Commit graph

36447 commits

Author SHA1 Message Date
Hauke Mehrtens
559fb537d8 build: use CXXFLAGS if defined
Instead of using TARGET_CFLAGS and EXTRA_CFLAGS in cmake and scons
build use the TARGET_CXXFLAGS and EXTRA_CXXFLAGS like it is done for
normal make and configure. configure used TARGET_CXXFLAGS and
EXTRA_CFLAGS for the CXXFLAGS. The package-default.mk sets
"EXTRA_CXXFLAGS = $(EXTRA_CFLAGS)" so using EXTRA_CXXFLAGS flags should
be save.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-10-13 17:04:43 +02:00
Karl Palsson
5d04dcedb4 ar71xx: move dragino2 from legacy to generic
Tested on real hardware with r1804.

Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-10-13 17:04:38 +02:00
Christian Lamparter
4fc48a8cf2 apm821xx: replace recovery image for the MBL with initramfs
The patch "images: bump default rootfs size to 256 MB"
a1f83bad60 caused a crash
during boot for the recovery images. This is because
both variants of the MyBook Live only have 256MB of RAM
and for the recovery option, the ext4 rootfs was simply
stored in the RAMDISK.

This patch replaces recovery image for the MBL with an
initramfs kernel.

In order to boot the initramfs (for recovery or development):

0. copy the initramfs and device tree into tftp's server directory
   # cp *-initramfs-kernel.bin to /tftp-server/mbl.bin
   # cp *-ext4-kernel.dtb to /tftp-server/fdt.bin

1. Connect the MyBook Live (Duo) serial port.
   (Warning! Use a 3.3v level shifter).

2. Hit Enter during u-boot and insert these three lines:
   # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1;
   # tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin
   # run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r}

   Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-13 17:04:33 +02:00
daniel
4104613fae kernel: ext4: Add missing kmod-crypto-crc32c dependency
This fixes the following error when mounting a ext4 filesystem
----
[  166.240000] EXT4-fs (sda1): Cannot load crc32c driver.
----

Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
2016-10-13 17:04:28 +02:00
Yousong Zhou
d1000f81a8 x86: 64: enable pci hotplug and acpipnp
This will allow dynamically adding/removing at least virtio-net pci
devices which are quite the norm in cloud environment with QEMU/KVM

    netdev_add bridge,id=wan2,br=br-wan,helper=/home/yousong/.usr/libexec/qemu-bridge-helper
    device_add virtio-net-pci,id=devwan2,netdev=wan2,mac=11:22:33:22:11:00

The config was formed by selecting target x86/64 first, then select
CONFIG_HOTPLUG_PCI and CONFIG_HOTPLUG_PCI_ACPI with

    make kernel_menuconfig CONFIG_TARGET=subtarget

The following text tries to explain how the current config was formed

 1. CONFIG_PCI_LABEL and CONFIG_ATA_PIIX were removed because they were
    already enabled in x86 platform config
 2. CONFIG_ATA_SFF was removed because it was enabled in generic config
 3. CONFIG_NLS was removed because it will be selected by CONFIG_PCI_LABEL

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-10-13 17:04:26 +02:00
Felix Fietkau
8869dd47ca ubus: update to the latest version, adds a race fix for wait_for
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-12 20:02:28 +02:00
Felix Fietkau
b306f8254f tools: add missing dependency for dosfstools
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-12 12:25:27 +02:00
Álvaro Fernández Rojas
5f0965f8d2 dosfstools: fix autotools dependency
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-12 12:22:38 +02:00
Álvaro Fernández Rojas
4bbc6fb7b7 tools: improve and simplify dosfstools
- use default host install and clean.
- backport compatibility patch for OS X and LEDE (avoids having to force iconv
for OS X).
- use default HOST_BUILD_DIR.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-12 11:59:10 +02:00
Álvaro Fernández Rojas
87b2b89959 tools: remove old mkdosfs symlink from dosfstools
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-12 11:59:09 +02:00
Felix Fietkau
db47363ff7 uqmi: re-enable autoconnect which was dropped without explanation
Fixes a regression in commit 8f24ee6382:
"uqmi: Add proper IPv6 support"

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-12 11:58:59 +02:00
Felix Fietkau
3b9b963e6e uqmi: always use DHCP for IPv4
Commit 8f24ee6382 ("uqmi: Add proper IPv6 support") changed the code
to fetch the IPv4 address via QMI by default instead of using DHCP to
make it consistent with the IPv6 codepath.
This breaks on at least some Sierra Wireless cards, where data exchanges
fail to work until the host has fetched a DHCP lease.
Leave v6 as it is, but always use DHCP for v4.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-12 11:58:57 +02:00
Florian Beier
5abeba3450
ar71xx: add userspace support for D-Link DIR-869 A1, generate images
Signed-off-by: Florian Beier <beier.florian@gmail.com>
[Matthias Schiffer: fix factory image, improve commit message]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-11 22:58:37 +02:00
Matthias Schiffer
594f0e80ce
ar71xx: add kernel support for D-Link DIR-869 A1
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-11 22:58:36 +02:00
Matthias Schiffer
e407f1a4c8
ar71xx: add back SEAMA header checksum fix (as used on ramips)
The D-Link DIR-869 A1 doesn't accept images with the jffs2 marker added
after the checksummed range, so we need to include it in the checksum and
fix it on first boot.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-11 20:57:59 +02:00
Matthias Schiffer
212ce6bce1
ar71xx: avoid double lzma compression of kernel for SEAMA images
Use relocation loader instead of lzma loader.

