Commit graph

15588 commits

Author SHA1 Message Date
Hauke Mehrtens
e9d7ee4f41 kernel: update kernel 4.4 to version 4.4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48933
2016-03-05 17:51:37 +00:00
Hauke Mehrtens
21cf64b4ad kernel: fix section mismatch in crashlog
The function memblock_insert_region() is in the section
__init_memblock, also put crashlog_init_memblock there.

This fixes this section mismatch warning:
The function memblock_insert_region.isra.1() references
the function __meminit crashlog_init_memblock().
This is often because memblock_insert_region.isra.1 lacks a __meminit
annotation or the annotation of crashlog_init_memblock is wrong.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48931
2016-03-05 16:23:50 +00:00
Hauke Mehrtens
683c046673 kernel: add missing config options
The buildbots complained about these config options being missing for arm64:
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48929
2016-03-05 16:22:45 +00:00
Felix Fietkau
3f971c0dc8 ar71xx: WNR612v2: enable control of all LEDs and buttons
This patch provides full GPIO support for WNR612v2 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48924
2016-03-05 09:45:15 +00:00
Felix Fietkau
94b8a6b5cf ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initialization
This patch add speed_mask parameter to Ethernet port LED initialization
during system startup. LEDs are configured to show amber light for 10 Mbps
link and green for 100 Mbps as described on device label.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48923
2016-03-05 09:45:10 +00:00
Felix Fietkau
53b3872ddf ar71xx: WNR2000v3: enable control of all LEDs and buttons
This patch provides full GPIO support for WNR2000v3 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48922
2016-03-05 09:45:06 +00:00
Felix Fietkau
6bece706ec mac80211: ath9k: enable GPIO buttons
Enable platform-defined GPIO button support for ath9k device.
Key poller is activated for attached platform buttons.
Requires ath9k GPIO chip access.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48921
2016-03-05 09:45:03 +00:00
John Crispin
fbb2449953 AP121 target: fix board detection in ar71xx.sh
Signed-off-by: Attila Lendvai <attila@lendvai.name>

SVN-Revision: 48916
2016-03-04 08:33:38 +00:00
John Crispin
3a03c08c82 AR8216: improve mmd register access
Combine all bus operations for one MMD access in one function.
Protecting all these bus operations with one lock also helps
to avoid potential issues due to bus operations intercepting
the register and data write.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48914
2016-03-04 08:33:33 +00:00
John Crispin
d3776bdfc9 AR8216: make ARL age time configurable
The default TTL for address resolution table entries is 5 minutes
for all members of the AR8216 family. This can cause issues if
e.g. Wifi clients roam to another AP and their MAC appears on
another switch port suddenly. Then the client may not be reachable
until the old ARL entry expires.
I would have expected the switch to invalidate old entries if it
detects the same MAC on another port. But that's not the case.

Therefore make the TTL for ARL entries configurable.
The effective TTL will always be a multiple of 7 seconds.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48913
2016-03-04 08:33:30 +00:00
John Crispin
4eaa750089 AR8216: remove redundant port number in MIB header line
The line before includes the port number anyway so there's no need
to duplicate the port number in the MIB info header.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48912
2016-03-04 08:33:28 +00:00
John Crispin
f03ec2baf7 AR8216: complement MIB counters with info in GiB / MiB / KiB
The decimal values especially for TxByte and RxGoodByte are hard to read
once bigger amounts of data have been transferred.
Therefore complement the decimal values with info in GiB / MiB / KiB.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48911
2016-03-04 08:33:25 +00:00
John Crispin
76e1efc042 AR8216: don't display MIB counters if all are empty
For unused switch ports all MIB values are zero. Displaying ~40 empty
MIB counters is just confusing and makes it hard to read the output of
swconfig dev <dev> show.
Therefore, if all MIB counters for a port are zero, just display
an info that the MIB counters are empty.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48910
2016-03-04 08:33:22 +00:00
John Crispin
f07a57c0e8 imx6: image: Add missing kernel prefix
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 48909
2016-03-04 08:33:20 +00:00
John Crispin
77da9390da ramips: mt7621: fix WF-2881 for ubi split
This patch fix firmware split for WF-2881 which was previously manually partitioned.

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 48908
2016-03-04 08:33:17 +00:00
John Crispin
9d828931f1 ramips: Add profiles for JCG routers
This patch adds profiles and support for building factory and
sysupgrade images for JHR-N805R, JHR-N825R and JHR-N926R.

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48906
2016-03-04 08:33:12 +00:00
John Crispin
43dd2b9965 ramips: Add JCG routers to base-files
This patch adds support for JHR-N805R, JHR-N825R and JHR-N926R to
various scripts in the base-files directory.

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48905
2016-03-04 08:33:09 +00:00
John Crispin
ca64f498f0 ramips: Add device tree for JCG JHR-N926R
Add a device tree for JCG JHR-N825R

This router is based on a RT3052 and has 4MB of CFI flash and 32MB of
SDRAM. As a special feature, it comes with a two digit seven segment
display that is connected to a pair of daisy-chained 74164 shift
registers that can be controlled via GPIOs.

