Commit graph

42992 commits

Author SHA1 Message Date
Felix Fietkau
df1191bcea mt76: update to the latest version
417cf49 mt7603: improve recovery from MCU hang

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-07 20:36:50 +01:00
Rafał Miłecki
4d5b0efc09 mac80211: brcmfmac: backport the last accepted 4.21 changes
It's a typo fix & patch that helps debugging possible WARN-ings.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:17:00 +01:00
Rafał Miłecki
3eab6b8275 mac80211: brcmfmac: backport NVRAM loading improvements
This adds support for storing board specific NVRAM files as firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:11:08 +01:00
Rafał Miłecki
5932eb690f mac80211: brcmfmac: backport firmware loading cleanup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:43:32 +01:00
Rafał Miłecki
b50f162b3c mac80211: brcmfmac: backport the latest 4.20 changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:14:55 +01:00
Rafał Miłecki
f7a3459ab9 mac80211: brcmfmac: rename 4.20 backport patches
Include kernel version to help tracking changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 08:54:16 +01:00
Felix Fietkau
4fd9a5667e mt76: update to the latest version
172f081 mt76x0: do not overwrite other MT_BBP(AGC, 8) fields
2ae2046 mt76x0: phy: use mt76_poll_msec in mt76x0_phy_temp_sensor
add66a0 mt76x0: init: use mt76x02_mac_shared_key_setup in mt76x0_init_hardware
1f24db9 mt76x2: move wcid_tx_rate conf at bootstrap
097b2bd mt76x0: init: use mt76x02_mac_wcid_setup for wcid configuration
d0eb03e mt76x2u: init: remove not useful configuration
c7aa8f4 mt76x2u: init: use common routines for wcid/key initialization
bd568d9 mt76: move mt76x02_eeprom_copy in mt76x02-lib module
57b441d mt76x0: phy: introduce tssi calibration support
a78802c mt76x0: phy: use tssi reported value to configure tx power if available
94ad030 mt76: remove mcu_msg_alloc
15cb426 mt76: remove wait argument from mt76x02_mcu_function_select
cd76a83 mt76: remove wait argument from mt76x02_mcu_set_radio_state
9b97e0f mt76x02: run calibration after scanning
663b197 mt76x02: assure we update gain after scan
eb53745 mt76x0: dfs: fix IBI_R11 configuration on non-radar channels
ef06c30 mt76: avoid queue/status spinlocks while passing tx status to mac80211
5195257 mt7603: fix maximum rx frame size
01815e9 mt7603: use mutex from struct mt76_dev
3c8e8a7 mt7603: use irq_lock/irqmask from struct mt76_dev
8b7f50d mt76: add size check for additional rx fragments
87bad3a mt7603: stop MAC on watchdog reset
c34baab mt7603: add missing unlock in case changing the channel fails
ac6fc78 mt7603: add debugfs file to trigger watchdog resets
d9b5324 mt7603: add SPDX license identifiers
498d716 mt7603: fix checkpatch issues
a1afefd mt7603: fix handling of fixed rate packets
5ee0523 mt7603: fix tx status rate reporting for fixed-rate packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Felix Fietkau
b318edb999 ramips: add missing DTS frequency limit for the 5 GHz radio on Archer C20i
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Koen Vandeputte
7e173b4331 valgrind: bump to 4.14.0
Release notes can be found here:

http://www.valgrind.org/docs/manual/dist.news.html

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 16:34:47 +01:00
Koen Vandeputte
c5bf408ed6 ramips: fix image generation for mt76x8
Buildbot fails to generate images for targets also generating a
Sercomm binary with following error:

Opening file: /mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img.rootfs.zip
Filesize: 3648606 .
mksercommfw: malloc.c:2427: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed.
Makefile:287: recipe for target '/mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img' failed

Debugging using valgrind shows stack corruption due to a buffer overflow.
The author of the generator assumes the filename ends with "root",
while it should be "rootfs".

Fix this by accounting for the 2 missing characters which solves the build issues.

More work is required to cleanup this source, which will be done later on.

Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 15:29:51 +01:00
Koen Vandeputte
74738c4b80 imx6: fix DMA transaction errors
Following errors were seen in the past on imx6 when using serial:

[ 22.617622] imx-uart 2020000.serial: DMA transaction error.
[ 22.623228] imx-uart 2020000.serial: DMA transaction error.
[ 22.628826] imx-uart 2020000.serial: DMA transaction error.
[ 22.648951] imx-uart 2020000.serial: DMA transaction error.
[ 22.654558] imx-uart 2020000.serial: DMA transaction error.
[ 22.660156] imx-uart 2020000.serial: DMA transaction error.

