Use shared libipt{,4,6}ext.so libraries instead of statically linking
the userspace matches into the fw3 executable.
As a side effect the match initialization is extremely simplified
compared to the weak function pointer juggling performed before.
This also fixes the initialization of the multiport match.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45764
Update kernel sources and refresh some patches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45761
This is required to allow packages to ship libraries with a different API.
Previously the linker would favor the old shared libraries in STAGING_DIR
instead of the just compiled ones in PKG_BUILD_DIR.
Avoid that problem by clearing the package staging files right after
prepare.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45759
* drop unused lenient restore patch
* instead of statically linking core extensions, build shared libraries
for reuse in fw3
* strip outdated match revisions and aliases to trim down library size
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45758
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.
This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 45749
Fix an upstream regression on 3.18+ that causes rt305x based devices
to hang on boot.
Fixes#19715.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45747
Output warnings through stderr to allow them to be easilier spotted
when building with V=w.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45746
Hello,
if you run:
./scripts/feeds clean
It removes ./feeds folder but not ./package/feeds/ which is full of dangling links then. This patch fixes it.
Best Regards,
Martin Strbačka
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
SVN-Revision: 45738
Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean
Openwrt's top level Makefile uses STAGING_DIR_TOOLCHAIN in the make dirclean
statement.
https://dev.openwrt.org/browser/trunk/Makefile#L55
rm -rf $(STAGING_DIR) $(STAGING_DIR_HOST) $(STAGING_DIR_TOOLCHAIN)
$(TOOLCHAIN_DIR) $(BUILD_DIR_HOST) $(BUILD_DIR_TOOLCHAIN)
As far as I can determine, no such variable has been defined. I made a search
in Openwrt source repository and the one line in Makefile's dirclean command
is the only place where that variable exists.
The item has been introduced to Makefile by r8362, but even at that time
neither Makefile nor rules.mk defined such a variable. Most likely the goal
has been to set both staging_dir/toolchain and build_dir/toolchain to be
cleaned, but one of the variables has been erroneous. The correct variable
for build_dir/toolchain has been then added by r13494.
References:
https://dev.openwrt.org/changeset/8362/https://dev.openwrt.org/browser/trunk/Makefile?rev=8362https://dev.openwrt.org/browser/trunk/rules.mk?rev=8362https://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.htmlhttps://dev.openwrt.org/changeset/13494
In current code,
TOOLCHAIN_DIR = $(TOPDIR)/staging_dir/$(TOOLCHAIN_DIR_NAME)
BUILD_DIR_TOOLCHAIN = $(TOPDIR)/build_dir/$(TOOLCHAIN_DIR_NAME)
so the item STAGING_DIR_TOOLCHAIN in the rm command is unnecessary.
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45736
modules relating to CONFIG_USB_AUDIO
Kernel <2.6.35 is not supported in trunk
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45734
Patches are cherry-picked from linux-next. We're also adding the
corresponding config option to the kernel.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45729
Patch cherry-picked from the following location:
https://chromium-review.googlesource.com/#/c/269931/
Disable the i2c device on gsbi4 and mark gsbi4_h and gsbi4_qup clks as
unused. If they are enabled, clock framework will turn them off at end
of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4
are meant for RPM usage. So turning them off in kernel is incorrect.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45728
This patch is to add support for the Meraki MR12 and MR16 Access Points.
Currently everything is working, minus the 2nd NIC interface on the MR12
which is built into the SoC.
Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>
SVN-Revision: 45726
The diag.sh script lacked an entry for the status led on the RT-N14U,
map it to the asus:blue:power led which is also used by the boot loader
to report boot status (eg. TFTP recovery mode VS normal boot)
Signed-off-by: Matteo Panella <m.panella@level28.org>
SVN-Revision: 45725
MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB
and 1 ethernet port. The original product information can be found at:
http://www.aximcom.com/en/MR-102N
Signed-off-by: Tai-hwa Liang <atliang@gmail.com>
SVN-Revision: 45724
This patch adds support for Comfast CF-WR800N, a wall-plug wireless router
based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45722
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45720
There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in
ifxmips_pcie.c. Instead of defining a new hook we simply re-use the
existing ones (this is basically what the lantiq BSP code does).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45718
The PCIe bus seems to require a hack/workaround when PCI is enabled as
well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is
only defined in lantiq's BSP code. The config symbol for the upstream
lantiq PCI driver is CONFIG_PCI_LANTIQ.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45717
There is also a OHCI controller, activate it for USB 1.1 support.
This should close#19601.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45716
