Commit graph

156 commits

Author SHA1 Message Date
Felix Fietkau
9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
John Crispin
5f51cfcf55 imx6: make the default config bootable on ventana
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43369
2014-11-24 19:12:19 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Luka Perkov
9ccacbaa40 imx6: fix image build for Generic profile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42455
2014-09-09 21:15:49 +00:00
Luka Perkov
20f48d27ea imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42297
2014-08-25 21:50:49 +00:00
Luka Perkov
eb75d320d1 imx6: kernel: backport upstream fix for IMX6DL 800MHz speed grade
A previous backported patch that adds freq/voltage operating points for the
IMX6DL processor can cause hang/crash (general instability) on IMX6DL
processors in the industrial/automative speed grades as they don't support
1GHz operation.

This adds another backported patch from mainline that uses IMX6 fuse settings
to properly remove invalid operating points for the particular CPU grade used.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42294
2014-08-25 21:50:43 +00:00
Luka Perkov
24696a06ad imx6: update kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42149
2014-08-11 20:35:15 +00:00
Luka Perkov
fa8e8d262e imx6: kernel: add GW5520 support
The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42148
2014-08-11 20:35:13 +00:00
Luka Perkov
dcacd65281 imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support
The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
 * 7-port Ethernet Switch
  * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
  * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)

This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42147
2014-08-11 20:35:10 +00:00
Luka Perkov
9d826428b7 imx6: kernel: add GW16082 miniPCI Expansion Mezzanine support
The GW16082 miniPCI Expansion Mezzanine has the INTA/B/C/D IRQ's reversed
from the PCI standard. This will soon be resolved in the bootloader via
devicetree, but in the meantime this will work around the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42146
2014-08-11 20:35:06 +00:00
Luka Perkov
e47c4d7014 imx6: kernel: fix occasional link failure
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42145
2014-08-11 20:35:04 +00:00
Luka Perkov
fe5d39d66c imx6: kernel: backport an upstream pci hang fix
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42144
2014-08-11 20:35:02 +00:00
Luka Perkov
97f26cad16 imx6: update upstream patch
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42081
2014-08-08 16:11:57 +00:00
Luka Perkov
c84876702b imx6: drop 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42075
2014-08-08 13:38:31 +00:00
Luka Perkov
4c2c390a23 imx6: switch to 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42074
2014-08-08 13:38:30 +00:00
Luka Perkov
60fe58100c imx6: update upstream patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42073
2014-08-08 13:38:29 +00:00
Luka Perkov
d5f94a4122 imx6: backport IMX6DL DVFS support from 3.15
This allows dynamic voltage and frequency scaling to work for IMX6DL CPU's.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42072
2014-08-08 13:38:27 +00:00
Luka Perkov
2b6d364a2d imx6: drop ventana kernel/rootfs hack
In r41578 this was added in order to make default images bootable for the BB
release. We need more generic approach for this.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42071
2014-08-08 13:38:25 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Gabor Juhos
d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
2014-07-13 16:25:54 +00:00
John Crispin
f88fde9689 imx6: put kernel and dtb into rootfs by default
this will make the rc1 images boot with the default config.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41578
2014-07-10 22:02:24 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Luka Perkov
fa0b9bccea imx6: move imx6.sh to /lib/ for consistency
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41339
2014-06-26 10:14:13 +00:00
John Crispin
cf80a59dcc imx6: add sysupgrade support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41277
2014-06-19 14:13:38 +00:00
John Crispin
1a60486acb imx6: the script populating /tmp/sysinfo/ was in the wrong path
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41276
2014-06-19 14:13:34 +00:00
Florian Fainelli
43c0ad0f00 imx6: fix typo on wandboard detection
Revision r41256 introduced a typo (wandaboard => wandboard), but later
revisions expect to match on "wandboard"

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 41262
2014-06-18 16:34:23 +00:00
John Crispin
efcec0faaf imx6: use /lib/imx6.sh inside the uci-defaults script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41257
2014-06-18 10:08:16 +00:00
John Crispin
2773bdfebf imx6: add a script to detect the board name and populate /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41256
2014-06-18 10:08:12 +00:00
John Crispin
e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin
ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
2014-06-11 12:59:22 +00:00
Luka Perkov
284a07f748 imx6: kernel: update 3.14 pcie patches
Remove old irq map patch and replace it with the propper upstream patches
allowing IMX6 PCIe devices behind PCIe switches to work properly.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 41004
2014-06-04 23:01:30 +00:00
Luka Perkov
cdd9e952e5 imx6: ventana: remove non-trunk packages from defaults
The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40991
2014-06-02 21:23:36 +00:00
Luka Perkov
be7396bad7 imx6: ventana: add default kernel modules
Add the following kernel modules by default (which are present on most Ventana
baseboards):
 - kmod-leds-gpio (user leds)
 - kmod-sound-core (required as a dependency of the other sound modules)
 - kmod-pps-gpio (Pulse-Per-Second)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40990
2014-06-02 21:23:35 +00:00
Luka Perkov
f637a1e562 imx6: update board names per device-tree updates
The Gateworks Ventana board names have been adjusted per upstream patches
to include all IMX6 SoC variants.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40989
2014-06-02 21:23:34 +00:00
Luka Perkov
b87016722c imx6: update 3.14 ventana dts with upstream fixes
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common and
   not baseboard specific.
 - removed obsolete crts
 - fix include typo: The imx6q-gw51xx needs to include imx6qdl-gw51xx.dtsi
 - fix gw52xx clock for sgtl5000 ananlog audio codec
 - fix LVDS mapping for Ventana GW52xx/GW53xx/GW54xx
 - add LVDS backlight for Ventana
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40988
2014-06-02 21:23:32 +00:00
Luka Perkov
f689e3cf8b imx6: update 3.10 ventana dts
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common an
   not baseboard specific.
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40987
2014-06-02 21:23:29 +00:00
Luka Perkov
e37e0f17ed imx6: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 40758
2014-05-13 21:56:05 +00:00
Luka Perkov
dce36465ad imx6: drop support for 3.13
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40754
2014-05-12 12:29:22 +00:00
Luka Perkov
aa3d844d34 imx6: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40753
2014-05-12 12:29:19 +00:00
Luka Perkov
b58e65f2ee imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40531
2014-04-19 21:39:04 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Luka Perkov
f7f117b88d imx6: optimize for NEON FPU hardware
The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware
blocks.  This will tune gcc to use neon instead of vfpv3 which will outperform
VFPv3.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39760
2014-02-27 22:41:40 +00:00
Luka Perkov
6752d4cb08 imx6: enable FPU for hard float
The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which
in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration.
As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu
to the feature list.  This will default the IMX6 target to use -mfloat-abi=hard
which will the be most efficient use of floating point.

When switching to hard float, we also need to enable VFP support in the kernel.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39759
2014-02-27 22:41:39 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Luka Perkov
223c6808ba imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39644
2014-02-20 17:26:10 +00:00
Luka Perkov
a52100469f imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39643
2014-02-20 17:26:08 +00:00