Which is the reason why DMA for the serial ports
got disabled in commits:

efb362cd93 ("imx6: disable dma on uart")
3b4241071d ("imx6: disable UART dma")

As indicated on mailinglist discussion, the cause seems to be
the usage of very old SDMA firmware which is present in the soc:

[    0.624302] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[    0.624318] imx-sdma 20ec000.sdma: Falling back to user helper
[   64.531607] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware

This patch adds the new firmware binary. (2196 bytes)

It is required to embed the binary into the kernel image, as it
gets loaded very early in the boot process where the rootfs is not
available yet:

[    0.622966] imx-sdma 20ec000.sdma: loaded firmware 3.3

Extended testing shows that the DMA errors are not seen anymore
when using this newer firmware version.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Koen Vandeputte
5ac34818f9 ath9k: fix dynack in IBSS mode
Currently, dynack was only tested upstream using AP/STA mode.
Testing it on IBSS, showed that late-ack detection was broken.

This is caused due to dynack using Association Request/Response
frames for late-ack detection, which IBSS does not use.
Also allowing Authentication frames here solves this.

A second issue also got fixed, which was also seen AP/STA mode:

When a station was added, the estimated value would be exponentially averaged
using 0 as a starting point.

This means that on larger distances, the ack timeout was still not high
enough before synchronizing would run out of late-ack's for estimation.

Fix this by using the initial estimated value as a baseline
and only start averaging in the following estimation rounds.

Test setup:
- 2x identical devices:  RB912UAG-5HPnD + 19dB sector
- IBSS
- 2x2 802.11an (ar9340), HT20, long GI
- RSSI's  -70 / -71
- Real distance: 23910 meter

Results (60s iperf runs):

Fixed coverage class 54 (up to 24300m):
* 21.5 Mbits/sec

Dynack:
* 28.9 Mbits/sec

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Koen Vandeputte
860de2e1aa ar71xx: disable some tiny targets with kernel 4.14
The bump to kernel 4.14 caused a massive increase in kernel size.

For most targets, switching them to dynamic partitioning allowed
to cope with this.

On some targets, the kernel partition is located behind the rootfs,
which disallows switching to dynamic partitioning as the boot location
would be altered, requiring a u-boot change.

Also within the tiny section, which disables kernel symbols etc
to decrease the image size,  the partition size is still too small.

Disable these targets for now, fixing image generation:

- Buffalo BHR-4GRV2
- Zbtlink ZBT-WE1526

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:06 +01:00
Koen Vandeputte
c764b2b531 kernel: bump 4.14 to 4.14.79
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:00 +01:00
Hans Dedecker
69734416d2 glibc: update to latest 2.27 commit (BZ#23709,BZ#23822)
d8eee5ef55 x86: Fix Haswell CPU string flags (BZ#23709)
5cd5309d91 i64: fix missing exp2f, log2f and powf symbols in libm.a [BZ #23822]
1759ea197b conform: XFAIL siginfo_t si_band test on sparc64

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-05 14:22:17 +01:00
Hannu Nyman
f1ed7747bb tools/bison: update to version 3.2
Update bison to version 3.2

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-11-05 14:04:26 +01:00
David Bauer
5896b146a4 ipq40xx: fix NBG6617 LED mapping
The NBG6617's LEDs are wrongly identified in the 01_leds boardinit
script (board instead of boardname), resulting in referencing
non-existent LEDs in UCI.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-05 02:30:00 +00:00
Daniel Golle
9bcc08958b oxnas: add console=ttyS0,115200 argument to bootargs
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:37 +01:00
Daniel Golle
cf7896117b oxnas: enable image metadata by setting SUPPORTED_DEVICES
For each board, set the legacy name as well as the new based on the
compatible-string from devicetree.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:37 +01:00
Daniel Golle
ef9b169df0 oxnas: remove stray kernel config symbols
CONFIG_CRYPTO_* shouldn't be set by the target

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:36 +01:00
Daniel Golle
4f017c871d oxnas: switch to generic board detect
remove /lib/oxnas.sh platform-specific board-detection and use
generic which is based on device-tree compatible node instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:36 +01:00
Alexander Couzens
900005ee75
iperf: allow non-ipv6 builds
Add configure argument --disable-ipv6 when ipv6 is deselected.
Add fix-non-ipv6-builds.patch as long there is no new upstream
release.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-11-03 02:36:24 +01:00
Martin Weinelt
0411813c6f
ramips: fix leds on GL.iNet GL-MT300N-V2
The WAN LED now shows the link state. It's color is green,
not blue.

Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
2018-11-02 21:43:15 +01:00
Hans Dedecker
c9f5934c71 curl: noop commit to refer CVEs fixed in 7.62.0
When bumping Curl to 7.62.0 in commit 278e4eba09 I did not include the fixed
CVEs in the commit message; this commit fixes this.

