Commit graph

2467 commits

Author SHA1 Message Date
John Crispin
47ab1cbf23 ar71xx: add support for TP-LINK CPE210/220/510/520
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43385
2014-11-26 08:59:32 +00:00
Imre Kaloz
15f6f67d18 Netgear R6100 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43382
2014-11-26 08:28:22 +00:00
Felix Fietkau
174d16e59f ar71xx: merge changes from 3.10 that were forgotten for 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43347
2014-11-23 16:27:19 +00:00
Felix Fietkau
25cb8318cd ar71xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43344
2014-11-23 13:54:28 +00:00
Felix Fietkau
0179456212 ar71xx: switch to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43343
2014-11-23 13:54:22 +00:00
John Crispin
f210f3811a ar71xx: Added support for D-link DHP-1565 rev. A1
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

SVN-Revision: 43307
2014-11-19 09:20:47 +00:00
John Crispin
6af2109a64 ar71xx: fix switch configuration in Ubiquiti UAP Pro
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43306
2014-11-19 09:20:18 +00:00
John Crispin
6fafcba63b ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43271
2014-11-14 16:58:29 +00:00
John Crispin
b6f5713b3f ar71xx: adjust MR900 profile for the OpenMesh MR900v2 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43270
2014-11-14 16:55:32 +00:00
John Crispin
52c267e2f7 ar71xx: add sysupgrade support for OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43267
2014-11-14 16:55:14 +00:00
John Crispin
104be9f803 ar71xx: add user-space support for OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43266
2014-11-14 16:55:04 +00:00
John Crispin
bc333d5399 ar71xx: add kernel support for the OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43265
2014-11-14 16:54:58 +00:00
John Crispin
305c1431e3 ar71xx: create profile and build image for the OpenMesh MR900 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43264
2014-11-14 16:54:50 +00:00
John Crispin
548822cd7a ar71xx: enable sysupgrade for the OpenMesh MR900
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43261
2014-11-14 16:54:28 +00:00
John Crispin
cfdaa8aefd ar71xx: add user-space support for the OpenMesh MR900 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43259
2014-11-14 16:54:15 +00:00
John Crispin
95544f33dd ar71xx: add kernel support for the OpenMesh MR900 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43258
2014-11-14 16:54:07 +00:00
Felix Fietkau
8acf9adf28 ar71xx: add missing WZR-450HP2 patch from r43026 for 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43175
2014-11-03 22:55:01 +00:00
John Crispin
2c72ffc154 ar71xx: add support for Netgear WNR2000v4
Signed-off-by: Michaël Burtin <mburtin@gmail.com>

SVN-Revision: 43173
2014-11-03 20:20:56 +00:00
Felix Fietkau
2eb6b059ba ar71xx: refresh 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43051
2014-10-24 20:39:42 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau
a1837135e0 ar71xx: add support for buffalo WZR-450HP2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43026
2014-10-22 11:02:18 +00:00
John Crispin
32acfefb6a ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42992
2014-10-20 06:29:58 +00:00
John Crispin
182d63bc40 ar71xx: add comments for Image/BuildLoader{, Alone}.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42990
2014-10-20 06:29:44 +00:00
Felix Fietkau
a7ee0142e7 ar71xx: disable irq on reboot to fix hang issues (fixes #17839)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42955
2014-10-18 19:25:30 +00:00
John Crispin
6e46fc8a38 wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL
This patch changes the code of the Wi-Fi On/Off button on the TP-Link WR1043ND v2
from KEY_WLAN to KEY_RFKILL (and renames a few constants to match). The reason
for this change is, that the KEY_WIFI button code is not recognized by the
hotplug subsystem. This means that the userspace is not notified about the
button being pressed which effectively renders it useless.

Signed-off-by: Josef Gajdusek <atx@atx.name>

SVN-Revision: 42922
2014-10-14 19:01:21 +00:00
John Crispin
70def60b04 ar71xx: fix seama factory type image generation.
Currently JFFS2 end-of-filesystem marker 0xdeadc0de is included the
computation of image's MD5 checksum as part of the seama header.  But
OpenWrt will erase blocks including and after the marker thus
invalidating the checksum after the first boot.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42915
2014-10-14 12:21:41 +00:00
John Crispin
24a0269b71 ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.
Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup.  OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry.  If such a region
is found, bootloader will try to increment imageNtrynum and boot it.

