Commit graph

217 commits

Author SHA1 Message Date
Gabor Juhos
7298ef2456 ramips: rt305x: add profile for the Belkin f5d8235v2
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30432
2012-02-11 15:11:32 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
2012-01-26 10:44:23 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
2012-01-24 11:48:45 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
Gabor Juhos
2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
2011-12-01 22:48:38 +00:00
Gabor Juhos
ee8077f0fe ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
Gabor Juhos
9085b05d9e ramips: rt305x: support for wr512-3gn-like routers
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
Gabor Juhos
e1b176de82 ramips: rt305x: add some USB modules to the default profile
SVN-Revision: 27999
2011-08-15 14:11:58 +00:00
Gabor Juhos
169d68c98c ramips: rt305x: add dwc_otg driver
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
Gabor Juhos
6ef87ff5e6 ramips: sync kernel config
SVN-Revision: 27993
2011-08-15 14:11:48 +00:00
Gabor Juhos
a3c7e71ae1 ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
Gabor Juhos
ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
Gabor Juhos
437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
Gabor Juhos
7193f29d96 ramips: rt305x: enable M25P80 driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
Gabor Juhos
57122e7ccc ramips: add SPI controller driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
Gabor Juhos
646f64d389 ramips: remove 2.6.37 stuff
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
Gabor Juhos
0fde070cf9 ramips: add 2.6.39 support
Based on the patches from #9625

SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
Gabor Juhos
87f5872f35 ramips: remove 2.6.36 stuff
SVN-Revision: 26329
2011-03-27 19:20:06 +00:00
Gabor Juhos
90d37adb8d ramips: switch to 2.6.37
SVN-Revision: 26328
2011-03-27 19:20:04 +00:00
Gabor Juhos
23518bb2e4 ramips: initial board support for Aztech HW550-3G
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram).  Ethernet is not working yet.
Wireless appears to work fine.  USB does not work yet (as with other
Ralink boards).

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
Gabor Juhos
16366feafb ramips: add watchdog driver
SVN-Revision: 25126
2011-01-26 20:48:41 +00:00
Gabor Juhos
d2fdd1dbe1 ramips: remove 2.6.3[24] support
SVN-Revision: 24562
2010-12-14 08:00:31 +00:00
Gabor Juhos
0449d92dd7 ramips: add support for 2.6.36
SVN-Revision: 24270
2010-12-05 20:14:38 +00:00
Gabor Juhos
01a5cb48c8 ramips: default profile fix
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24269
2010-12-05 20:14:35 +00:00
Gabor Juhos
21c8d63505 ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
Gabor Juhos
39c57eeb31 ramips: allow USB
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

