KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
31072 commits 1 branch 0 tags 154 MiB
Commit graph

13974 commits

Author SHA1 Message Date
Felix Fietkau
541f569a9d linux: Add missing config options to generic configs 
These missing options have been noticed while enabling the following
configuration options on ipq806x, but they're available in the standard
kernel:
*ARCH_QCOM
*CONFIG_USB_SUPPORT
*CONFIG_USB_DWC3
*CONFIG_MFD_SYSCON

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45256
 2015-04-03 18:48:10 +00:00
Felix Fietkau
4869387480 ipq806x: clean-up kernel config file 
Options that used to be in target config have been added to the generic
config file, so remove them.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45255
 2015-04-03 18:47:51 +00:00
John Crispin
a1b1be473e omap: add missing symbols 
enabled by default like other TWL4030 symbols

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45238
 2015-04-02 14:32:01 +00:00
John Crispin
69aa85a0d2 omap: add profile for BeagleBoard 
original BeagleBoard has no Ethernet
provide a profile with all available USB Ethernet adapters
EBVBeagle comes with a kmod-usb-net-mcs7830 compatible device

tested with BeagleBoard C4

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45237
 2015-04-02 14:31:51 +00:00
John Crispin
245ebe83dc omap: remove patch wlcore Add-support-for-DT-platform-data 
- does not compile with 3.18
compile error: 'struct wl12xx_platform_data' has no member named 'gpio'

- different version was sent 2015 but cannot be tested by me
see "[PATCH v7 0/6] wlcore: add device-tree support" series
in linux-omap

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45235
 2015-04-02 14:31:32 +00:00
Rafał Miłecki
509cce44bd bcm53xx: sprom: sync with mainline driver 
The main difference now is bcm53xx registering it as platform (DT)
driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45230
 2015-04-02 12:02:56 +00:00
Rafał Miłecki
91071e366c bcm53xx: sprom: simplify reading NVRAM after last backports 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45229
 2015-04-02 12:01:56 +00:00
John Crispin
bb0e931298 ipq806x: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45228
 2015-04-01 22:57:54 +00:00
Rafał Miłecki
aefcd2b84c brcm47xx: backport two MIPS nvram.c patches 
Also replace SPROM patch with (the same) mainlined version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45227
 2015-04-01 20:23:37 +00:00
John Crispin
0bba806cb7 kernel: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45218
 2015-04-01 13:06:14 +00:00
John Crispin
eeff1f0a12 ixp4xx: fix beeper module dependencies 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45214
 2015-04-01 09:03:13 +00:00
John Crispin
3ec7ccf501 config: add an option to enable KPROBE 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45212
 2015-04-01 08:33:04 +00:00
John Crispin
bf7eeea7ee ipq806x: clean up kernel conf 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45211
 2015-04-01 08:32:29 +00:00
John Crispin
d3a9fc4586 ipq806x: add support for 4.0 kernel 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45210
 2015-04-01 08:32:03 +00:00
John Crispin
2d74104b52 ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18 
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45209
 2015-04-01 08:31:52 +00:00
John Crispin
449c5f7b30 ramips: Add support for ZTE Q7 
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D

This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 45208
 2015-04-01 08:31:46 +00:00
John Crispin
e078fbdacf kernel: add missing symbols to config and modules 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: changes in input.mk broke the patch, some of the CONFIG_SND_*
    stuff was added already

