Commit graph

9501 commits

Author SHA1 Message Date
Hauke Mehrtens
721bf97863 kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
These attributes where removed with kernel 3.8 and are now causing compile errors.

SVN-Revision: 35328
2013-01-27 17:48:48 +00:00
Felix Fietkau
ed7ca5d44e kernel: clean up crypto related kconfig options
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Felix Fietkau
8a1091ad53 ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma
SVN-Revision: 35326
2013-01-27 16:38:27 +00:00
Felix Fietkau
044c316167 kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
Reduces kernel size after LZMA by about 5k on MIPS

SVN-Revision: 35325
2013-01-27 16:21:08 +00:00
Hauke Mehrtens
e083c7926b brcm47xx: create image for Netgear WNDR3400 V1
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
Hauke Mehrtens
05623aebef brcm47xx: add initial board detection code
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
Hauke Mehrtens
a83d7bb109 brcm47xx: add gpio to irq function again
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
Felix Fietkau
8933b918cd kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
in combination with kernel symbol export stripping this significantly reduces
the kernel image size

SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Florian Fainelli
680f460861 kernel: refresh 3.8 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35317
2013-01-24 17:04:52 +00:00
Florian Fainelli
9781461a3d mvebu: update to 3.8-rc4
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35316
2013-01-24 17:04:46 +00:00
Hauke Mehrtens
4a69e20a10 kernel: add missing config options for 3.8
SVN-Revision: 35315
2013-01-24 14:48:15 +00:00
Hauke Mehrtens
76c12ff797 brcm47xx: change generic profiles
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
Felix Fietkau
b60fc82ce5 kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
SVN-Revision: 35310
2013-01-23 16:31:38 +00:00
Felix Fietkau
8ce8960959 ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
Jonas Gorski
8411e5c06e bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
Jonas Gorski
17d51121a6 bcm63xx: expose the internal switch to b53
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Jonas Gorski
bb0118c66f generic: add b53 swconfig switch driver
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
Jonas Gorski
3e998d9cf9 bcm63xx: move bcm63xx-spi into the kernel
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
Felix Fietkau
46e4246d61 kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore
SVN-Revision: 35248
2013-01-19 19:14:37 +00:00
Gabor Juhos
ed6d399f8d ramips: add profile and build image for the Tenda 3G300M
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
Gabor Juhos
9891603eb5 ramips: add user-space support for the Tenda 3G300M
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
Gabor Juhos
7eff5d2df0 ramips: add kernel support for the Tenda 3G300M
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
Gabor Juhos
f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
Gabor Juhos
6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
Gabor Juhos
60dde219d4 ramips: do not stop the build if some targets fail
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
2013-01-19 08:51:45 +00:00
Jonas Gorski
c3eeff807f generic: rtl8366_smi: only assign pvid if no pvid was set yet
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged
and untagged traffic on a port and the untagged vlan isn't the last one
of which the port is a member.

Tested on RTL8366S and RTL8367R.

Fixes #8501.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35227
2013-01-18 15:19:11 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Florian Fainelli
c8215775f3 mvebu: enable PCI in kernel configuration
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35214
2013-01-17 22:29:26 +00:00
Florian Fainelli
5e45a4344c mvebu: enable PCIe on Marvell Armada 370 Reference Design
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35213
2013-01-17 22:29:22 +00:00
Florian Fainelli
cf9343ac86 mvebu: enable USB on Armada 370 Reference Design
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35212
2013-01-17 22:29:18 +00:00
Florian Fainelli
7e1e7063c2 mvebu: add preliminary support for PCI express
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35211
2013-01-17 22:29:13 +00:00
Florian Fainelli
29c21b973b mvebu: refresh patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35210
2013-01-17 22:28:58 +00:00
Florian Fainelli
28acc6588d kernel: refresh 3.8 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35209
2013-01-17 22:28:53 +00:00
Florian Fainelli
a286a55c6f mvebu: add board detection scripts
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35208
2013-01-17 22:28:48 +00:00
Florian Fainelli
f7858466e2 mvebu: enable /proc/devicetree usage
This is going to be used for proper user-space board identification (ala
mcs814x).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35207
2013-01-17 22:28:37 +00:00
Florian Fainelli
15b4681e3e mvebu: add default profile
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC,
SDIO)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35206
2013-01-17 22:28:33 +00:00
Jo-Philipp Wich
7399df1d69 x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821)
SVN-Revision: 35200
2013-01-17 15:46:26 +00:00
Gabor Juhos
57f7408b8a generic: add EHCI|OHCI platform driver fix to 3.[36]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35194
2013-01-17 13:54:14 +00:00
Felix Fietkau
576aa2af0c ramips: enable BR6425N in kernel config
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
2013-01-17 09:39:44 +00:00
Florian Fainelli
05466923b8 mvebu: add support for EHCI controller
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35181
2013-01-15 19:55:50 +00:00
Florian Fainelli
c53a347034 mvebu: add support for the Marvell Armada 370 Reference Design board
Keep the patches in sync with the upstream developments.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35179
2013-01-15 19:55:40 +00:00
Florian Fainelli
58f8c5d87a mvebu: enable SMP with SMP on UP enabled
The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35178
2013-01-15 19:55:31 +00:00
Florian Fainelli
fa1afc1fa9 mvebu: add support for RTC
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35176
2013-01-15 19:55:19 +00:00
Felix Fietkau
b3b04e9fb1 kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8
SVN-Revision: 35162
2013-01-14 18:55:36 +00:00
Gabor Juhos
78dc69e1d4 generic: remove EHCI platform driver fix from 3.8
It is not needed on 3.8.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35160
2013-01-14 17:53:55 +00:00
Gabor Juhos
b035c594ae generic: add EHCI|OHCI platform driver fix from the cns21xx target
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35159
2013-01-14 17:47:23 +00:00
Florian Fainelli
1e103b2ecc target: enable XZ BCJ decompressor code after r35097
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
2013-01-14 16:34:25 +00:00
Felix Fietkau
e0e3509b5c kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
SVN-Revision: 35154
2013-01-14 16:08:18 +00:00