* fix up the order of respawn parameters for ubus
* add a event broadcast function
* add debug level handover between preinit and main process
* make the service running trigger be queued directly after the service was startetd
* Allow process respawning forever
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38868
This patch fixes the NAPI poll mechanism in the GIANFAR ethernet driver, which
was not properly working since Linus Kernel Version 3,8.
Therefore the workaround patch to downgrade the GIANFAR ethernet driver to
Kernelversion v3.8 is obsoete.
This patch was extensivly testes with different network loads and types of
traffic. There is quite a substantial user base that reports proper Ethernet
function with TPlink-4900. This patch is based on the fixes from GINAFAR
maintainer Claudiu Manoli.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38865
A small system like the common home router doesn't have 40 MiB per process for
a dirty stack cache. This can easily lead to an overbooking OOM problem and
caused a lot of hangs+reboots on 32 MiB systems running nodogsplash.
Not using a stack cache can increase the time to spawn new threads. This is
hopefully no problem for system not running a lot of parallel computations.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 38851
- instead of writing one (or more) ACCEPT rules in the filter table
for each redirect install a global ctstate DNAT accept rule per zone
- discard rules and redirects which have invalid options set instead
of silently skipping the invalid values
SVN-Revision: 38849
move xfsprogs to the right submenu
e2fsprogs, btrfs-progs and other stuff is there already
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 38838
Current version of ath10k in the recently updated wireless-testing
package requires a new firmware. This patch fixes the issue.
v2:
* fix (hopefully) the mangled whitespaces
* actually install the new firmware instead of the old
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 38835
get_cycles() is used in some places as one part of the seed for the
kernel PRNG.
This backports the following commit from mainline linux kernel:
9c9b415c50bc298ac61412dff856eae2f54889ee
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38834
This patch was copied from a more recent backports versions. This fixes
a build problem with kernel < 3.6.
This closes#14475
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38833
move log service from procd to ubox
some debloating on procd
the preinit part of procd is now also a seperate binary
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38822
The correct bits are now cleared in the IPv6 address as the shift
value to the correct byte in the IPv6 address was wrong. Depending
on the stack values this could result in a hanging 6rdcalc program
due to an endless loop.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 38818
Patch to add the profile for the TP-LINK WR842N/ND v2
Small update, because of a change in the Makefile.
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4382/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38815
Patch to add the user space support for the TL-WR842N/ND v2
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4354/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38814
Get the factory assigned mac addresses stored in the caldata
partition and asign them to lan and wan interfaces. Also put
the correct mac addresses into the WiFi eeprom files to ensure
that the ath9k driver will use the correct ones.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Patchwork: http://patchwork.openwrt.org/patch/4350/
[juhosg:
- move WiFi MAC address setup to the firmware hotplug file,
- use the official MAC address for the 2.4GHz as well,
- remove uci-defaults.sh modifications,
- update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38812
RIPEMD is needed to update erlang and i'd like to enable RIPEMD160 support in openssh.
Size compared:
openssl without RIPEMD/160 support:
647K 29. Okt 20:00 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk
openssl with RIPEMD/160 support:
652K 8. Nov 15:11 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk
So the file size just grows ~5kb, which shouldn't be a problem.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
SVN-Revision: 38809
The current implementation of mtd will not append the backup
file created by sysupgrade to the correct partition, as mtd will append
the data to first jffs2 partition it finds. As the kernel is also
stored on a jffs2 partition (which resides before the overlay
partition), the data will be appended to this partition.
To fix this problem, a new option
-s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"
is added to mtd.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
SVN-Revision: 38807