For details, see https://wikidevi.com/wiki/JCG_JHR-N825R .

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48904
2016-03-04 08:33:06 +00:00
John Crispin
97ca4cbc94 ramips: Add device tree for JCG JHR-N825R
Add a device tree for JCG JHR-N825R

This router is based on a RT3052 and has 4MB of CFI flash and 32MB of
SDRAM. For details, see https://wikidevi.com/wiki/JCG_JHR-N825R .

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48903
2016-03-04 08:33:03 +00:00
John Crispin
73f4c3f2ab ramips: Add device tree for JCG JHR-N805R
Add a device tree for JCG JHR-N805R

This router is based on a RT3050 and has 4MB of SPI flash and 16MB of
SDRAM. For details, see https://wikidevi.com/wiki/JCG_JHR-N805R .

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48902
2016-03-04 08:33:00 +00:00
John Crispin
e4dc6acd31 ramips: Incorrect file mode change
Commit d0f5ab6d95a1 ("ramips: Added support for ZBT-826 / ZBT-1026")
incorrectly changed the mode of the ramips shell scripts from 755 to 644.
I.e., they are not excutable any more and for example devices will be left
with broken configs.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>

SVN-Revision: 48893
2016-03-03 20:24:45 +00:00
John Crispin
74c6b21973 target/mpc85xx: check for 'generic' subtarget for initramfs image file
Copy 'cuImage.tl-wdr4900-v1-initramfs' only for the 'generic' subtarget.
This is a follow-up to:
 http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=b889fe55c1844aec2c03da28fecb03e958c21f18

We build our initramfs images more rarely, so it took a while
to catch this too.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 48892
2016-03-03 20:24:41 +00:00
Felix Fietkau
15517811e4 ramips: enable mt76 on mt7688 by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48886
2016-03-02 17:40:58 +00:00
Felix Fietkau
a8c15c0204 mac80211: ath9k: enable platform WLAN LED name
Enable platform-supplied WLAN LED name for ath9k device.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48879
2016-03-02 13:22:40 +00:00
Hauke Mehrtens
7768735873 kernel: update kernel 3.18 to version 3.18.27
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48874
2016-03-01 23:16:17 +00:00
John Crispin
7d008e8bf0 ar71xx: Add OOLITE to the Gainstrong profile, removed standalone profile.
This patch moves the OOLITE profile code into the overarching Gainstrong
profile and deletes the old single profile file.

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 48866
2016-03-01 09:17:09 +00:00
John Crispin
96eb5c6fa8 ramips: Added support for ZBT-826 / ZBT-1026
Support for these MT7620-based routers: https://wiki.openwrt.org/toh/zbt/we-826
Based on Oskari’s patches found here: https://dev.openwrt.org/ticket/19996

Signed-off-by: Jamie Stuart <jamie@onebillion.org>

SVN-Revision: 48865
2016-03-01 09:17:06 +00:00
Felix Fietkau
619a58d641 ar71xx, firmware-utils: split ubdev01 flash layout from XM
The ubdev01 profile defines its own MTDPARTS with smaller firmware
partition, so give it its own UBNT_BOARD in mkfwimage.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 48828
2016-02-29 20:11:30 +00:00
Felix Fietkau
28458bd057 ramips: add sysupgrade support for mt7628
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48813
2016-02-28 15:46:27 +00:00
Felix Fietkau
dc6533d982 ramips: create device tree node for MT7628 WMAC in preparation for future work on driver support in mt76
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48812
2016-02-28 13:21:54 +00:00
Felix Fietkau
ce9dc109a4 Revert "ar71xx: WNR612v2: exclude USB modules from image"
This reverts commit r48778. The issue has now been fixed properly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48808
2016-02-26 20:47:13 +00:00
Rafał Miłecki
578e8d6c58 kernel: use upstream accepted bcm47xxpart patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48805
2016-02-26 11:12:50 +00:00
Felix Fietkau
1185e645a7 kernel: disable MIPS VDSO by default until the cache issues have been resolved
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48802
2016-02-26 09:49:32 +00:00
John Crispin
ae27fab5cf ar71xx: Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and updated copyright
This is the first patch of a series of three to tidy up the profiles for
Gainstrong devices. Right now there are two Gainstrong profiles, each
for a single device built by this manufacturer. This patch renames the
MiniBox profile to Gainstrong and updates the copyright notice.

The series applies cleanly to current trunk. Resent with the architecture in
the subject, forgot that the first time.

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 48797
2016-02-26 08:35:38 +00:00
John Crispin
f998540e80 ramips: fix GPIO names for RT5350F-OLinuXino-EVB
Hi,

the board in subject (RT5350F-OLinuXino-EVB) still ships from vendor
with a RC3 image built upon a .dts file which declares GPIO12 and GPIO14
as relay2 and relay1 respectively, as you can see from their rt5350f
branch on GitHub.

For some reason in the official stable build both the GPIOs are swapped
and the wrong names are declared in the gpio-export directive.