SVN-Revision: 45205
 2015-04-01 08:31:26 +00:00
Rafał Miłecki
bf828d3fd0 bcm53xx: use bcm47xx_nvram.c with the latest patches 
This will be hopefully a mainline version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45204
 2015-04-01 07:21:59 +00:00
Gabor Juhos
36e10677df ar71xx: fix platform device support in the gpio-74x164 driver 
Platform device support has been removed from the gpio-74x164
driver in 3.14. Restore that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45203
 2015-03-31 21:31:36 +00:00
Rafał Miłecki
9c5aa7c528 brcm47xx: image: share function checking TRX in provided firmware 
This will allow us to calculate crc32 in a shared code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45202
 2015-03-31 21:16:19 +00:00
Imre Kaloz
f079ad97ce mvebu: use CONFIG_MANGLE_BOOTARGS 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45200
 2015-03-31 19:27:59 +00:00
Imre Kaloz
77f322e0d7 mvebu: add missing a38x dts labels 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45199
 2015-03-31 19:23:32 +00:00
Imre Kaloz
9bb302ff9e generic/4.0: upgrade to 4.0-rc6 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45198
 2015-03-31 19:22:28 +00:00
Imre Kaloz
35df52f89f generic/3.18: upgrade to 3.18.10 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45197
 2015-03-31 19:21:13 +00:00
Imre Kaloz
17fb965d6b generic: add CONFIG_MANGLE_BOOTARGS and disable it by default 
Enabling this option renames the bootloader supplied root=
and rootfstype= variables, which might have to be know but
would break the automatisms OpenWrt uses.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45196
 2015-03-31 19:18:03 +00:00
Imre Kaloz
b9c4dadc11 mvebu: deal with the new path in the fan control script for Linux 4.0+ 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45195
 2015-03-31 19:12:27 +00:00
Gabor Juhos
82f0308be9 kernel: update yaffs code to the latest version 
Use the latest version of the yaffs code. Fetched from the
yaffs2 git tree and it is based on the following commit:

  commit 7e5cf0fa1b694f835cdc184a8395b229fa29f9ae
  Author: Charles Manning <cdhmanning@gmail.com>
  Date:   Thu Aug 7 11:25:05 2014 +1200

    yaffs-direct: Basic tests. Add lpthread flag for background gc support

    Signed-off-by: Charles Manning <cdhmanning@gmail.com>

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45188
 2015-03-31 15:31:57 +00:00
Zoltan Herpai
ad9f61d3bb kernel: add a couple missing symbols for 4.0 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45186
 2015-03-31 13:23:46 +00:00
Rafał Miłecki
090a510576 brcm47xx: image: convert legacy Linksys & Netgear devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45184
 2015-03-31 12:44:31 +00:00
Rafał Miłecki
4faba3cc2e brcm47xx: image: convert generic subtarget to the new images system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45183
 2015-03-31 12:17:08 +00:00
Rafał Miłecki
3d481d31ed brcm47xx: image: convert all mips74k images to the new building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45181
 2015-03-31 11:26:50 +00:00
Rafał Miłecki
184c0af4e2 brcm47xx: image: add helpers for defining devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45180
 2015-03-31 11:26:45 +00:00
Jonas Gorski
a709beb4ae brcm63xx: fix zyxel kernel name 
Accidentally left over development artifact.

Reported-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45179
 2015-03-31 09:54:15 +00:00
Rafał Miłecki
6c1852cb26 brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings 
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'

Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45178
 2015-03-31 08:56:08 +00:00
Gabor Juhos
cc9600a1eb ar71xx/mikrotik: disable atnoher two non MikroTik boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45177
 2015-03-31 08:30:56 +00:00
Gabor Juhos
04ba95f6d3 ar71xx/mikrotik: disable non MikroTik boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45176
 2015-03-31 07:56:25 +00:00
Gabor Juhos
26800ef074 ar71xx/mikrotik: use correct symbol to disable overlayfs 
The Kconfig symbol has been changed in 3.18.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45175
 2015-03-31 07:56:22 +00:00
Rafał Miłecki
8ec31f25e3 brcm47xx: fix checking cross-vendors firmware images 
This change won't allow installing e.g. Netgear firmware on Linksys
device.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45174
 2015-03-31 07:26:30 +00:00
Rafał Miłecki
463a449f84 brcm47xx: update Linksys firmwares (add new E2500 versions) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45173
 2015-03-31 07:26:22 +00:00
Rafał Miłecki
a445846305 brcm47xx: display all errors (not just the 1st one) when checking image 
This way people forcing upgrade will know what may go wrong.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45172
 2015-03-31 06:05:35 +00:00
Rafał Miłecki
44dfe17576 brcm47xx: recognize more device specific firmwares 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45171
 2015-03-31 05:39:33 +00:00
Rafał Miłecki
b34040f990 brcm47xx: compare provided firmware magic with device magic 
This makes sysupgrade reject firmware images for different devices.
Right now only support for 2 sample devices is implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45170
 2015-03-30 22:06:11 +00:00
Jonas Gorski
a54b8303d2 brcm63xx: don't build non-dtb kernels anymore 
Now that all supported boards have an dts there is no need for a
dtb free kernel anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45169
 2015-03-30 20:21:24 +00:00
Jonas Gorski
0f08442ded brcm63xx: move DSL-275XB to DT 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45168
 2015-03-30 20:21:15 +00:00
Jonas Gorski
f77b446051 brcm63xx: move bcm6318 reference boards to DT 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45167
 2015-03-30 20:21:07 +00:00
Jonas Gorski
f644c1581a brcm63xx: move VG50 to DT 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45166
 2015-03-30 20:21:01 +00:00
Jonas Gorski
f973580488 brcm63xx: move V2110 to DT 
Also readd image generation which was accidentally dropped in r43364.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45165
 2015-03-30 20:20:49 +00:00
Jonas Gorski
d8ba40cfcd brcm63xx: use relocate to move the kernel back to start of ram 
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327).

Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45164
 2015-03-30 20:20:15 +00:00
Jonas Gorski
8353a3bd45 generic: relocate: make the cacheline size configurable 
Different targets have different cache line sizes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45163
 2015-03-30 20:20:10 +00:00
Jonas Gorski
703c41cf01 ramips: move relocating loader to common location 
Allow other targets to use it, too.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45162
 2015-03-30 20:20:08 +00:00
Gabor Juhos
3129f0c6f2 ar71xx/mikrotik: re-enable 4KiB flash sector erase 
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45161
 2015-03-30 19:57:52 +00:00
Gabor Juhos
62a8665fea ar71xx: re-enable AR8216_PHY_LEDS 
The setting has been lost during the transition to 3.18.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45160
 2015-03-30 18:12:54 +00:00
Gabor Juhos
18f6a34113 ar71xx: sync kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45159
 2015-03-30 18:12:50 +00:00
John Crispin
2b925161d8 xburst: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45155
 2015-03-30 12:47:51 +00:00
Steven Barth
7e7f329ccf kernel/generic: (try) fixing MAP-E patch broken in 4.0 
Now it at least compiles, otherwise untested.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 45145
 2015-03-30 08:48:51 +00:00
Rafał Miłecki
1751676c8b brcm47xx: convert Netgear WNDR3700 V3 to the new image building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45144
 2015-03-29 19:53:11 +00:00
Rafał Miłecki
8e4b74b9fe brcm47xx: convert Linksys E1200 V2 to the new image building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45143
 2015-03-29 18:15:38 +00:00
John Crispin
23d37c1208 ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC 
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
  the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
  after the zero (which wasn't always visible using busybox tools, but could
  confuse other scripts)

Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.

The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.

The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.

