zoltan Herpai
a6611a92d5 sunxi: initial 4.4 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48161
2016-01-09 16:20:39 +00:00
Zoltan Herpai
24894e52bc sunxi: prep module support options for 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48160
2016-01-09 16:19:21 +00:00
Zoltan Herpai
de4145c102 sunxi: fix Lamobo R1 board detection
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48130
2016-01-04 15:53:36 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
f906975e2d sunxi: fix Lamobo Banana Pi R1 detection
Change the case switch to reflect the value used in the corresponding
device tree file.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47833
2015-12-11 11:00:14 +00:00
Jo-Philipp Wich
8298dfef5c sunxi: fix board.d permissions
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47760
2015-12-04 14:39:20 +00:00
Jo-Philipp Wich
b6a9c5c400 sunxi: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47758
2015-12-04 14:32:52 +00:00
Hauke Mehrtens
f0a5f24217 kernel: update 4.1 to 4.1.13
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx

Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47694
2015-12-02 21:52:41 +00:00
Hauke Mehrtens
55a912f43e kernel: update kernel 3.18 to version 3.18.23
Changelog:
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47334
2015-11-01 13:45:57 +00:00
Hauke Mehrtens
da94b00df5 kernel: update kernel 4.1 to version 4.1.11
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47252
2015-10-25 17:32:01 +00:00
Felix Fietkau
e29efa2fb7 kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4
Everything except for blkcipher was already built-in, so make blkcipher
built-in as well.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46820
2015-09-08 12:31:04 +00:00
Jonas Gorski
2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
Zoltan Herpai
e0d332cdbe sunxi: bump to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46705
2015-08-21 13:23:29 +00:00
Zoltan Herpai
79e1aa2ac3 sunxi: add audio module for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46704
2015-08-21 13:16:11 +00:00
Zoltan Herpai
ed1a7a2deb sunxi: update ahci package list for a couple board profiles
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46703
2015-08-21 10:16:15 +00:00
Zoltan Herpai
c00198216a sunxi: reorganize kmod-ata-sunxi dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46702
2015-08-21 10:08:07 +00:00
Zoltan Herpai
1c66ebcd2d sunxi: respect CONFIG_TARGET_IMAGES_GZIP
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46608
2015-08-15 15:10:14 +00:00