The following CVEs were fixed in 7.62.0 :

CVE-2018-16839
CVE-2018-16840
CVE-2018-16842

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-02 13:16:13 +01:00
Christian Lamparter
dceee8cc09 ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00
Christian Lamparter
8b18fce3b8 ipq40xx: nbg6617: switch to upstream boardfile variant
The NBG6617's boardfile was merged and this device can
now switch to the upstream ath10k board-2.bin.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00
Christian Lamparter
575d0240f9 ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:52 +01:00
Christian Lamparter
6840f15a16 ipq40xx: rt-ac58u: replace ubi auto load hack
This patch replaces the custom autoload quirk of the
RT-AC58U with a bootargs-append overwrite.

The vendor's u-boot doesn't leave the bootargs / cmdline alone,
so the it can't be overwritten in any other way right now...
And of course, this will be a lot of fun to deal with once
the device switches to the new spi-nand subsystem.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:52 +01:00
Rosen Penev
8fc187a76e kernel: Remove dependencies on old kernels
Kernels 4.1 and 4.4 are not part of the tree anymore.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-11-01 17:16:52 +01:00
Rosen Penev
32fc41baab tools/patch: Add fedora patch for crashing git style patches
https://lists.gnu.org/archive/html/bug-patch/2018-10/msg00000.html

I assume a CVE number will be assigned soon.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-11-01 17:16:52 +01:00
Daniel Engberg
f9a408b75e libconfig: Fix tarball filename (and URL)
v$(PKG_VERSION).tar.gz is a bad idea and will clash for obvious reasons.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-01 17:16:52 +01:00
Hauke Mehrtens
3361a8817e scripts: update config.guess and config.sub
This updates these two files to commit 2fa97a8a0ed3 ("config.guess
(amd64:CYGWIN*:*:*, x86_64:CYGWIN*:*:*): Set master") which is the
current master of
https://git.savannah.gnu.org/gitweb/?p=config.git;a=summary

This contains updates for multiple architectures and will unbreak the
build on the x32 ABI.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-01 17:16:52 +01:00
Thorsten Glaser
a395563f68 build: fix libressl build on x32 (amd64ilp32) host
disable use of assembly code since x32 gets misdetected as amd64

Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
2018-11-01 17:16:52 +01:00
Michael Heimpold
79b766d07d uboot-mxs: bump to v2018.09
Also update the U-Boot BSP patch for I2SE Duckbill devices
and remove upstreamed patch for LibreSSL support.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-11-01 17:16:52 +01:00
Hannu Nyman
b0a2e60793 tools/ccache: update to 3.5
Update ccache to 3.5

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-11-01 13:49:52 +01:00
Kabuli Chana
390158bd2b mwlwifi: update to version 10.3.8.0-20181029
compile / test target mvebu / mamba

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2018-11-01 13:48:49 +01:00
Thomas Fuzeau
87e1894d59 kernel: add kmod-usb-serial-mos7840
Enable build of kernel module for mos7840 usb-serial devices.

Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
2018-11-01 13:44:48 +01:00
Hans Dedecker
278e4eba09 curl: bump to 7.62.0
Refresh patches, for changes in version 7.62.0 see https://curl.haxx.se/changes.html#7_62_0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-31 23:06:42 +01:00
Matthias Schiffer
dd9da51462
openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build dep
Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some
situations it may happen that libunbound and openssl are only pulled in as
build dependencies, but are not enabled in .config.

In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are
ignored (as the whole symbol depends on PACKAGE_libopenssl), and config
symbol dependencies of libunbound aren't effective either (as libunbound
is not actually enabled).

This commit works around the issue by introducing a hidden negated symbol
OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is
disabled, and ensures that OpenSSL is built with deprecated APIs in this
case. A user can still manage to break the build by explicitly enabling
libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between
build dependencies and config symbols will require further discussion.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-10-30 20:38:34 +01:00
Kevin Darbyshire-Bryant
3dba852547 dnsmasq: tighten config file permissions
Install following as config files (600) perms instead of as data (644)

/usr/share/dnsmasq/dhcpbogushostname.conf
/usr/share/dnsmasq/trust-anchors.conf
/usr/share/dnsmasq/rfc6761.conf
/etc/hotplug.d/ntp/25-dnsmasqsec
/etc/config/dhcp
/etc/dnsmasq.conf

dnsmasq reads relevant config files before dropping root privilege and
running as dnsmasq:dnsmasq

ntpd runs as root so the hotplug script is still accessible

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-30 09:25:32 +00:00
Koen Vandeputte
162e016fed ar71xx: expand kernel size for ubnt targets
Kernel 4.14 is pretty large causing a build error as the partition is too small.
Expand the kernel partition a bit to make it fit.

