Commit graph

13445 commits

Author SHA1 Message Date
John Crispin
7b3354bb92 generic: fix broken patch in the transition of 3.19 from -rc5 to release .0
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 44416
2015-02-12 08:07:20 +00:00
Rafał Miłecki
30d6bc1026 kernel: mtdsplit_uimage: read more data to match Edimax needs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44415
2015-02-12 07:50:07 +00:00
Rafał Miłecki
072759ff39 kernel: mtdsplit_uimage: use separated buffer for reading data
We shouldn't read data directly into the header struct, as some devices
(e.g. Edimax) need more bytes due to some extra header.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44414
2015-02-12 07:44:34 +00:00
Rafał Miłecki
5673e0b703 kernel: mtdsplit_uimage: add parser for Edimax devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44413
2015-02-12 07:23:40 +00:00
Rafał Miłecki
1aed104c80 mtdsplit_uimage: more generic header verify function
Some devices have uImage headers after some extra headers (e.g. Edimax
devices). To support such cases our verify callback function should be
allowed to return header offset, not just a boolean value.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44412
2015-02-12 06:57:24 +00:00
Rafał Miłecki
1f3cdb8634 kernel: fix bgmac check for chip ID
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44411
2015-02-11 18:11:22 +00:00
Rafał Miłecki
e73ca898ab kernel: backport mainlined bgmac patches from 3.19
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44410
2015-02-11 17:35:09 +00:00
Rafał Miłecki
b5310e180d bcm53xx: use bcm47xx_wdt for restarting device
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44408
2015-02-11 14:41:07 +00:00
John Crispin
1aaa72103b oxnas: disable usbgadget support
usbgadget was initially enabled in the hope to support gadget mode
as it seems to be supported by the hardware.
However, it currently breaks things and doesn't work anyway, so
remove the usbgadget feature.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44407
2015-02-11 13:50:56 +00:00
John Crispin
eaec1e41b1 brcm2708: add missing SUBTARGETS:= to makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44405
2015-02-11 13:09:39 +00:00
John Crispin
b67a6f65d6 brcm2708: remove CMA_DEBUG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44404
2015-02-11 13:05:37 +00:00
John Crispin
cafc77f74c brcm2708: add Raspberry Pi 2 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44403
2015-02-11 13:05:31 +00:00
John Crispin
146c9aff27 brcm2708: remove 3.14 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44402
2015-02-11 13:05:23 +00:00
John Crispin
0f4431758b ralink: fix when tx done is 0 also need to clean interrupt status
Signed-off-by: michael lee <igvtee@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44401
2015-02-11 13:05:14 +00:00
Nicolas Thill
29a57ce073 ramips/mt7620: add missing config symbol
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44399
2015-02-11 12:13:49 +00:00
John Crispin
e7d8a82a5c cns3xxx: set v3.18 as default
tested on a nor and a spi laguna

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44393
2015-02-11 10:21:02 +00:00
John Crispin
408c969626 brcm2708: update to v3.18
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44392
2015-02-11 10:17:55 +00:00
John Crispin
f90d9d486a lantiq: fix VG3503J partition table for newer kernels
the kernel has increased and does not fit into the 1,5MB anymore.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44391
2015-02-11 10:17:38 +00:00
Rafał Miłecki
6bafb2f810 bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44390
2015-02-11 10:11:00 +00:00
John Crispin
96ab322414 malta: add config file for kernel 3.19.
This is based on config-3.18 with the following changes.

 - CONFIG_GENERIC_NET_UTILS is removed as it is already set in generic
   kernel config.
 - CONFIG_CPU_MICROMIPS is explicitly unset as required in kernel 3.19.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 44388
2015-02-11 10:09:56 +00:00
John Crispin
038f8e1eda generic: add a few missing symbols for generic config-3.19.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 44387
2015-02-11 10:09:40 +00:00
John Crispin
88ddb37461 ipq806x: update target to v3.18
Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386
2015-02-11 10:09:23 +00:00
Rafał Miłecki
ddcbef5766 kernel: backport bcma patches queued for 3.20
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44385
2015-02-11 10:04:51 +00:00
Rafał Miłecki
d417d58ff7 kernel: 3.18: complete backport of some bcma patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44384
2015-02-11 09:14:48 +00:00
Rafał Miłecki
3ae30df7db bcm53xx: drop unused (and broken) GPIOLIB patch
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44383
2015-02-11 08:42:34 +00:00
Luka Perkov
92f324d333 kernel: switch 3.19 from -rc5 to release .0
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44381
2015-02-10 22:36:59 +00:00
John Crispin
a2fcaa77fc ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()
This patch adds the mc-mac1200r target to do_load_ath10k_board_bin() in
target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin to load the
ath10k radio MAC address from the EEPROM in MERCURY MAC1200R devices