Tested on D-Link DIR-869 A1.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-11 20:57:51 +02:00
Matthias Schiffer
0d1fb72241
ar71xx: add relocation loader
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-11 20:39:16 +02:00
Matthias Schiffer
fce0b5d893
ar71xx: clean up SEAMA image build code
Split seama-factory and seama-sysupgrade into smaller pieces (similar to
the ramips code) to make the image generation more flexible.

Also use standard pad-offset instead of adding a block of zeros at the
beginning of the image that is later cut off again. Standard pad-rootfs can
be used as the seal header doesn't contain an image size or checksum.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-11 20:32:24 +02:00
Jo-Philipp Wich
b81fc29123 include: prereq-build.mk: improve gcp check
Adjust the check for gcp (GNU copy command) to rule out false positives
with "Goffi's CoPier" a python copy command.

Fixes FS#218.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-11 10:07:25 +02:00
Mathias Kresin
0547b3ca64 lantiq: fix lantiq-dsl output spam
In case the adsl/vdsl service is disabled intentional, the output is
cluttered with the following message multiple times if the status of
the dsl line is queried:

  killall: vdsl_cpe_control: no process killed

If the dsl line status is queried by LuCI, the logfile is spammed with
the message.

Fix the issue by using killall in quite mode. In quite mode killall
still returns a non-zero value if the to be killed process can not be
found so that existing logic based on the return value still works.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-11 09:31:57 +02:00
Mathias Kresin
e6b2880276 netfilter: remove nf_tproxy_core references
nf_tproxy_core was removed during 3.12 development with kernel commit
fd158d79d33d3c8b693e3e2d8c0e3068d529c2dc. The code was moved
to xt_TPROXY.c.

Fixes FS#212

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-11 09:03:12 +02:00
Amir Rachum
4c36bcc567
ar71xx: build image for Archer C7 v2 IL
TP-Link uses a different region coding mechanism for IL firmware for the Archer
C7 v2. Instead of of setting the region, they set a different TPLINK_HWREV.

Signed-off-by: Amir Rachum <amir@rachum.com>
2016-10-09 21:13:09 +02:00
Felix Fietkau
175b59c59b uhttpd: update to the latest version, adds a small json handler fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-08 13:50:54 +02:00
Álvaro Fernández Rojas
757228b137 mac80211: update rtl8xxxu patches
Adds the latest patches from Jes Sorensen for rtl8xxxu, which improve
rtl8732bu, rtl8192eu and rtl8188eu support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-08 09:41:26 +02:00
Álvaro Fernández Rojas
7cc89af937 kernel: update kernel 4.4 to version 4.4.24
Refresh patches for all targets that support kernel 4.4.
compile/run-tested on brcm2708/bcm2710 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-08 09:40:15 +02:00
Mathias Kresin
993ca3b747 lantiq: fix BTHOMEHUBV2B default packages
Due to the introduced double whitespace the default package selection
isn't applied. This leads to errors like a not working networking
because of a missing swconfig binary.

Fixes FS#208.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-06 22:58:50 +02:00
Mathias Kresin
82b8eaa89f scripts/diffconfig.sh: fix output if TARGET_PER_DEVICE_ROOTFS is set
diffconfig show packages selected as dependencies of
TARGET_PER_DEVICE_ROOTFS as individual selected.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-06 22:00:10 +02:00
Jo-Philipp Wich
66a62b8966 tools: do not apply ccache dependency to xz
Since XZ is needed to bootstrap building ccache we must not depend on it,
so remove the dependency on ccache to avoid circular dependencies.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 15:29:33 +02:00
Jo-Philipp Wich
27950ddc0e tools: xz: force building without ccache
Since XZ is required to bootstrap ccache we must not use the ccache compiler
wrapper to avoid circular dependencies.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 15:29:33 +02:00
Jo-Philipp Wich
575d386590 tools: make all tools depend on xz
Make all tools except tar (which is required to bootstrap xz-utils) and XZ
itself depend on XZ, in order to be able to handle .tar.xz downloads.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 14:12:46 +02:00
Jo-Philipp Wich
adb1566009 tools: tar: use .bz2 archive
The "tar" utility is required to bootstrap XZ which is required to handle
.tar.xz archives, therfore revert to using the bz2 archive.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 14:12:46 +02:00
Jo-Philipp Wich
e68c0a1325 tools: xz: use .bz2 archive
In order to build XZ itself we cannot assume that XZ support is available,
so fetch the bz2 archive variant of its sources instead.

