Felix Fietkau
028666e75f
mac80211: Allow to select VHT80 in IBSS mode
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47781
2015-12-05 09:52:10 +00:00
Felix Fietkau
5425d27339
iw: add VHT80 support for IBSS
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47780
2015-12-05 09:52:02 +00:00
Felix Fietkau
9dd65e5493
iw: display interface TX power if available
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47779
2015-12-05 09:51:53 +00:00
Felix Fietkau
c9cb3f4d1c
iw: sync nl80211.h with compat-wireless 2015-10-26
...
Fix the id of NL80211_ATTR_WIPHY_ANTENNA_GAIN for antenna_gain command when
using compat-wireless 2015-10-26.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47778
2015-12-05 09:51:48 +00:00
Felix Fietkau
a86a5699d9
iw: update to version 4.3
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47777
2015-12-05 09:51:39 +00:00
Felix Fietkau
8d580cd7f2
mac80211: Allow enabling tracing for the drivers that support it
...
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47776
2015-12-05 09:51:35 +00:00
Felix Fietkau
9ca1080e92
busybox: Update config for 1.24.1
...
r47288 updated to Busybox 1.24.1 but did not update the configuration.
The configuration is updated by running
cd config
../convert_menuconfig.pl .../build_dir/target-*/busybox-1.24.1
cd ..
./convert_defaults.pl < .../build_dir/target-*/busybox-1.24.1/.config > \
Config-defaults.in
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 47775
2015-12-05 09:51:30 +00:00
Felix Fietkau
fff859a1f6
lantiq: remove 3.18 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47774
2015-12-05 09:51:25 +00:00
Felix Fietkau
ba0ba1e1f5
mac80211: enable build with linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47772
2015-12-04 22:40:38 +00:00
Felix Fietkau
70ac77f869
mac80211: update to 2015-12-03
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47771
2015-12-04 22:39:37 +00:00
Felix Fietkau
8b30afb005
lantiq: fix a race condition in the SPI driver leading to rx FIFO overflows (and subsequent timeouts)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47770
2015-12-04 20:26:22 +00:00
Felix Fietkau
7516989383
lantiq: debloat the ltq-vdsl-app binary
...
Use the 'typical' compile configuration instead of 'full', which most
notably excludes the soap support.
/sbin/vdsl_cpe_control shrinks down to ~50%, from 178kb(!) to 90kb.
Signed-off-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 47769
2015-12-04 20:26:17 +00:00
Felix Fietkau
9330296932
lantiq: re-enable spi-xway for TD-W89X0 now that it is fixed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47768
2015-12-04 18:35:20 +00:00
Felix Fietkau
b963cec01c
lantiq: fix xway spi driver timeout issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47767
2015-12-04 18:35:12 +00:00
Felix Fietkau
ae10274239
lantiq: clean up the xrx200 ethernet driver and fix stability issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47766
2015-12-04 17:44:06 +00:00
Felix Fietkau
1d1265b40b
br2684ctl: convert init script to procd, add hotplug/reload support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47765
2015-12-04 17:44:00 +00:00
Felix Fietkau
435e7fb295
lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47764
2015-12-04 17:42:51 +00:00
Jo-Philipp Wich
cc59f31e44
ar71xx: convert gpio switch config to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47763
2015-12-04 15:02:42 +00:00
Jo-Philipp Wich
08078df83d
board.d: add support for gpio_switch sections
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47762
2015-12-04 15:02:32 +00:00
Jo-Philipp Wich
ba8a44995f
mcs814x: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47761
2015-12-04 15:02:13 +00:00
Jo-Philipp Wich
8298dfef5c
sunxi: fix board.d permissions
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47760
2015-12-04 14:39:20 +00:00
Jo-Philipp Wich
2f042b452e
orion: convert initial network configuration to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47759
2015-12-04 14:39:14 +00:00
Jo-Philipp Wich
b6a9c5c400
sunxi: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47758
2015-12-04 14:32:52 +00:00
Jo-Philipp Wich
ca00bd2be4
ar7: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47757
2015-12-04 14:27:47 +00:00
Jo-Philipp Wich
1e4478e83a
ath25: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47756
2015-12-04 14:15:09 +00:00
Jo-Philipp Wich
5ebc5de49d
lantiq: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
Jo-Philipp Wich
708c0212e7
brcm63xx: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47754
2015-12-04 12:32:36 +00:00
Jo-Philipp Wich
08848936dd
all: remove redundant board.d/00_model files
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
61a99da4f9
base-files: board.d: auto-set model id and name if /tmp/sysinfo is available
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47752
2015-12-04 11:06:57 +00:00
Jonas Gorski
f961a3826e
kernel: drop bridge hack for removing ipv6 dependency
...
