Commit graph

32678 commits

Author SHA1 Message Date
Felix Fietkau
42a3d7811f mac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers in hostapd makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46903
2015-09-14 06:51:10 +00:00
Felix Fietkau
714f7080cf ath10k: reduce dma burst size on newer firmware to fix crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46900
2015-09-13 20:44:09 +00:00
Steven Barth
d1f6bd2541 toplevel: fix release name
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46899
2015-09-13 18:02:54 +00:00
Felix Fietkau
0c2f21d303 Revert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)
SVN-Revision: 46898
2015-09-13 17:39:24 +00:00
Felix Fietkau
ed1e87ae2e gcc: fix path to powerpc musl dynamic linker with 5.2 (#20501)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46897
2015-09-13 17:38:55 +00:00
Felix Fietkau
5dd5a2990e musl: fix termios struct c_ispeed/c_ospeed field names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46896
2015-09-13 17:38:49 +00:00
Felix Fietkau
923dbc57cd ath10k: make title for the old firmware config option more meaningful
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46895
2015-09-13 17:38:42 +00:00
Zoltan Herpai
cd73603269 packages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.
This should fix a issue reported in ticket #20387.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 46894
2015-09-13 15:11:27 +00:00
Hauke Mehrtens
e1ec8b76e9 ar71xx: fix build of lzma-loader with binutils 2.25.1
To make the lzma-loader build with binutils 2.25.1 it is needed to
remove the .MIPS.abiflags section otherwise I get the following compile
error:

mips-openwrt-linux-musl-objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S loader loader.bin
mips-openwrt-linux-musl-objcopy: Warning: Writing section `.text' to huge (ie negative) file offset 0xffffffff80a00000.
mips-openwrt-linux-musl-objcopy:loader.bin[.text]: File truncated

This should close #20487.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46893
2015-09-12 18:57:37 +00:00
Hauke Mehrtens
41f9b5e42e bcm53xx: add NAND flash chip description for Asus RT-AC87U
This should fix #20492.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46892
2015-09-12 11:10:34 +00:00
Felix Fietkau
1956cc7018 ramips: enable external amplifier for Xiaomi MiWiFi Mini
Attempt to boost the 2.4 GHz signal, currently very low.

Signed-off-by: D. Andrei Măceș <dmaces@nd.edu>

SVN-Revision: 46891
2015-09-12 10:22:41 +00:00
Felix Fietkau
796a2d032b base-files: fix typo in core dump pattern sysctl entry (fixes #20489)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46890
2015-09-12 08:57:59 +00:00
Rafał Miłecki
450aebcdce bcm53xx: reorder some arch patches
This moves arch patches affecting many DTS files. Thanks to this change
we can put some ready-to-mainline patches at 300-319 and simplify
backporting process.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46889
2015-09-11 22:36:05 +00:00
Hauke Mehrtens
1d05e2962f wpan-tools: bump to wpan-tools-0.5
Signed-off-by: Varka Bhadram <varkabhadram@gmail.com>

SVN-Revision: 46888
2015-09-11 20:52:35 +00:00
Hauke Mehrtens
eff877ee8c mac80211: use wl18xx-fw-4.bin
The driver only supports wl18xx-fw-4.bin and does not support the old
firmware wl18xx-fw-3.bin and more.

The wl18xx-conf.bin file was removed upstream it does not fit all
devices any more, see this on how to generate one:
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf

If someone has a config file for the common platforms with the wifi nic
OpenWrt uses please send a patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46887
2015-09-11 20:37:47 +00:00
Hauke Mehrtens
f6a7c5bbc3 mac80211: add iwlagn debug options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46886
2015-09-11 20:37:23 +00:00
Hauke Mehrtens
f0916201d0 mac80211: refresh Intel firmware
- sort firmware
- add newer firmware for Intel chipsets
- newer Intel MVM require firmware

