Commit graph

8946 commits

Author SHA1 Message Date
Luka Perkov
350dd0f9ac kobs-ng: Add support for overriding size
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams.
This patch allows overriding that size in order to reserve space at the end
of the mtd partition for u-boot.img in the case of using an SPL bootloader.

For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000
(14MB) offset in a 16MB /dev/mtd0:

  kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL
  nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40532
2014-04-19 21:39:09 +00:00
Felix Fietkau
3c95232ab7 netifd: update to the latest version, fixes some more issues related to l3_dev handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40529
2014-04-19 09:58:40 +00:00
Felix Fietkau
a423055592 base-files: remove duplicate wps button handler (#15621)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40528
2014-04-18 17:27:38 +00:00
Jo-Philipp Wich
7bfcbab875 fstools: fix extroot with opkg-installed block-mount (#15550)
The /sbin/block binary now requires and additional shared library, therfore set
LD_LIBRARY_PATH accordingly when invoking it from the temporary overlay.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 40526
2014-04-17 17:59:47 +00:00
John Crispin
13010f3adc lantiq: remove uboot lzma patch, apparently its not needed after all
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40521
2014-04-16 12:11:24 +00:00
John Crispin
69bac3e37e uboot-lantiq: backport lzma fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40520
2014-04-16 12:01:24 +00:00
Steven Barth
ba6689b064 ds-lite: disable NAT according to RFC 7084
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 40511
2014-04-14 10:11:54 +00:00
Steven Barth
daf69ee1da firewall: add support for nat-rules and netifd-proto-originating rules
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 40510
2014-04-14 10:11:34 +00:00
Felix Fietkau
4d0f5b36c4 iw: sync nl80211.h (fixes settting antenna_gain)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40503
2014-04-13 09:53:51 +00:00
Gabor Juhos
daca4351b1 uboot-envtools: add support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40501
2014-04-13 08:29:08 +00:00
John Crispin
3bc77db5f5 802.11s: fix authsae support in netifd
This patch implements support for 802.11s protected mesh wireless networks (using authsae) in the netifd framework.

Until meshd-nl80211 implements a proper -P option for the PID file, this uses shell backgrounding in order to be able to get the PID for the process.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 40497
2014-04-12 21:22:17 +00:00
John Crispin
fca3f32fe8 rpcd: update to the latest version
This is required to make object "session" procedure "access" dump ACLs
when no "object" or no "function" parameters are passed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40496
2014-04-12 21:22:12 +00:00
John Crispin
3269f57c58 uboot-lantiq: enable parallel building
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40488
2014-04-12 21:21:40 +00:00
John Crispin
dcbaee4e77 uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40487
2014-04-12 21:21:35 +00:00
John Crispin
28fcb00b44 uboot-lantiq: add packages for AudioCodes MP-252
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40486
2014-04-12 21:21:31 +00:00
John Crispin
dcf6f0e3f8 uboot-lantiq: add packages for various Arcadyan boards
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40485
2014-04-12 21:21:26 +00:00
John Crispin
b949a631fe uboot-lantiq: add packages for Lantiq EASY80920
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40484
2014-04-12 21:21:23 +00:00
John Crispin
de21f63d4a uboot-lantiq: add packages for Lantiq EASY50712
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40483
2014-04-12 21:21:18 +00:00
John Crispin
1246dce0b3 uboot-lantiq: update to v2013.10
Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40482
2014-04-12 21:21:14 +00:00
Felix Fietkau
d80333bae3 kernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40470
2014-04-12 15:43:17 +00:00
Felix Fietkau
0d7e8ba3a9 hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)
r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but
apparently did not provide a default value 0.

When that option's non-existing value is later evaluated in
/lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in
syslog if user has not set the wps_pbc_in_m1 option. The error materialises
only if user has enabled wps.
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number

Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3

Error is caused by line 282:
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282

My patch sets the parameter's default value to 0, which does nothing. The
default might also be set a bit later in the function, but this felt like the
most clear place to do that.