Also drop the FreeBSD portability patch and apply it at prepare time using
sed, to avoid a dependency on GNU patch which in turn depends on XZ support.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 14:12:45 +02:00
Daniel Engberg
9edfe7dd13 source: Switch to xz for packages and tools where possible
* Change git packages to xz
* Update mirror checksums in packages where they are used
* Change a few source tarballs to xz if available upstream
* Remove unused lines in packages we're touching, requested by jow- and blogic
* We're relying more on xz-utils so add official mirror as primary source, master site as secondary.
* Add SHA256 checksums to multiple git tarball packages

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-10-06 12:16:56 +02:00
Hans Dedecker
34528c4807 dslite: Quote resolveip hostname argument
Quote resolveip hostname argument to avoid bad shell injections.
While at it fix pattern match logic in case multiple IPv6 addresses
are returned for a hostname as they're seperated by newline by
resolveip and not a white space

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-10-06 12:16:12 +02:00
Jo-Philipp Wich
7694c5cf0e include: remove XZ host prereq
We build XZ as part of tools/, so no need to require it to be available
on the host system.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 12:15:13 +02:00
Ben Whitten
6638946f99 at91: Remove u-boot from platform images folder
Removes the bootloader from the images section as its now in packages/boot
with the others.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-10-06 12:15:13 +02:00
Ben Whitten
6b31c4cb38 package: Add U-Boot for at91
Adds u-boot for the at91 platform and a couple of boards.
The build honours COPTS to benefit from fortify source et al.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-10-06 12:15:13 +02:00
Jo-Philipp Wich
eb75b6ac1f uhttpd: rename certificate defaults section
Now that the uhttpd init script can generate certificates using openssl as
well, update the section name and related comment to be more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-06 11:29:24 +02:00
Pavel Kubelun
9677bfbb0f ipq806x: fix wlan mac for Netgear R7800
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-10-06 08:01:33 +02:00
Matthias Schiffer
ec041920b7
include/package-ipkg.mk: use TARGET_PATH_PKG in Package/*/install steps
Package/*/install was using a different PATH than all other steps like
Build/Install, which was confusing and easily led to mistakes.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-06 01:57:39 +02:00
Matthias Schiffer
cb718eb34b
include/host-build.mk: set Host/Exports for Host/Install step
Having a different PATH in Host/Install than in other steps like Host/Build
is confusing and easily leads to mistakes. Setting all of Host/Exports
makes host builds match target builds (Build/Install is part of
$(STAMP_BUILT), which has Build/Exports set).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-06 00:51:34 +02:00
Matthias Schiffer
4ada2fd276
include/host-build.mk: fix ACLOCAL_INCLUDE
It seems the intention was to add both $(STAGING_DIR_HOST)/... and
$(STAGING_DIR)/host/... instead of passing $(STAGING_DIR_HOST) twice. This
makes the definition match HOST_CPPFLAGS and HOST_LDFLAGS.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-06 00:19:18 +02:00
Matthias Schiffer
7064a849ce
include/host-build.mk: pass HOST_BUILD_PREFIX to Host/install
Using HOST_BUILD_PREFIX instead of STAGING_DIR_HOST will make the argument
work as expected from packages.

Nothing changes for tools, for which HOST_BUILD_PREFIX and STAGING_DIR_HOST
are equivalent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-10-06 00:19:18 +02:00
Felix Fietkau
73c87a3cad hostapd: make -mesh and -p2p variants depend on the cfg80211 symbol
Avoids build failures when the nl80211 driver is disabled

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-05 23:02:13 +02:00
Mathias Kresin
116adaa3a4 lantiq: fixup last commits
Revert the rename of unrelated device tree nodes. Rename the missed
leds of the Speedport W 504V Typ A.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 20:26:35 +02:00
Koen Vandeputte
0f27096100 base-files: also generate configs when current is empty (FS#193)
Before a configuration is generated, an empty file is created to store
it in. (required by UCI)

If something happens during config generation
(power cut, interruption, ..) an empty file exists and it is never
regenerated again, causing some daemons to fail starting
(NTPD, logread, ..)

Fix this by also generating new configs if a critical file
is empty.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-10-05 19:59:11 +02:00
Mathias Kresin
7659f9ad9e lantiq: fix usb leds/trigger
Add USB led aliases to boards having an led which is meant to be used
as USB led according to the manuals.

Remove the kmod-ledtrig-usbdev from the default package selection for
boards not having an USB led. Add the kmod-ledtrig-usbdev to boards
where it is missing.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Mathias Kresin
e07c80dfc8 lantiq: use aliases device tree node for leds
The chosen node is clearly the wrong place for aliases.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Mathias Kresin
8b639410d1 lantiq: cleanup led handling functions
Use a more generic name for the lantiq_get_dt_led_chosen function.

Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led
function can be used to achieve the same.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Mathias Kresin
dbb13a81b9 lantiq: board.d: apply alphabetical order to led file
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00