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44375
2015-02-10 05:52:53 +00:00
John Crispin
69c160d867 oxnas: switch to 3.18
Tested on stg212 and kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44374
2015-02-10 05:52:48 +00:00
John Crispin
eee58211a8 kernel: add missing symbol
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44373
2015-02-10 05:52:41 +00:00
John Crispin
07352ca2c7 ralink: fix hw status almost full not work on mt7620 and mt7621
the old FE_INT_STATUS register becomes two registers.
FE_INT_STATUS and INT_STATUS. so the hw status almost full
must change to read from FE_INT_STATUS register.
tx/rx done read from INT_STATUS register.

mt7620 datasheet define CNT_GDM1_AF at BIT(29).
but after test it should be BIT(13). why?

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44371
2015-02-09 19:34:49 +00:00
John Crispin
525cd8aedb ralink: change rt3883 cpu type to 74kc
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44370
2015-02-09 19:34:32 +00:00
John Crispin
3ebd262202 realview: r44368 contained a superflous patch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44369
2015-02-09 19:28:34 +00:00
John Crispin
75fe1afa95 realview: bump to 3.18
Signed-off-by: Your Name <blogic@openwrt.org>

SVN-Revision: 44368
2015-02-09 19:24:48 +00:00
Rafał Miłecki
3dbaab6f67 bcm53xx: fix loading SPROM content by bcma init change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44367
2015-02-09 18:43:05 +00:00
John Crispin
ed84ceaa02 ixp4xx: add v3.18 support
Signed-off-by: Your Name <blogic@openwrt.org>

SVN-Revision: 44363
2015-02-09 14:24:00 +00:00
John Crispin
b523db36a0 ar71xx: dir-505: fix reset button gpio active_low value
Fix 'active_low' default value for the reset button on DIR-505.

Signed-off-by: Rocco Folino <rocco@devzen.net>

SVN-Revision: 44360
2015-02-09 12:17:00 +00:00
John Crispin
a5b60de253 ar71xx: Add support for MERCURY MAC1200R
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44359
2015-02-09 12:16:51 +00:00
John Crispin
35d38f21e0 ar71xx: fix nbg6716 power and usb led
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com>

SVN-Revision: 44358
2015-02-09 12:16:43 +00:00
John Crispin
ba1904056d oxnas: copy ubinized images to binary folder
Since r43778 ubinized images are stored inside KDIR. This makes sense
when using an uninized image to generate a factory image.
On oxnas ubinized images were used for sysupgrade before proper NAND
support was implemented in OpenWrt.
For users still on old builds before sysupgrade.tar was introduced,
ubinized image is thus the only option to conveniantly upgrade to a
more recent build.
Copy ubinized image also to BIN_DIR, so it will be easier for users
to find them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44357
2015-02-09 12:16:04 +00:00
John Crispin
4ce7053b2b ramips: Kingston MLW221 and MLWG2 cleanup
MLW221 dts use tabs NOT spaces.
MLWG2 dts typo and 1 tab not spaces
01_leds and diag.sh cleanup

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 44356
2015-02-09 12:15:45 +00:00
John Crispin
2c03605028 ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini
This patch sets the correct location of the mt76 radio in the pcie bridge
(pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44355
2015-02-09 12:15:17 +00:00
John Crispin
2dd7bce338 ramips: Add mt76 node for Lenovo Y1 and Y1S.
Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch.
Tested on Lenovo Y1.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 44354
2015-02-09 12:15:00 +00:00
John Crispin
1c0c1ebc6b lantiq: td-w8970: fix failsafe mode
Fix failsafe mode for TD-W8970, register interface for preinit.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44353
2015-02-09 12:14:48 +00:00
John Crispin
1c9dc26ce9 lantiq: td-w8970: fix reset button
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44352
2015-02-09 12:14:32 +00:00
John Crispin
983f902177 octeon: switch to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44350
2015-02-09 12:14:09 +00:00
John Crispin
654bc380ec ralink: add 3.18 support
keep default as 3.14, mt7621 gic need to be ported to 3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44349
2015-02-09 12:13:55 +00:00
John Crispin
826b461427 lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44348
2015-02-09 12:13:25 +00:00
John Crispin
682cf3b854 au1000: add 3.18 support
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44345
2015-02-09 12:12:39 +00:00
John Crispin
9f0f80faac ar7: add 3.18 support
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44344
2015-02-09 12:12:30 +00:00
John Crispin
6fd1e60748 malta: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44342
2015-02-09 12:11:34 +00:00