Signed-off-by hnyman <hannu.nyman@iki.fi>

SVN-Revision: 40469
2014-04-12 14:28:34 +00:00
John Crispin
390e856cb2 lantiq: more vdsl related cleanups
* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40460
2014-04-11 20:40:24 +00:00
Felix Fietkau
7b960069a2 netifd: switch to using git.openwrt.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40459
2014-04-11 20:28:55 +00:00
Jo-Philipp Wich
38c4e4cc02 uci: fix import with not yet existing packages, preserve config permissions on commit, fix Lua detection in cmake
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 40458
2014-04-11 16:14:09 +00:00
Jo-Philipp Wich
e0a3e3d1b6 uhttpd: do not attempt to configure Lua handler if referenced file does not exist
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 40457
2014-04-11 16:13:27 +00:00
Felix Fietkau
92ab194d63 netifd: update to latest version, adds a force_link parameter to bring up an interface without active device carrier
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40456
2014-04-11 13:48:41 +00:00
Felix Fietkau
a28b8ecc47 netifd: update to the latest version, fixes some reload issues with proto=static
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40449
2014-04-10 15:21:13 +00:00
Felix Fietkau
c5967446ba kernel: add a dependency of kmod-r8169 on r8169-firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40448
2014-04-10 14:43:33 +00:00
Felix Fietkau
d589d40294 linux-firmware: add a new package for firmware (currently only builds r8169 firmware)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40447
2014-04-10 14:43:30 +00:00
Felix Fietkau
8a7a02bd2e netifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)
Fixes #15504

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40443
2014-04-10 11:31:21 +00:00
Felix Fietkau
134c036fc9 mac80211: add back missing tx power handling fix (#12750)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40440
2014-04-10 08:52:33 +00:00
John Crispin
eebc673f1e lantiq: move the dsl-modem config to network.@dsl-modem[-1]
make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40439
2014-04-10 08:14:33 +00:00
John Crispin
8bfe9acecf lantiq: vdsl init.d script should auto start
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40438
2014-04-09 16:36:28 +00:00
John Crispin
76e873a289 lantiq: cleanup vdsl driver bringup
config interface 'wan'
	# a, b, j
	option annex b
	# a, b, av, bv
	option tone b
	# vdsl.bin
	option firmware
	# atm, ptm
	option xfer_mode atm

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40437
2014-04-09 16:31:24 +00:00
Steven Barth
9efa78ebeb odhcpd: use correct defaults for interfaces not in UCI
SVN-Revision: 40435
2014-04-09 12:29:43 +00:00
Steven Barth
d2d8970828 odhcp6c: fix recovering from status where all addresses have been lost
SVN-Revision: 40432
2014-04-09 06:57:04 +00:00
Felix Fietkau
f95990a73b mac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40430
2014-04-08 22:11:27 +00:00
Felix Fietkau
26b8bb6150 mac80211: fix user antenna gain calculation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40429
2014-04-08 22:11:23 +00:00
Felix Fietkau
fe2c9b4e1d ath9k: fix AP mode crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40428
2014-04-08 22:11:19 +00:00
Felix Fietkau
b8795d6b66 ath9k: fix some ANI related stability issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40427
2014-04-08 22:11:13 +00:00
Felix Fietkau
dd58e15b84 base-files: add back missing function for find_mtd_part to /lib/functions.sh (fixes #15496)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40426
2014-04-08 21:17:49 +00:00
Steven Barth
4abcae7a1c ds-lite: compatibility with ISPs that only offer public PDs
SVN-Revision: 40422
2014-04-08 06:19:37 +00:00
Steven Barth
8333ce1963 OpenSSL: update to 1.0.1g
This fixes the Heartbleed bug (CVE-2014-0160).

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 40421
2014-04-08 05:24:36 +00:00
John Crispin
665d39f698 base-files: the ubi tol should be installed when jumping to ram_fs
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40420
2014-04-07 15:35:20 +00:00
John Crispin
1d5ac95850 base-files: make use of new fstools
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40416
2014-04-07 15:10:15 +00:00
John Crispin
eb19a65bd2 fstools: update to latest git HEAD
this adds the /sbin/ubi tool that can be used for sysupgrading ubi volumes

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40415
2014-04-07 15:10:07 +00:00
Felix Fietkau
255546bbfd netifd: update to the latest version, fixes a l3_dev handling regression leading to a crash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40414
2014-04-07 11:12:06 +00:00
Felix Fietkau
28f4f4a6d7 /lib/functions.sh: remove config_rename()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40412
2014-04-07 10:29:51 +00:00
Felix Fietkau
4a9ea80ef0 /lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40411
2014-04-07 10:29:47 +00:00
Felix Fietkau
e700dcaf04 /lib/functions.sh: remove jffs2_mark_erase()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40410
2014-04-07 10:29:42 +00:00