Commit graph

14 commits

Author SHA1 Message Date
John Crispin
7dbbdfb61f ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.

This patch adds its initial support.

v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 42552
2014-09-15 10:19:38 +00:00
Imre Kaloz
ecba34a3ee add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 42130
2014-08-11 11:44:51 +00:00
Imre Kaloz
dc628f2e08 add support for the archer c5
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41814
2014-07-23 12:47:25 +00:00
Imre Kaloz
7e2c4d5732 extract and fixup the board.bin on the archer
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41757
2014-07-19 13:20:14 +00:00
Gabor Juhos
6991725a1e ar71xx: add user-space support for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5652/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41619
2014-07-13 18:21:06 +00:00
John Crispin
f8f6678574 ar71xx: nbg6716: extract ath10k wifi board.bin
With help of this script the ath10k board.bin settings are loaded from
flash and saved to the ath10k firmware directory. The driver reads it
later in the boot process.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41562
2014-07-10 19:16:23 +00:00
Gabor Juhos
e9c80a1224 ar71xx: fix failsafe acces on several devices
The ar71xx platform always uses the eth0 interface to provide
access to the device in failsafe mode. Due to this, failsafe
access is broken on devices where the LAN ports are connected
to the 'eth1' interface.

Update the relevant script to correctly set the ifname variable
for these devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39752
2014-02-25 17:40:04 +00:00
John Crispin
67f5f188b1 base-files: input/button drivers get loaded before preinit by procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
Felix Fietkau
c918810414 ar71xx: switch to kmod-gpio-button-hotplug
SVN-Revision: 30660
2012-02-20 10:51:48 +00:00
Gabor Juhos
5177814ade ar71xx: change user-space board detection
SVN-Revision: 29432
2011-12-05 12:56:20 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
Daniel Dickinson
6bccc41f6c ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
SVN-Revision: 21634
2010-05-30 03:20:49 +00:00
Felix Fietkau
0e84ed29ea preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
SVN-Revision: 19370
2010-01-28 19:28:02 +00:00
Felix Fietkau
56bc02a305 add preinit modularization work by Daniel Dickinson (cshore)
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00