Mathias Kresin
abfdddfb3c
lantiq: VG3503J - use the 11G firmware
...
Use the 11G firmware for the phys as the oem firmware does.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:25 +02:00
Mathias Kresin
9d0608eef3
lantiq: VG3503J - merge profiles
...
The only difference between the VG3503J profiles is the version of the
gphy firmware that gets loaded. This can be handled perfect fine in one
device tree source file.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
e81acacaa3
uboot-lantiq: ARV752DPW - use correct switch driver
...
There is no RTL8206 switch driver.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
a22feb4c78
uboot-lantiq: VGV7510KW22 - use ddr ram params from brnboot
...
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
382282eca9
uboot-lantiq: VGV7510KW22 - use leds to indicate boot status
...
Switch on the red power led if kernel image can't be loaded. Otherwise
switch the green led on.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
9e8edcff99
uboot-lantiq: VGV7510KW22 - cleanup board config
...
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.
The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.
Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
b3795d0c93
uboot-lantiq: reorder and rework patches
...
use:
- 00nn for u-boot patches
- 01nn for new boards
While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
74b1687be3
uboot-lantiq: drop unused board patches
...
None of the boards is supported by lede. No need to keep the patches in
the lede tree.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
21bdd79b33
lantiq: disable phy led complex (test) functions by default
...
They can be added using the phy led device tree bindings if required.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:23 +02:00
John Crispin
9e41c3f54e
imx6: move profile definitions to the image/Makefile
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:23 +02:00
Cezary Jackiewicz
2965430999
ramips: cleanup for Hame MPR-A2
...
- disable all ethernet ports except port 0 on MPR-A2
Port 0 is the only ethernet port on this router, so disable all other PHYs in order to save power.
- don't use a VLAN for the single ethernet port of the MPR-A2
Like A5-V11, this router only has one ethernet port.
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-05-23 11:03:23 +02:00
John Crispin
31293752c8
mdns: update to latest git HEAD
...
* fixes loopback handling
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 10:26:32 +02:00
Felix Fietkau
e00770f093
image.mk: fix profile selection in the image builder
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 19:51:00 +02:00
Felix Fietkau
df98acc6a1
mvebu: backport upstream ethernet driver improvements and enable buffer manager support
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 16:04:37 +02:00
Felix Fietkau
e90245237c
oxnas: use global UBIFS_OPTS, all profiles use the same settings
...
Fixes build when selecting a device profile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 15:58:41 +02:00
Felix Fietkau
2c9c998b4a
mwlwifi: remove the a-mpdu failure messages entirely instead of hiding them in the debug log
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 15:51:21 +02:00
Felix Fietkau
848cacb21d
mvebu: fix device I/O coherency issues
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 12:34:06 +02:00
Felix Fietkau
638a5682e1
kernel: remove bogus CONFIG_LOG_BUF_SHIFT overrides
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:35:41 +02:00
Felix Fietkau
a080b10331
mvebu: correct patch name of the crypto sram fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:32:30 +02:00
Felix Fietkau
629636dd25
mvebu: fix bus ranges for the crypto processor sram
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:06:46 +02:00
Felix Fietkau
7ae6b912ae
libpcap: set a static default for PCAP_HAS_USB
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 20:02:10 +02:00
Felix Fietkau
22cc151e93
mvebu: tune kernel config for performance
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:07 +02:00
Felix Fietkau
f849c2c832
mvebu: enable core drivers in the kernel config instead of packaging them
...
Simplify profile package selection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:06 +02:00
Felix Fietkau
a5a3b59bf5
mvebu: add some more flash driver fixes
...
