Commit graph

22 commits

Author SHA1 Message Date
Mathias Kresin
79d92bb7ac lantiq: VGV7519 - cleanup pinmux configuration
Cleanup the pinmux configuration by removing the unused spi node. Nothing is connected to the SPI bus on devices.

The stp_out pinmux child node covers the same GPIOs as the already used
stp group.

The same applies to the gphy-leds_out pinmux node and the "gphy0
led1" as well as "gphy1 led0" groups.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
Mathias Kresin
8a382f1221 lantiq: VGV7519 - remove/merge redundant parts in dts
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
John Crispin
a0e8833cb5 lantiq: VGV7510KW22/VGV7519 update spi pinmux group
With the backport of the kernel 4.5 pinctrl-xway patches (3551609d &
826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" &
"spi_clk". But the no longer existing group "spi" is still used by some
device tree source files.

This fixes the detection of the wireless chipset of the VGV7510KW22.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48658
2016-02-08 08:25:31 +00:00
Felix Fietkau
022855baf2 lantiq: Move the definition of the xrx200-net node to vr9.dtsi
This removes a lot of duplicate register and interrupt definitions by
moving the xrx200-net definition to vr9.dtsi and making all devices re-
use it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48547
2016-01-29 00:42:45 +00:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin
a3042500ab lantiq: define default leds in dts files
- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48037
2016-01-01 21:18:08 +00:00
John Crispin
4d7ae64b73 vgv7519: support more recent board release with vrx288 v1.2
The existance of this new board has been confirmed and tested by the guy on this commit

76fdd8e638

SVN-Revision: 43072
2014-10-26 17:18:41 +00:00
John Crispin
0f790247e3 lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 42907
2014-10-14 11:04:25 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
SVN-Revision: 42824
2014-10-06 20:08:30 +00:00
John Crispin
6a961da231 lantiq - vgv7519: enable pci bus
SVN-Revision: 42823
2014-10-06 20:08:18 +00:00
John Crispin
c2e4007bc1 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else
SVN-Revision: 42822
2014-10-06 20:08:11 +00:00
John Crispin
4cdf861521 lantiq - vgv7519: fix open-drain configuration for stp
SVN-Revision: 42821
2014-10-06 20:08:04 +00:00
John Crispin
1e7962ceaf lantiq - vgv7519: add pci-rst entry into dts
SVN-Revision: 42820
2014-10-06 20:07:56 +00:00
John Crispin
ea9aec2fa9 lantiq - vgv7519: remove exin definition copied from dev-board dts
SVN-Revision: 42819
2014-10-06 20:07:45 +00:00
John Crispin
9483a322dd lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
SVN-Revision: 42818
2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
SVN-Revision: 42817
2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
SVN-Revision: 42816
2014-10-06 20:07:04 +00:00
John Crispin
4beb468f11 lantiq: fix board_id/boardname for VGV7519
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41672
2014-07-16 11:36:02 +00:00
John Crispin
85cacfd753 lantiq: vgv7519 add missing wps label to dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41655
2014-07-14 18:43:02 +00:00
John Crispin
e6c46554bb lantiq: fixup vgv7519 usb support
https://dev.openwrt.org/ticket/16800

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41213
2014-06-16 18:54:33 +00:00
John Crispin
4f3797386f lantiq: add support for VGV7519 KPN Experia box v8
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
2013-09-30 20:48:46 +00:00