I'm submitting this patch which should roll back the wrong changes, so
that we get backward compatibility with any script developed on RC3
which controls the relays.

After patching correct operation is restored:

root@OpenWrt:/# cat /sys/kernel/debug/gpio
GPIOs 0-21, platform/10000600.gpio, 10000600.gpio:
 gpio-0   (button              ) in  hi
 gpio-12  (relay2              ) out lo
 gpio-14  (relay1              ) out lo

Thank you,

Signed-off-by: Lorenzo Cafaro <lorenzo@ibisco.net>

SVN-Revision: 48796
2016-02-26 08:35:35 +00:00
John Crispin
cbfec477ce mpc85xx/tl-wdr4900: correct address of the gpio controller
since linux 3.19 the address of the gpio-controller changed

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 48794
2016-02-26 08:35:29 +00:00
Hauke Mehrtens
eea54160a1 kernel: deactivate the vdso gettimeofday function.
The vdso version of this function has some problems with the cache.
Very often it works on dated data which causes problem. We are
currently working on fixing this in upstream Linux kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48787
2016-02-25 22:31:51 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Felix Fietkau
5be9e97a82 ar71xx: WNR612v2: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR612v2. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses. This is the same fix as for WNR2000v3.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48779
2016-02-25 13:31:38 +00:00
Felix Fietkau
e0d358c436 ar71xx: WNR612v2: exclude USB modules from image
Netgear WNR612v2 has no USB port yet default system image
includes USB kernel modules. This patch fixes that.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48778
2016-02-25 13:31:35 +00:00
Felix Fietkau
3964ac919a ar71xx: WNR2000v3: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR2000v3. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48777
2016-02-25 13:31:32 +00:00
Felix Fietkau
d527b82862 switch: allow Ethernet port LEDs to show specific port speeds only
This patch adds speed_mask special file to LEDs connected to switch ports
via 'switch' trigger. It allows to choose which speeds to signal when link
is up. If router has more than one LED per port, they may light up
differently depending on how fast connection is. Default setting is 'all
speeds' so backward compatibility with system scripts (for example uci) is
maintained.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48775
2016-02-25 13:31:26 +00:00
Felix Fietkau
f61a80444c switch: make LED port_mask file write handler use kstrtoul() function
This patch changes swconfig_trig_port_mask_store() handler to utilize
kstrtoul() function instead of call to obsolete simple_strtoul(). Thanks
to this change, new handler takes less memory and makes port_mask special
file accept not only hexadecimal, but also decimal and octal numbers.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48774
2016-02-25 13:31:23 +00:00
John Crispin
074cc7ac38 ramips: mt7620: fix failsafe switch config
As indicated in the bug tracker[1], failsafe mode is broken on at least some
devices using the mt7620 switch (and possibly mt7621). The thread explicitly
mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device
using the mt7621 switch; the issue also applies to the Netgear EX2700.

The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1
by the switch driver. Connecting to and/or pinging the device fails. This patch
fixes the failsafe preinit config, by making sure that vlan support is disabled.
It currently only fixes the switch config on mt7620, but might apply to the
mt7621 as well, so the patch has been designed with this in mind.

A similar (line wrapped) patch was submitted in December by Simon Peter, but never
accepted and/or discussed.

This patch applies to both Chaos Calmer and trunk.

[1] https://dev.openwrt.org/ticket/18768

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48772
2016-02-25 10:14:22 +00:00
John Crispin
cb49742f99 ramips: build factory images for Netgear EX2700
This patch adds support for building factory and sysupgrade images
for the Netgear EX2700 that don't require modification of u-boot
environment variables.

The bootloader on this device expects the kernel partition to end
on a 64k block boundary. The last 64 byte of the kernel partition
must contain a valid uImage header - in the stock firmware, this is
the uImage header of the root filesystem. For this patch, we're using
the uImage header of a 0 byte partition (ex2700-fakeroot.uImage).

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48771
2016-02-25 10:14:19 +00:00
John Crispin
56714adb4b ar71xx: correct imagename for TPlink WA730RE
- insert missing "-" to separate model and version

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48769
2016-02-25 10:14:13 +00:00
John Crispin
2a58dbda98 ar71xx: correct imagename for TPlink WA701ND
- it seems there was never a 701N-model build

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48768
2016-02-25 10:14:11 +00:00
John Crispin
bf49188bb1 ar71xx: matchup of TPlink WR841N(D)-names
- remove the suffix (N, ND) to indicate that the image is for all
  WR841-models
- some of these models have a "N"-suffix, others have (ND)-suffix,
  but the boards are the same - only difference is the detachable
  antenna on "D"-models
- discussed this idea to remove the suffix in IRC with jow and Borromini

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48767
2016-02-25 10:14:08 +00:00
John Crispin
0834f9f076 brcm2708: remove linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766
2016-02-25 10:14:05 +00:00
John Crispin
b3dc9566a4 brcm2708: switch to linux 4.4 and update patches
As usual these patches were extracted from:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48765
2016-02-25 10:14:01 +00:00