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46885
2015-09-11 20:36:35 +00:00
Hauke Mehrtens
46137217c2 mac80211: iwlagn: enable iwlmvm
- reported in forums
- Intel 7260 and 3160 need IWLMVM drivers/firmware

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46884
2015-09-11 20:36:11 +00:00
Hauke Mehrtens
688f1c905d mac80211: update linux-firmware to 2014-09-03
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[update to 2014-09-03 and change to xz]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46883
2015-09-11 20:35:11 +00:00
Hauke Mehrtens
ad931fe512 mac80211: rt2800-usb: enable "unknown" USB IDs
- should fix issue: https://forum.openwrt.org/viewtopic.php?id=57315
- enable support of more USB stick with rt28xx chipsets
- experimental: USB-IDs not in vendor linux driver
- experimental: "exact chipset is unknown"
- experimental: "enabling these devices may or may not work"

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46882
2015-09-11 20:31:58 +00:00
Hauke Mehrtens
89ce027c08 kernel: add CONFIG_MIPS_CDMM config option
This driver was added in kernel 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46881
2015-09-11 20:31:32 +00:00
Rafał Miłecki
c6e30d6d7a brcm47xx: detect Netgear R6300 V1 & support reset button
It's still far from complete support.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46880
2015-09-11 20:00:02 +00:00
Hauke Mehrtens
4b1278e43e kernel: Added missing symbols into 4.1 & 4.0 kernel default .config
As requested here #20432 I've
tried to fix the missing symbols from the specified default kernel
config files.
I ran into this problem trying to build an image for x86_64 target
with a custom kernel configuration.

Signed-off-by: Manganini Mirko <mmanganini@gmail.com>

SVN-Revision: 46879
2015-09-11 19:02:53 +00:00
Hauke Mehrtens
5b04888848 brcm47xx: update to kernel 4.1
This makes bcm53xx use kernel 4.1 by default now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46878
2015-09-11 18:52:42 +00:00
Hauke Mehrtens
b075d5e734 bcm53xx: update to kernel 4.1
This makes bcm53xx use kernel 4.1 by default now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46877
2015-09-11 18:52:18 +00:00
Felix Fietkau
caddbf5431 tools: add tar host build, required for --sort=name which was only added in the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46876
2015-09-11 18:38:02 +00:00
Hauke Mehrtens
accc5e3693 script: downlaod: change mirror for kernel.org
kernel.org now suggests a different mirror address. this one also
support IPv6 connections and was faster for me.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46875
2015-09-11 17:59:12 +00:00
Hauke Mehrtens
98e00f8fdd binutils: add binutils 2.25.1
This adds binutils 2.25.1 as an option to OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46874
2015-09-11 17:58:39 +00:00
Hauke Mehrtens
0fdb4a458b gcc: update gcc 5.x musl patches
This replaces the musl patches for gcc with the versions which are in
gcc trunk.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46873
2015-09-11 17:57:39 +00:00
Hauke Mehrtens
5caee877dc brcm47xx: increase max image size
the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46872
2015-09-11 17:55:28 +00:00
Hauke Mehrtens
c9bebfb9ce brcm47xx: break long lines in image Makefile
This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46871
2015-09-11 17:54:55 +00:00
Felix Fietkau
e1f0a7e841 brcm2708: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46870
2015-09-11 17:17:30 +00:00
Felix Fietkau
6c1adb3eec lantiq: Use the BAR0 base address in the ath PCI fixup code
Fixes support for AR9287 on TP-Link TD-W8980 and possibly other devices
which have an ath wifi chip at a PCI address other than 0xb8000000
(TD-W8980 for example has it's wifi chip at 0xbc000000).