* ubnt-uap-pro
* ubnt-unifi-outdoor-plus

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-29 16:20:47 +01:00
Koen Vandeputte
d6b63f1698 ar71xx: disable ap91-5g due to kernel size
This target causes a build failure as the kernel image does not fit
into the kernel partition.

As the kernel is located behind the rootfs, it cannot be enlarged
as the boot entry location would get altered.

Disable this target for now.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-29 16:20:47 +01:00
Koen Vandeputte
f3b80c36bb ar71xx: fix sysupgrade generation for some targets
These targets are already defined as having a dynamic partition
but the safeloader was not adapted for them.

This causes a build warning for the sysupgrade image being too big.

Targets:
- c58-v1
- c60-v1
- c60-v2
- TL-WR1043 v5
- TL-WR902AC v1
- TL-WR942N V1

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-29 11:21:23 +01:00
Koen Vandeputte
7c78be1b74 ar71xx: switch more targets to dynamic partitioning
Targets:
- TP-LINK ER355
- TP-LINK C25 V1
- TP-LINK C59 V1
- TP-LINK C7 V4
- TP-LINK C7 V5

Fixes build issues seen due to the kernel being too big

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-29 11:21:23 +01:00
Radek Dostál
9d35b68776 ar71xx: switch TP-Link RE450 v1 to dynamic partitioning
As mentioned in commit 5f24933 recent changes on ar71xx (switch to 4.14,
memory compaction, ...) cause an increase in kernel size, making it too
big for RE450.

RE450 images were not build due to the following error message:
os-image partition too big (more than 1572864 bytes): Success

Tested on RE450, device boots and was used to send this patch.

Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Suggested-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Radek Dostál <rd@radekdostal.com>
[rewrote commit msg keeping it tight + fixed SoB lines]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-29 11:21:23 +01:00
David Bauer
f89fc43a50 ar71xx: move OCEDO Koala to generic and use dynamic partitioning
This changes the OCEDO Koala flash-layout to a unified firmware
partition, thus making the ar71xx-generic kernel fit in flash.

Compile and runtested on OCEDO Koala.

Signed-off-by: David Bauer <mail@david-bauer.net>
[small title reword]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-29 11:21:23 +01:00
Mathias Kresin
374e646724 ath79: fix PQI Air Pen support
Use the correct dts filename. It has to be <soc>_<manufacturer>_<device>.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-28 11:03:49 +01:00
YuheiOKAWA
27eae6597e ath79: add support for PQI Air Pen
SoC: AR9330 (or AR9331 revision?)
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.

Flash 8MiB. (factory is dual image)
1. write image is use half 4MiB size from factory.
  write initramfs image to mtd6 and mtd7.
2. change next boot setting. next is mtd6 boot.
  echo -ne "\x01" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0

3. rewrite sysupgrade image.
  change next boot setting. next is mtd4.
  echo -ne "\x00" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0

OEM mtd.
dev:    size   erasesize  name
mtd0: 00040000 00010000 "u-boot"
mtd1: 00010000 00010000 "u-boot-env"
mtd2: 00010000 00010000 "ART"
mtd3: 00010000 00010000 "NVRAM"
mtd4: 00140000 00010000 "uImage"
mtd5: 00280000 00010000 "rootfs"
mtd6: 00140000 00010000 "uImage2"
mtd7: 00280000 00010000 "rootfs2"
mtd8: 00010000 00010000 "CONF"

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
2018-10-28 10:59:14 +01:00
Roger Pueyo Centelles
23f9b2d9a9 ath79: Add support for Ubiquiti LiteAP ac (LAP-120)
This commit adds support for the Ubiquiti LiteAP ac (LAP-120), an outdoor
5 GHz AC access point with an integrated 120° 16 dBi antenna. The device
was previously known as LiteBeam AP ac but was later rebranded.

CPU:    Atheros AR9342 SoC
RAM:    64 MB DDR2
Flash:  16 MB NOR SPI
Ports:  1 GbE port (PoE in)
WLAN:   5 GHz QCA899X (PCI)

The integrated QCA899X is a Ubiquiti branded part with modified vendor
and product id (0777:11ac9). It is very similar to the NanoStation loco
AC, except for the 2.4 GHz management radio (missing here).

Installation procedure is the same as the NanoStation [loco] AC:

1. Connect to serial header on device
2. Power on device and enter uboot console
3. Set up tftp server serving an openwrt initramfs build
4. Load initramfs build using the command tftpboot in the uboot cli
5. Boot the loaded image using the command bootm
6. Copy squashfs openwrt sysupgrade build to the booted device
7. Use mtd to write sysupgrade to partition "firmware"
8. Reboot and enjoy

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2018-10-28 10:59:09 +01:00
Felix Fietkau
8edce6014a mt76: update to the latest version
fdc63f1 mt76: fix regression in tx status handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-27 17:54:37 +02:00