Florian Fainelli
|
48c1634d3e
|
fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
SVN-Revision: 17149
|
2009-08-06 18:53:44 +00:00 |
|
Florian Fainelli
|
39c22483bd
|
fix printing of offsets
SVN-Revision: 17099
|
2009-08-02 13:50:39 +00:00 |
|
Florian Fainelli
|
9887dc6100
|
add experimental support for 2.6.28.10, tested on bcm6338
SVN-Revision: 17054
|
2009-07-30 21:29:25 +00:00 |
|
Florian Fainelli
|
5df0606265
|
fix typos introduced in 16942
SVN-Revision: 16943
|
2009-07-21 12:22:01 +00:00 |
|
Florian Fainelli
|
8b17c74376
|
make the ethernet driver compile with newer kernels
SVN-Revision: 16942
|
2009-07-21 11:48:08 +00:00 |
|
Florian Fainelli
|
43a3f9555a
|
request irq with the platform driver name instead of bus_id which is being removed in newer kernels
SVN-Revision: 16932
|
2009-07-20 10:52:08 +00:00 |
|
Florian Fainelli
|
ca16accfbb
|
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset.
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>
SVN-Revision: 16396
|
2009-06-10 08:24:13 +00:00 |
|
Florian Fainelli
|
e9c22f7939
|
cleanup the watchdog driver a bit
SVN-Revision: 16395
|
2009-06-09 21:35:51 +00:00 |
|
Florian Fainelli
|
972619416e
|
fix the watchdog driver and enable it by default
SVN-Revision: 16394
|
2009-06-09 21:28:15 +00:00 |
|
Florian Fainelli
|
01118457e8
|
rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).
SVN-Revision: 16393
|
2009-06-09 08:04:52 +00:00 |
|
Florian Fainelli
|
4f72fef05e
|
remove this line which got accidentaly succesfully applied, but should not have (#5285)
SVN-Revision: 16380
|
2009-06-08 13:42:11 +00:00 |
|
Florian Fainelli
|
8f84508c25
|
fix ethernet driver removal
SVN-Revision: 16335
|
2009-06-04 10:04:53 +00:00 |
|
Florian Fainelli
|
50936e1aa5
|
fix pcmcia device removal
SVN-Revision: 16334
|
2009-06-04 10:04:11 +00:00 |
|
Florian Fainelli
|
116a53a154
|
add missing null entry in pcmcia driver
SVN-Revision: 16333
|
2009-06-04 10:03:41 +00:00 |
|
Florian Fainelli
|
4049592268
|
request gpio pins and set direction correctly for pcmcia
SVN-Revision: 16332
|
2009-06-04 10:03:03 +00:00 |
|
Florian Fainelli
|
d2b2ce325a
|
merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU.
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.
SVN-Revision: 16302
|
2009-06-03 08:55:18 +00:00 |
|
Florian Fainelli
|
05b40c8d13
|
backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
SVN-Revision: 16277
|
2009-06-01 18:27:51 +00:00 |
|
Florian Fainelli
|
0d7f5f8d2c
|
add support for sysupgrade (#5117)
SVN-Revision: 15900
|
2009-05-17 16:53:57 +00:00 |
|
Florian Fainelli
|
dd2b72105b
|
fix redundant driver name printing in probe function
SVN-Revision: 15254
|
2009-04-19 13:32:54 +00:00 |
|
Florian Fainelli
|
14832d3c23
|
some more fixes to the SPI controller driver
SVN-Revision: 15146
|
2009-04-08 08:52:57 +00:00 |
|
Florian Fainelli
|
8065eb4a55
|
do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
SVN-Revision: 14848
|
2009-03-11 10:32:44 +00:00 |
|
Florian Fainelli
|
51125fb616
|
make SPI work in full-duplex mode by default
SVN-Revision: 14841
|
2009-03-10 15:28:29 +00:00 |
|
Florian Fainelli
|
ae1ed9b7f4
|
add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
SVN-Revision: 14793
|
2009-03-08 15:27:46 +00:00 |
|
Florian Fainelli
|
2d1ed46c68
|
fix a bcm963xx-flash warning
SVN-Revision: 14730
|
2009-03-02 18:55:47 +00:00 |
|
Florian Fainelli
|
7ab973e1af
|
Add bcm63xx_wdt but do not enable it yet
SVN-Revision: 13677
|
2008-12-17 14:06:03 +00:00 |
|
Florian Fainelli
|
6acf4c2a19
|
Fix remaining bug of the off-by-one error ;)
SVN-Revision: 13551
|
2008-12-08 21:00:00 +00:00 |
|
Florian Fainelli
|
f3be50a031
|
Add support for bcm96348gw10 (Netgear DG834GT) (#4319)
SVN-Revision: 13540
|
2008-12-07 20:34:48 +00:00 |
|
Florian Fainelli
|
01a5c953a3
|
Fix an off-by one printing error
SVN-Revision: 13469
|
2008-12-02 14:11:54 +00:00 |
|
Florian Fainelli
|
cc2e43992d
|
bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver
SVN-Revision: 13379
|
2008-11-27 20:40:03 +00:00 |
|
Florian Fainelli
|
1c77ec0587
|
Flatten brcm63xx patches, should make our life easier to patch files now ;)
SVN-Revision: 13368
|
2008-11-26 18:41:01 +00:00 |
|
Florian Fainelli
|
e854a26332
|
Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
SVN-Revision: 13299
|
2008-11-20 21:26:11 +00:00 |
|
Florian Fainelli
|
0d4286b0b3
|
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201)
SVN-Revision: 13213
|
2008-11-15 11:30:22 +00:00 |
|
Florian Fainelli
|
517e3d404c
|
Delete old brcm63xx files
SVN-Revision: 13210
|
2008-11-15 11:21:42 +00:00 |
|
Felix Fietkau
|
d0388bbe5c
|
brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
SVN-Revision: 13130
|
2008-11-06 12:52:39 +00:00 |
|
Florian Fainelli
|
691e187381
|
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
SVN-Revision: 13015
|
2008-10-20 12:55:28 +00:00 |
|
Florian Fainelli
|
ebf4eb11e9
|
Upgrade brcm63xx to 2.6.24
SVN-Revision: 10455
|
2008-02-13 17:31:17 +00:00 |
|
Felix Fietkau
|
56231056ea
|
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
SVN-Revision: 8653
|
2007-09-06 16:27:37 +00:00 |
|