Commit graph

1966 commits

Author SHA1 Message Date
Matthias Schiffer
593dfac909
image: per-device rootfs: first remove, then install packages
Some DEVICE_PACKAGES definitions replace one package variant with another
(e.g. wpad-mini is replaced with wpad). To avoid file conflicts, first
remove, then install packages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-26 17:57:58 +02:00
Matthias Schiffer
a16a8814ea
image: don't modify file permissions before rootfs generation
Modifying the file permissions can be harmful, as it would make files
world-readable even if they weren't in the ipk packages. The
Image/mkfs/prepare step is removed completely, as it is redundant now (/tmp
and /overlay are already provided by base-files with the correct
permissions).

It has been verified that this change does not affect any permissions of
files in the default package set except /etc/ppp/chap-secrets, which was
world-readable before. All packages not in the default set are more likely
to be installed via opkg than being part of a base image and thus were
usually not affected by the permission modification anyways.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-26 17:57:56 +02:00
Matthias Schiffer
663145e419
image: fix CONFIG_CLEAN_IPKG with CONFIG_TARGET_PER_DEVICE_ROOTFS
Running prepare_rootfs on TARGET_DIR deletes the opkg state when
CONFIG_CLEAN_IPKG is enabled, making the per-device rootfs package install
fail.

To avoid this, create a copy of the TARGET_DIR before prepare_rootfs is run
and use this as basis for per-device rootfs generation.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-25 09:30:55 +02:00
Matthias Schiffer
3675e657ed
image: per-device rootfs: don't fail without opkg
Ignore errors caused by /etc/opkg not existing (i.e. when opkg is not
selected).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-24 18:41:37 +02:00
Matthias Schiffer
e916579340
image: allow specifying additional packages for device-specific rootfs
Add a new option to each device in multi-profile mode, allowing to provide
a list of packages to add or remove. In case of added packages, the user
must take care that these are selected to be built.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-24 18:25:25 +02:00
Matthias Schiffer
c15d70c6d6
image: don't override opkg list directory in per-device rootfs mode
opkg's -l option is always interpreted relative to the installation root.
This leads to very weird paths inside the rootfs (containing the whole path
to the LEDE tree on the build machine) and causes the subsequent deletion
of the list directory to fail (cluttering the resulting images).

Instead, use the default list directory and remove its contents in
prepare_rootfs.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-24 03:37:08 +02:00
Álvaro Fernández Rojas
41eab9048b kernel: update kernel 4.4 to version 4.4.21
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-16 10:17:27 +02:00
Álvaro Fernández Rojas
d14c28fc80 kernel: update kernel 4.4 to version 4.4.20
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 08:10:55 +02:00
Mathias Kresin
61c2a7339a image: remove padding parameter from append-kernel/append-rootfs
Using pad-to instead of passing the optional padding to append-kernel
or append-rootfs. It could be that the value of a variable is passed.
In case the variable is empty no error is thrown.

Furthermore the purpose of the extra parameter is hard to get without
reading the code.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-13 19:36:41 +02:00
Mathias Kresin
14b40d61e1 image: use check-size from new image build code
Use the new image build code and deduplicate the code.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-13 19:36:41 +02:00
Mathias Kresin
1cd0a4c688 image: add KERNEL_SIZE to the default device vars
This reverts commit ec37a56587 and fixes
the underlying issue.
2016-09-13 19:36:41 +02:00
Felix Fietkau
d27bce8d28 build: drop UBI EOF marker from images by default
Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-12 18:21:52 +02:00
Felix Fietkau
d2a7df0792 octeon: use new ext4/f2fs overlay support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Mathias Kresin
ddd259b0d5 image: pass device blocksize to padjffs2
At the moment the padding steps are hardcoded. Especially images for
devices with a 4K sector size can be unnecessarily bloated using the
hardcoded padding steps.

It has been observed that 192Kb of padding was added to the image of a
4MB device, albeit due to the 4K sector size the minimum required extra
padding for the jffs2 rootfs_data is 20Kb.

In worst case it means that the image-size check could fail albeit
there is enough space for all selected packages

For device build code not exposing the blocksize, use the hardcoded
padding further on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:40:15 +02:00
Mathias Kresin
3e7524c184 image: add support for k unit suffix to append-ubi
Allows to use the same unit for all definitions of the blocksize to be
consistent regardless of the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:51:58 +02:00
Mathias Kresin
b99a93ebaf image: add support for k unit suffix to pad-offset
Allows to specificy the padding and offset in kilobytes to be
consistent with pad-to.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:36:12 +02:00
Pushpal Sidhu
4fd043b95b image.mk: Create a manifest file of installed packages as a build artifact
A few linux BSP's create a manifest file of installed packages for a given
target in order to help them understand exactly what's on their images. Create
one here as well as a build artifact since many users have an affinity to
prune down on packages to save valuable flash space.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 13:40:02 +02:00
Felix Fietkau
a84a74f618 scripts/ubinize-image.sh: add support for adding custom partitions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-31 13:05:19 +02:00
Felix Fietkau
223c124db8 ubox: move logd into ubox package
Preparation for further build rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-23 12:19:23 +02:00
Felix Fietkau
f5860f898a build: use perl instead of GNU date for KBUILD_BUILD_TIMESTAMP
Fixes warning on non-Linux systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-23 11:56:13 +02:00
Felix Fietkau
4170267f5a build: pass $(STAGING_DIR_HOST) to Host/Install
makes it more consistent with package builds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-23 11:56:13 +02:00
Jonas Gorski
b962da4d92 ramips: mt7621: switch to 24kc
1004kc is just a SMP capable 34kc, and GCC treats 24kc and 34kc exactly
the same and will generate identical code, so there is no need to tune
to 1004kc instead of 24kc.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-23 11:55:32 +02:00
Jonas Gorski
a11843b62e include: remove 34k distinction
Now that there are no users anymore, drop the 34kc CPU_FLAGS.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-23 11:55:32 +02:00
Stijn Tintel
8072264b96 kernel: update kernel 4.4 to version 4.4.19
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-23 10:51:17 +03:00
Jonas Gorski
f3923dab7b kernel: check the right directories for rebuild
Pass KERNEL_FILE_DEPENDS to rdep instead of PKG_FILE_DEPENDS, which is
empty. Also don't pass $(CURDIR) as the directory to timestamp, as it
would also pick up non kernel related changes like image building code.