Signed-off-by: Geoffrey McRae <geoff@spacevs.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46869
2015-09-11 16:35:46 +00:00
Felix Fietkau
9da3a62839 ugps: fix filename to eliminate build problems
due to ordering PKG_SOURCE_VERSION is not defined leading
to a filename "ugps-.tar.bz2"
This errors out when an older version is in the dl/ dir (or LOCALMIRROR)

fix order and use uhttpd file naming scheme to visibly include date

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46868
2015-09-11 16:35:32 +00:00
Felix Fietkau
ced2b641e2 base-files: set kernel.core_pattern in sysctl.conf
Move the pattern setting from netifd's service script to
/etc/sysctl.conf.  Put the timestamp component '%t' just after
executable name '%e' for more natural order from output of ls command.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 46867
2015-09-11 16:35:17 +00:00
Felix Fietkau
9b3b58b380 util-linux: add prlimit command.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 46866
2015-09-11 16:35:02 +00:00
Felix Fietkau
18c01061a9 mvsw61xx: match swconfig function names
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 46865
2015-09-11 16:34:49 +00:00
Felix Fietkau
b75d188b21 mvsw61xx: use standard swconfig get_port_link
The previous "link" and "status" functions were non-standard,
and thus less useful for parsing.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 46864
2015-09-11 16:34:35 +00:00
Felix Fietkau
1a2fd4f869 ipkg-build: add ogargs to outer tar/ipk
prevent name:uid leaks of build system

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46863
2015-09-11 16:34:22 +00:00
Felix Fietkau
542ee6ed19 ar71xx: Restore buildability of the AP121 target
Increase space for kernel and also introduce a 8M flash target into the
Makefile.

Signed-off-by: Attila Lendvai <attila@lendvai.name>

SVN-Revision: 46862
2015-09-11 16:34:08 +00:00
Felix Fietkau
9abc02479e hostapd: Add eapol_version config option
Add eapol_version to the openwrt wireless config ssid section.
Only eapol_version=1 and 2 will get passed to hostapd, the default
in hostapd is 2.

This is only useful for really old client devices that don't
accept eapol_version=2.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 46861
2015-09-11 16:33:54 +00:00
Felix Fietkau
beabe8af46 openvpn: remove __DATE__ from options output
reported by:
https://reproducible.debian.net/openwrt/dbd/ar71xx/base/openvpn-nossl_2.3.7-1_ar71xx.ipk.html

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46860
2015-09-11 16:33:39 +00:00
Felix Fietkau
4baec2468a include/image.mk: make tar reproducible
several packages reported different file order between builds
make binutils, kmod-sched reproducible

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46859
2015-09-11 16:33:26 +00:00
Felix Fietkau
e6fb730daa yaffs2: remove __TIME__ __DATE__ macros
prevent compiler errors with gcc 4.9
increase reproducibility

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46858
2015-09-11 16:33:12 +00:00
Felix Fietkau
d9857f5468 ramips: Enable RTC support for PBR-M1
The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The
PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself
will not be build because CONFIG_RTC_CLASS is currently not enabled for its
kernel.

Enabling this option should fix the problem of the missing rtc device on
these boards.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46857
2015-09-11 16:32:58 +00:00
Felix Fietkau
bc4f2c5ce4 ar71xx: fix ar724x clock calculation
According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.

The correct CPU PLL calculation procedure is as follows:
CPU_PLL = (DIV * REF_CLK) / REF_DIV / 2.

This patch is compatible with the current calculation procedure with default
DIV and REF_DIV values.

Test on both AR7240, AR7241 and AR7242.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 46856
2015-09-11 16:32:45 +00:00
Felix Fietkau
b7933a47bb brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46855
2015-09-11 16:32:28 +00:00
Felix Fietkau
b1be597a7a brcm2708: add kmod-sound-soc-raspidac3
This adds support for RaspiDAC Rev.3x

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46854
2015-09-11 16:32:15 +00:00
Felix Fietkau
0b5d87fd30 brcm2708: update 4.1 patches
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46853
2015-09-11 16:32:00 +00:00
Felix Fietkau
2ce833060a target: ar71xx: add support for COMFAST CF-E316N v2 board
This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 46852
2015-09-11 16:31:35 +00:00