SVN-Revision: 23128
2010-09-27 14:42:07 +00:00
Gabor Juhos
462dabc7f5 ramips: add support for Sparklan WCR-150GN board
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
Gabor Juhos
9ee8b1f8c6 ramips: sync kernel config
SVN-Revision: 22170
2010-07-13 16:52:02 +00:00
Alexandros C. Couloumbis
cd2069a57c fix commit r21994 (thanks juhosg)
SVN-Revision: 21995
2010-06-30 19:46:45 +00:00
Alexandros C. Couloumbis
0409c64e34 fix commit r21993
SVN-Revision: 21994
2010-06-30 19:35:12 +00:00
Gabor Juhos
178e4e9927 ramips: add missing 2.6.34 config files
SVN-Revision: 21605
2010-05-28 19:45:21 +00:00
Gabor Juhos
fdf1561386 ramips: sync 2.6.32 config
SVN-Revision: 21603
2010-05-28 19:45:10 +00:00
Gabor Juhos
09aec474af ramips: add diag support
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00
Gabor Juhos
2872bade69 ramips: enable image commandline hack and cmdline partition parsing
SVN-Revision: 20798
2010-04-11 17:47:20 +00:00
Gabor Juhos
af05b16c98 ramips: add default profiles
SVN-Revision: 20797
2010-04-11 17:47:17 +00:00
Gabor Juhos
ce2ac05602 ramips: sync kernel config
SVN-Revision: 20614
2010-03-30 21:24:05 +00:00
Nicolas Thill
e1863691d9 do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
SVN-Revision: 20136
2010-03-11 09:50:11 +00:00
Imre Kaloz
825b37cc56 clean up handling of some kernel symbols
SVN-Revision: 19581
2010-02-11 09:33:16 +00:00
Imre Kaloz
0a52bc58f8 re-sort all target and subtarget config files
SVN-Revision: 19580
2010-02-11 08:55:15 +00:00
Gabor Juhos
1e4e3b21fb ramips: nuke 2.6.30 support
SVN-Revision: 19466
2010-01-31 17:56:41 +00:00
Gabor Juhos
30a397fd5e ramips: register gpio buttons on the DIR-300 revB board
SVN-Revision: 19410
2010-01-30 15:25:44 +00:00
Gabor Juhos
9327f02b7b ramips: add common gpio-buttons device
SVN-Revision: 19404
2010-01-30 15:25:20 +00:00
Gabor Juhos
b34feab713 ramips: add preliminary support for 2.6.32
SVN-Revision: 19343
2010-01-26 09:57:38 +00:00
Gabor Juhos
03aa95b791 ramips: sync kernel config
SVN-Revision: 19341
2010-01-26 09:57:32 +00:00
Imre Kaloz
6b280112f2 some more Kconfig symbol move..
SVN-Revision: 18371
2009-11-11 11:52:41 +00:00
Imre Kaloz
1d62d9a95c another round of kernel config cleanups
SVN-Revision: 18370
2009-11-11 11:42:24 +00:00
Imre Kaloz
ef42fb4c13 sort all target config files
SVN-Revision: 18367
2009-11-11 09:27:13 +00:00
John Crispin
1729f7bdc1 use gpio_led package rather than staticly linking it into the kernel
SVN-Revision: 18154
2009-10-25 18:08:16 +00:00
John Crispin
6a56b1186e select CONFIG_LEDS_GPIO per default
SVN-Revision: 18151
2009-10-25 17:06:01 +00:00
John Crispin
c7db1ecc33 select fon20n mach
SVN-Revision: 18137
2009-10-24 23:08:06 +00:00
John Crispin
d95163658c adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet
SVN-Revision: 18128
2009-10-23 16:51:51 +00:00
Gabor Juhos
279c5dad25 ramips: add preliminary support for the DIR-300 revB board
SVN-Revision: 18058
2009-10-18 08:48:07 +00:00
Andy Boyett
c85a89348f move IMAGE_CMDLINE_HACK default to generic from targets
SVN-Revision: 17905
2009-10-05 17:05:34 +00:00
Felix Fietkau
dc12314e83 ramips: since both subtargets are marked as broken, move FEATURES to the main target and mark the whole target as broken. avoids unnecessary user confusion about inexplicable build failures
SVN-Revision: 17728
2009-09-25 21:01:42 +00:00
Gabor Juhos
47c0d7419f kernel: get rid of the simple_prom_emulator, it is not really useful
SVN-Revision: 17567
2009-09-10 18:30:20 +00:00
Gabor Juhos
d59f5b3a98 kernel: add generic image_cmdline hack to MIPS targets
SVN-Revision: 17563
2009-09-10 18:30:01 +00:00
Gabor Juhos
09677bf748 initial support for the AP-R3052-V22RW-2X2 board
SVN-Revision: 17473
2009-09-02 15:31:00 +00:00
Gabor Juhos
2dbe6d0e6f remove unused *_MACH_GENERIC config options
SVN-Revision: 17461
2009-09-01 19:34:21 +00:00
Gabor Juhos
ff92681121 register GPIO LEDs on the WHR-G300N board
SVN-Revision: 17449
2009-08-31 09:14:18 +00:00
Gabor Juhos
cf10d5fa39 rt305x: remove HW_HAS_PCI config option
SVN-Revision: 17447
2009-08-31 08:29:23 +00:00
Gabor Juhos
051c44e0c5 initial support for RT288x/RT305x
SVN-Revision: 17439
2009-08-30 19:15:51 +00:00