Fixes #18992.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45140
 2015-03-29 12:58:01 +00:00
Imre Kaloz
ebf1e2461a x86_64: add description, maintainership 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45138
 2015-03-29 12:17:39 +00:00
Felix Fietkau
661f05262b arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45132
 2015-03-29 07:36:17 +00:00
Luka Perkov
1e2f88b17b imx: add initial version of 3.18 support 
This is build tested only.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45125
 2015-03-29 05:48:56 +00:00
Luka Perkov
375337266d kernel: add few missing symbols 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45118
 2015-03-29 04:50:16 +00:00
Luka Perkov
d949d88ef6 kernel: add symbol 
Several targets are not using EMAC_ROCKCHIP so define it in generic config.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45117
 2015-03-29 04:43:59 +00:00
Felix Fietkau
e731ea23a8 x86: add myself as maintainer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45116
 2015-03-29 04:32:15 +00:00
Felix Fietkau
196fb76a4c x86: make x86_64 a subtarget instead of a standalone target 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45115
 2015-03-29 04:32:01 +00:00
Felix Fietkau
09aad60610 x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45114
 2015-03-29 04:31:35 +00:00
Felix Fietkau
795e7cf60d kernel: fix linux/spi/spidev.h portability issues with musl 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45105
 2015-03-29 04:28:24 +00:00
Felix Fietkau
9444bc1ee2 kernel: clean up fq_codel default patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45104
 2015-03-29 04:28:02 +00:00
Florian Fainelli
85b0d25861 adm8668: switch to 3.18 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45095
 2015-03-28 18:18:50 +00:00
Florian Fainelli
f51f3ee9bc adm8668: add 3.18 support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45094
 2015-03-28 18:18:38 +00:00
Florian Fainelli
26cf81b94b kernel: refresh 3.18 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45093
 2015-03-28 18:17:46 +00:00
Felix Fietkau
0b13d69bba arm64: update to linux 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45092
 2015-03-28 13:38:52 +00:00
Felix Fietkau
693e5aae41 brcm63xx: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45089
 2015-03-28 13:21:09 +00:00
Felix Fietkau
130acd0f4c mxs: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45088
 2015-03-28 13:21:04 +00:00
Felix Fietkau
b63aa281ee rb532: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45087
 2015-03-28 13:20:58 +00:00
Felix Fietkau
56c580f5f4 uml: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45086
 2015-03-28 13:20:52 +00:00
Felix Fietkau
7427007193 x86: remove the olpc subtarget, it has been unmaintained for a long time 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45083
 2015-03-28 11:37:08 +00:00
Felix Fietkau
518d2b90e6 iop32x: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45082
 2015-03-28 10:44:55 +00:00
Felix Fietkau
22b38f145d cobalt: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45081
 2015-03-28 10:44:49 +00:00
Felix Fietkau
04182658ef sibyte: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45080
 2015-03-28 10:44:44 +00:00
Felix Fietkau
e38b78926a sparc: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45079
 2015-03-28 10:44:37 +00:00
Felix Fietkau
40c5bee0cd cns21xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45078
 2015-03-28 10:44:31 +00:00
Felix Fietkau
65c567da13 rb532: switch to 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45073
 2015-03-27 21:22:22 +00:00
Felix Fietkau
2daa34da02 rb532: align partitions to 128KB 
because block2mtd wants "erasesize must be a divisor of device size" since 3.15

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45072
 2015-03-27 21:22:17 +00:00
Felix Fietkau
c2d1ad30e8 rb532: add 3.18 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45071
 2015-03-27 21:22:10 +00:00
John Crispin
85bf288428 lantiq: remove arphaned folder 
the new buildbot was picking this up as a valid target.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45068
 2015-03-27 19:47:22 +00:00
John Crispin
ddb5ab2acf ralink: mt7621 add ECHI OCHI XCHI support 
Lets hope that this time it won't break the other ralink targets.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45067
 2015-03-27 19:07:29 +00:00
Felix Fietkau
c6a29d2528 gemini: fix usb driver compilation on 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45065
 2015-03-27 16:03:16 +00:00
Zoltan Herpai
19db04e699 mxs: update dtb path in image Makefile 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45056
 2015-03-27 02:35:11 +00:00
Felix Fietkau
f76a85515a ar71xx: add missing id for WNR2000v3 image (fixes #18959) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45054
 2015-03-27 00:35:34 +00:00
Zoltan Herpai
a077e4af96 mxs: bump to 3.18 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45053
 2015-03-26 23:35:50 +00:00
Zoltan Herpai
01748fbce2 mxs: add sdcard image builder 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45052
 2015-03-26 23:34:43 +00:00
Zoltan Herpai
39370cbe25 mxs: enable uboot-mxs-duckbill build for duckbill profile 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45044
 2015-03-26 23:04:27 +00:00
Luka Perkov
3012319505 generic: drop old kirkwood mach types 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45043
 2015-03-26 22:48:31 +00:00
Zoltan Herpai
1f26498751 mxs: add 3.18 support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45041
 2015-03-26 22:18:47 +00:00
Felix Fietkau
65708f749a gemini: make dd commands more portable 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45039
 2015-03-26 20:37:19 +00:00
Felix Fietkau
6cda886f60 gemini: switch mantainer to myself 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45038
 2015-03-26 20:37:09 +00:00
Felix Fietkau
17532417c7 gemini: nuke 3.10 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45037
 2015-03-26 20:36:59 +00:00
Felix Fietkau
b953a14036 gemini: remove broken flag 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45036
 2015-03-26 20:36:49 +00:00
Felix Fietkau
dc622768a7 gemini: switch to 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45035
 2015-03-26 20:36:40 +00:00