Disable marvell,nand-keep-config property on WRT1900AC to allow the
flash driver to properly probe the chip
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
008579f2ff
mvebu: rename recently added flash driver fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
4926e4b1ae
mwlwifi: fix excessive logspam if starting a BA session fails
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
29ad4d2a0c
mwlwifi: fix excessive use of busy-waiting that was tripping up the flash driver
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
ab5e07f731
mwlwifi: update to 10.3.0.17-20160520-1
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
f0dd81043c
mvebu: prevent crash in the flash driver in case of a spurious interrupt
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:38 +02:00
Felix Fietkau
566343246f
mvebu: backport an upstream NAND flash driver fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:38 +02:00
Felix Fietkau
5166732a4e
ramips: use green power LED as status indicator for Buffalo WSR-1166 and WSR-600
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:37 +02:00
Felix Fietkau
80bb5adf98
build: allow whitespace characters in VERSION_DIST
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 13:57:26 +02:00
Felix Fietkau
b570c0c88e
uhttpd: use configured distribution name for SSL certificate CN
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 12:42:44 +02:00
Felix Fietkau
72568ea3bd
ar71xx: remove linux 4.1 support
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 10:02:29 +02:00
Dirk Neukirchen
de27a1adae
cyassl/wolfssl: update to 3.9.0
...
wolfssl has a fine grained feature and compatibility control
for compiling stunnel, lighthttp or (partly) openssl dropin
ustream-ssl uses features that require normally
HAVE_SNI, HAVE_STUNNEL and the openssl compatibility headers
ar71xx ipkg sizes of wolfssl 3.9.0:
- with stunnel: 144022
- this patch (w.o. stunnel): 131712
- without openssl(extra): 111104
- w.o openssl/sni:108515
- w.o openssl/sni/ecc: 93954
so patch 300 saves around 12k compressed ipkg size
v2: keep & rename patch 300 for clarity, fixes ustream-ssl/cyassl
that broke with v1
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-21 09:57:12 +02:00
Felix Fietkau
48ff6eff8c
mac80211: add missing config symbols to PKG_CONFIG_DEPENDS
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 00:11:55 +02:00
Rafał Miłecki
1050a609cf
nvram: install init.d quirks script on brcm47xx only
...
It contains some quirks for old MIPS devices.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-20 22:33:15 +02:00
Álvaro Fernández Rojas
8998dc14a5
brcm2708: fix SUBTARGET checks for bcm2709/bcm2710
...
This regression was introduced in commit cf58007a
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-20 19:07:36 +02:00
Felix Fietkau
24b8d31bad
mvebu: update to linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:38:10 +02:00
Felix Fietkau
8eab383782
mvebu: fix portability issues in the image makefile code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:38:10 +02:00
Felix Fietkau
0d476971f2
kernel: define CONFIG_CPU_THERMAL in kmod-thermal
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:38:09 +02:00
Felix Fietkau
d01487e380
image.mk: simplify device profile check, prepare for supporting selecting multiple profiles
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:37:52 +02:00
Felix Fietkau
c4ae33b048
image.mk: fix evaluation order for image profile check
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:37:52 +02:00
Felix Fietkau
cf58007abc
bcm2708: explicitly check for SUBTARGET instead of using the device SUBTARGETS variable
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:37:52 +02:00
Felix Fietkau
c115058669
libubox: update to the latest version
...
adds a SIGCHLD handling fix and jshn performance improvements
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:37:52 +02:00
Felix Fietkau
323d37cbb6
arm64: update to linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:25:41 +02:00
Felix Fietkau
647e6379af
kernel: add missing config symbols for 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:25:40 +02:00
Felix Fietkau
82dcbec727
ramips: remove fake vlan rx offload from ethernet driver
...
The network stack does not need it to do GRO
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:01:21 +02:00
Alexander Couzens
94e23bf740
ar71xx/cpe510: enable LNA for CPE210/220/510/520
...
The LNA improves the rx path. Within a simple test setup
it improved the signal from -60dbm to -40dbm.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-20 13:18:57 +02:00
Daniel Golle
118b5ae7b2
oxnas: drop compatibility with old kernels from mach-ox820
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-20 08:48:19 +02:00