Now that IPV6 isn't build as a module anymore, we don't need to decouple
bridge from ipv6 anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47751
2015-12-04 10:06:03 +00:00
Jo-Philipp Wich
6c8daa6ba3
base-files: board.d: support dsl modems, atm bridges and pppoe protocol
...
This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.
These additions are required to port the Lantiq target to board.d.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47750
2015-12-04 09:56:55 +00:00
Jonas Gorski
813227d992
kernel: mvswitch: merge 3.10+ compile fix into the code
...
The lowest we support is 3.18, so no need to keep it as a separate
patch.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47749
2015-12-04 09:45:07 +00:00
Rafał Miłecki
304c3411ba
kernel: drop unneeded modification of mtd_add_partition function
...
In old days mtd_add_partition was checking for partitions overlapping
which was breaking our splitting feature. We had to modify this function
by adding an extra bool dup_check parameter. Upstream commit:
3a434f66e6da ("mtd: part: Remove partition overlap checks")
removed that check so we don't need our modification anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47748
2015-12-04 09:33:08 +00:00
Rafał Miłecki
416243107b
kernel: drop old uimage splitter from 4.4
...
For a long time we have a dedicated firmware splitter for uimage as a
replacement for the one builtin into mtd subsystem. For a year we got a
proper warning for users sticking to the old one (r43700). It should be
really safe to drop it now, especially since we do it for 4.4 only.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47747
2015-12-04 09:33:04 +00:00
Jo-Philipp Wich
03292739e0
malta: board.d: fix typo
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47746
2015-12-04 09:05:43 +00:00
Jo-Philipp Wich
296212c301
kirkwood: add missing board_config_flush(), remove dead code
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47745
2015-12-03 23:13:04 +00:00
Jo-Philipp Wich
527ec2af59
all: remove dummy ucidef_set_interface_loopback() from board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
3348308afd
arc770: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47743
2015-12-03 23:08:02 +00:00
Jo-Philipp Wich
dc4b0037ab
mxs: convert from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47742
2015-12-03 23:07:53 +00:00
Jo-Philipp Wich
60dbff6a5f
malta: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47741
2015-12-03 23:07:46 +00:00
Jo-Philipp Wich
81f1ccbf96
at91: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47740
2015-12-03 23:07:38 +00:00
Jo-Philipp Wich
adbe47380e
realview: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47739
2015-12-03 23:07:30 +00:00
Jo-Philipp Wich
7cf1ff8a75
imx6: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47738
2015-12-03 23:07:20 +00:00
Jo-Philipp Wich
57014a284f
netlogic: fix typo, copyright in board.d script
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47737
2015-12-03 23:06:57 +00:00
Jo-Philipp Wich
99cf19dfc2
netlogic: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47736
2015-12-03 22:46:54 +00:00
Jo-Philipp Wich
80a3e65a9d
kirkwood, ipq806x: fix board.d script permissions
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47735
2015-12-03 22:42:13 +00:00
Jo-Philipp Wich
21ea086bd3
octeon: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47734
2015-12-03 22:42:09 +00:00
Jo-Philipp Wich
7514b6d73b
kirkwood: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47733
2015-12-03 22:27:18 +00:00
Jo-Philipp Wich
f611358870
base-files: board.d: support specifiying the protocol of lan and wan
...
Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47732
2015-12-03 22:27:06 +00:00
Jo-Philipp Wich
ac9bed4bc0
base-files: board.d: support timer leds
...
Add ucidef_set_led_timer() and handling for it to config_generate.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47731
2015-12-03 22:27:02 +00:00