Commit graph

22 commits

Author SHA1 Message Date
Hauke Mehrtens
73ba5e11f7 lantiq: fix lantiq applications kernel 4.14 compatiblity
This is fixing multiple compile problems with kernel 4.14 and updates the
code to take care of changes introduced between kernel 4.9 and 4.14.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-20 19:25:17 +01:00
Mathias Kresin
d3fd38637f lantiq: create ATM/PTM interfaces with dsl as netdev name
Renaming an atm etherbride using 'ip link' (via hotplug) is racy since the
original netdev might disappear before br2684ctl has finished appling it's
setting:

 local2.notice br2684ctl[1667]: Interface "nas0" created sucessfully
 local2.notice br2684ctl[1667]: Communicating over ATM 0.8.35, encapsulation: LLC
 kern.info kernel: dsl0: renamed from nas0
 kern.err kernel: br2684:br2684_regvcc: tried to attach to non-existent device
 local2.err br2684ctl[1667]: Could not configure interface:No such device or address

By passing the final used netdev name to br2684ctl_wrap another race
condition workaround will be enabled again.

Change the lantiq ptm driver to create a netdev with the name dsl as well.
Albeit the rename via 'ip link' works fine so far, using a different
approach for ptm then atm could be confusing.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-10 08:08:53 +01:00
Jonas Gorski
dea3bad84e ltq-ptm: add missing depency to ltq-?dsl-*-mei
Add the required dependency to the mei driver as cought by the depenceny
checker.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Mathias Kresin
bd523d4573 ltq-ptm: mark AmazonSE support as broken
Albeit ltq-ptm is supported on AmazonSE, the package fails to compile.
Mark the AmazonSE variant as broken to not mark it unnecessary harder
to fix (and test) the compile error.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Daniel Golle
289d190f66 lantiq: ltq-ptm: fix ADSL showtime handler
commit 2d6c7c2526 introduced a reference to g_xdata_addr which isn't
defined in that context. Use xdata_addr here instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-08-29 02:20:45 +02:00
Martin Schiller
2d6c7c2526 lantiq: ltq-atm/ltq-ptm: fix showtime handling on driver load
This is needed to be able to load the ltq-atm/ltq-ptm driver
from a notify script during synchronization, because the line can
reach showtime state before the driver is fully loaded.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00
Florian Eckert
4482063c34 treewide: add license tags
Add licence tags where missing.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-06-24 22:36:38 +02:00
Hauke Mehrtens
2eed1179be ltq-ptm: use netif_trans_update() only for kernel >= 4.7
This fixes a bug introduced in commit c7ce9908bd
"ltq-ptm: fix build with kernel 4.9"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-12 01:26:33 +01:00
Hauke Mehrtens
c7ce9908bd ltq-ptm: fix build with kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:31:47 +01:00
Alexandru Ardelean
28502a928c kernel/lantiq/ltq-*: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
David Woodhouse
8a2a20e71e ltq-ptm: Support 1508-byte MTU for RFC4638
Tested with VDSL on TP-Link WD8970, I see full 1500-byte PPP data
frames, which end up being 1526 byte Ethernet frames (including
Ethernet+VLAN headers) on the wire.

Fixes: FS#210

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2016-10-15 11:36:51 +02:00
John Crispin
b8ab6af1a9 global: change my email address
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
John Crispin
45b6eec9fc lantiq: ltq-ptm: set carrier status
Principal purpose is to prevent the error message

  ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime

which is printed at least once per second to the serial console, if the
ptm interface is not in showtime, but a processes already sends
packages over that interface. This happens for adsl as well as vdsl
over ptm.

It's pppd which sends packages over the ptm device before in showtime.
As far as I can see, pppd is started unconditionally since netif can
not gather the link status of the ptm network interface.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47917
2015-12-17 09:28:21 +00:00
John Crispin
4c8227539e lantiq: Make ATM and PTM drivers compatible with kernel 4.1
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46218
2015-07-07 13:44:04 +00:00
John Crispin
a7d3219b0c lantiq: ltq-ptm-{ar9, ase, xway}: fix alloc_netdev for 3.18
buildbot complained about
ifxmips_ptm_adsl.c:1445:70: error: macro "alloc_netdev" requires 4 arguments, but only 3 given
         g_net_dev[i] = alloc_netdev(0, g_net_dev_name[i], ether_setup);
                                                                      ^
fix that similar to the change made to ltq_ptm_vdsl.c
compile tested only.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44632
2015-03-09 14:07:14 +00:00
John Crispin
0d414e1c78 lantiq: fix netdev setup in ltq-ptm-vdsl
The initial fix for 3.18 in r44346 wrongly treated the newly added
parameter of alloc_netdev to be another function pointer, causing
ether_config to be skipped during ptm netdev init.
Fix this by partially reverting r44346 and properly setting the newly
added macro parameter.
(Tested on VRX200 board)

A similar change might be needed for ltq-ptm-adsl as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44607
2015-03-05 20:25:18 +00:00
John Crispin
64f9626963 lantiq: fix dsl drivers for 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44346
2015-02-09 12:12:52 +00:00
John Crispin
76e873a289 lantiq: cleanup vdsl driver bringup
config interface 'wan'
	# a, b, j
	option annex b
	# a, b, av, bv
	option tone b
	# vdsl.bin
	option firmware
	# atm, ptm
	option xfer_mode atm

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40437
2014-04-09 16:31:24 +00:00
John Crispin
aa1118c79b lantiq: fix ptm crash under load
https://dev.openwrt.org/ticket/14581

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40335
2014-03-30 14:01:21 +00:00
John Crispin
c1316c09a1 lantiq: fix ltq_ptm compile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38329
2013-10-07 20:13:32 +00:00
John Crispin
2b0cb17d42 lantiq: update packages for v3.10
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38028
2013-09-17 21:45:56 +00:00
John Crispin
4ebf19b48f packages: clean up the package folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007
2013-06-21 16:54:37 +00:00