Should fix kernel being rebuild for unrelated changes, as well as not
being rebuild for changes in target/linux/generic.

Fixes: 22ef1c83b3 ("kernel: make the kernel build auto-clean the build dir like package build")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-19 11:02:47 +02:00
Josua Mayer
57ef81d78f kernel: prevent adding custom string to localversion
When the kernel build picks up a localversion file in the source tree,
that string is unconditionally appended to LOCALVERSION and affects the
uname string.
Make sure to delete any such file.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2016-08-18 09:49:18 +02:00
Josua Mayer
0df2c6563a kernel: prevent addition of scm marker to localversion
When building the kernel from a git repository, the kernel build appends
either a + or a short commit hash to localversion.
This behaviour can be prevented by passing the empty LOCALVERSION variable
to make.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2016-08-18 09:49:18 +02:00
Jonas Gorski
86ec410418 kernel: check SOURCE_DATE_EPOCH before setting KBUILD_BUILD_TIMESTAMP
Make sure SOURCE_DATE_EPOCH actually contains something.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:26 +02:00
Jonas Gorski
5fe923b15d kernel: allow reproducable builds
Similar how we fix the file times in the filesystems, fix the build time
of the kernel, and make the build number static. This should allow the
kernel build to be reproducable when combined with setting the
KERNEL_BUILD_USER and _DOMAIN in case of different machines.

The reproducability only applies to non-initramfs kernels, those still
require additional changes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 11:35:00 +02:00
Matteo Croce
1645abffea kernel: add plan 9 fs package
9pfs is used by kvm to share files between host and guest,
add proper config option to enable it.

Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
2016-08-11 10:45:33 +02:00
Jonas Gorski
bebcb81da5 ramips: switch from 24kec to 24kc
Since the only difference between 24Kec and 24Kc is the addition of DSP
ASE support, and we don't use it anymore, there is no need to keep 24Kec
as a separate cpu type.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-08 11:29:56 +02:00
Felix Fietkau
22ef1c83b3 kernel: make the kernel build auto-clean the build dir like package builds
Previous behavior can be restored by using QUILT=1 on target/prepare

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-05 14:17:08 +02:00
Felix Fietkau
2180b715c1 image: fix per-device rootfs build error when not all opkg package files are found
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 11:19:41 +02:00
John Crispin
4df2011794 include/image.mk: allow image code to override uImage name
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
Felix Fietkau
9abbaa9539 build: remove MIPS dsp/dsp2 CPU_SUBTYPE
There does not seem to be any meaningful difference in generated code.
This will save some time and space on snapshot builds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 14:56:45 +02:00
Felix Fietkau
f2de33b2c9 build: move merged package directory from bin/ to staging_dir
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 12:22:18 +02:00
Jo-Philipp Wich
83175687c8 build: remove image specific checksum code
Now that we globally calculate sha256sums over the bin/ directory we can remove
the target image specific checksum handling.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-01 18:11:26 +02:00
Felix Fietkau
905e50d2fb image: use the merged package directory to resolve dependencies for per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 11:13:38 +02:00
Felix Fietkau
180465c38f build: create a package feed directory containing all packages
Needed for proper dependency handling for per-device rootfs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 11:13:38 +02:00
Felix Fietkau
e351f7c695 build: fix tabs vs whitespace issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 11:13:38 +02:00
Felix Fietkau
94dec60d75 build: add template for installing device .dtb files
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Hauke Mehrtens
1448501558 build: do not depend on svn any more
LEDE does not need svn to build any more, remove the prerequisite check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-31 16:11:37 +02:00
Felix Fietkau
14488469d5 image: fix build issue with per-device rootfs and legacy devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:45:18 +02:00
Felix Fietkau
63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Felix Fietkau
baeda5d31d image.mk: add CMDLINE to DEVICE_VARS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 14:10:33 +02:00
Felix Fietkau
84718d8736 image: add support for overriding kernel/rootfs images in sysupgrade-tar template
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 14:10:33 +02:00
Felix Fietkau
50e7c1f79d include/cmake.mk: fix host builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 22:47:46 +02:00
Luke McKee
eadf5fb7f8 cmake: include/cmake.mk add CMAKE_BINARY_SUBDIR to allow out of source tree builds
Some packages need out of source tree building with cmake, for example
when building kernel modules.
See an example here:
https://sourceforge.net/p/accel-ppp/code/ci/master/tree/README

Signed-off-by: Luke McKee <hojuruku@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, rework]
2016-07-29 20:27:34 +02:00
Felix Fietkau
c5a9a08f1e image.mk: remove leftover variable from a previous rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 17:13:48 +02:00
Jo-Philipp Wich
db49dd894e build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00