This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).

	root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
	00000000  9e f3 63 91 61 63 74 69  76 65 72 65 67 69 6f 6e  |..c.activeregion|
	00000010  3d 31 00 69 6d 61 67 65  31 73 74 61 74 75 73 3d  |=1.image1status=|
	00000020  30 00 69 6d 61 67 65 32  73 74 61 74 75 73 3d 30  |0.image2status=0|
	00000030  00 69 6d 61 67 65 32 74  72 79 6e 75 6d 3d 30 00  |.image2trynum=0.|
	00000040  69 6d 61 67 65 6d 61 78  74 72 79 3d 33 00 69 6d  |imagemaxtry=3.im|
	00000050  61 67 65 31 74 72 79 6e  75 6d 3d 30 00 00 00 00  |age1trynum=0....|
	00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42914
2014-10-14 12:21:36 +00:00
John Crispin
20940138ac scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
John Crispin
99c238ff15 ar71xx: Fix LED definitions for the DRAGINO2 board
This patch fixes LED definitions for the DRAGINO2 board.

1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 42897
2014-10-14 10:33:07 +00:00
John Crispin
e77ae183a1 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42797
2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1 ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42796
2014-10-06 04:53:25 +00:00
John Crispin
05777fb947 ar71xx: simplify TP-LINK model detection
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42795
2014-10-06 04:53:20 +00:00
John Crispin
73acd5050f ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)
Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 42792
2014-10-06 04:52:57 +00:00
John Crispin
491e028e2d ar71xx: add LED defaults for the EnGenius ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42786
2014-10-06 04:52:13 +00:00
John Crispin
e2c3c2280c ar71xx: fix reset button gpio for OM2P/OM2P-HS
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".

Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42782
2014-10-06 04:51:51 +00:00
Felix Fietkau
61f960071d ar71xx: revert accidental kernel upgrade
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42687
2014-09-27 20:54:12 +00:00
Felix Fietkau
3e833dcf90 ar71xx: add wmac callback for reading soc revision on ar934x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42685
2014-09-27 20:52:05 +00:00
Felix Fietkau
84d81d5844 ar71xx: refresh 3.14 kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42684
2014-09-27 20:51:49 +00:00
John Crispin
7dbbdfb61f ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.

This patch adds its initial support.

v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 42552
2014-09-15 10:19:38 +00:00
John Crispin
cb37fe5ca5 ar71xx: add board support for ubnt loco m xw
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42549
2014-09-15 10:19:14 +00:00
John Crispin
2c4c6d135b ar71xx: refactor ubnt xw board setup
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42548
2014-09-15 10:19:01 +00:00
Felix Fietkau
1961f8cdb7 ar71xx: ack completed tx descriptors only after the full frame has been completed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42457
2014-09-10 12:56:24 +00:00
Felix Fietkau
60b81acd60 ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable.  The existing code
however advertieses gigabit capability in the link status word.  If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link.  This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.

In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.

So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit.  This patch implements the
former solution.

Signed-off-by: Harald Welte <laforge@gnumonks.org>

SVN-Revision: 42432
2014-09-07 09:45:32 +00:00
Felix Fietkau
60eeadd0ba ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes (#13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42429
2014-09-06 17:51:48 +00:00
Felix Fietkau
2da2317fed ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42428
2014-09-06 17:51:44 +00:00
Felix Fietkau
05dd36a980 ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 (improves performance) (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42427
2014-09-06 17:51:39 +00:00
Felix Fietkau
926f000b99 ar71xx: disable ethernet descriptor splitting for now, as it seems to cause tx hangs in some setups
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42333
2014-08-30 09:11:41 +00:00
Felix Fietkau
4ff324191f ar71xx: select m25p80 support instead of spi support where used by mach files (#17699)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42331
2014-08-29 21:10:39 +00:00
Felix Fietkau
2c680151e4 ar71xx: split packets into multiple descriptors on ar716x
This improves performance when doing concurrent rx/tx on a single
ethernet MAC, e.g. when routing between VLANs.

Fixes #13072

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42328
2014-08-29 19:42:08 +00:00
John Crispin
254b2670e1 ar71xx: add Support for RB2011UiAS-2HnD
SVN-Revision: 42317
2014-08-28 06:27:45 +00:00