Commit graph

28 commits

Author SHA1 Message Date
Florian Fainelli
8ea5e19823 targets: fix remaining targets for initramfs builds
Fix some bugs that slipped through while making initramfs non exclusive.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37079
2013-06-28 22:56:34 +00:00
Felix Fietkau
6d6296e214 orion: add support for the lacie 2big network device
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37059
2013-06-28 11:26:29 +00:00
Imre Kaloz
799bdc990a there's no reason to have these generic files in the bin dir either
SVN-Revision: 36852
2013-06-05 06:46:41 +00:00
Imre Kaloz
28e8b8dc05 only copy uImages to the bin dir on ramdisk builds
SVN-Revision: 36851
2013-06-05 06:17:12 +00:00
Imre Kaloz
e161581d45 don't copy the zImages to the bin dir, factory u-boots can't use them
SVN-Revision: 36850
2013-06-05 06:04:48 +00:00
Imre Kaloz
58fa46c90c drop support for the dns323
SVN-Revision: 36832
2013-06-04 11:13:18 +00:00
Imre Kaloz
8e49dfe68a the uImage's filename will hardly change
SVN-Revision: 33985
2012-10-29 09:55:20 +00:00
Imre Kaloz
1a4f117398 rename erase size variables
SVN-Revision: 33964
2012-10-27 10:50:55 +00:00
Imre Kaloz
549d5a6e34 add support for Netgear WN802T
SVN-Revision: 33963
2012-10-27 10:48:22 +00:00
Florian Fainelli
25792cb971 generic: enhanced image Makefile
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use

Signed-off by: Matthias Buecher <mail@maddes.net>

SVN-Revision: 33174
2012-08-13 14:46:47 +00:00
Florian Fainelli
930a820172 update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31199
2012-04-04 16:06:25 +00:00
Florian Fainelli
b47fc0f936 add support for D-Link DNS-323
this patch adds support for D-Link DNS323 storage device.
You can find more info here:

http://dns323.lukaperkov.net/

Currently you need serial cable to flash OpenWrt on DNS-323.

Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >

SVN-Revision: 31198
2012-04-04 15:53:55 +00:00
Alexandros C. Couloumbis
4ec905f3c9 target/linux/orion: create subtargets (closes #8154)
SVN-Revision: 23883
2010-11-04 22:10:11 +00:00
Florian Fainelli
b2cb720494 fix Freecom DT2 jffs2 rootfs generation issue (#7584)
SVN-Revision: 22585
2010-08-10 20:13:49 +00:00
Florian Fainelli
bea34111cc fix jffs2 128k image generation, patch from madddes (#7584)
SVN-Revision: 22580
2010-08-10 16:13:01 +00:00
Nicolas Thill
e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
Travis Kemen
3c5ca326ec Update to v2.2 fixed checksum byte calculation for other versions than 0x2019 fixed rare problem with padsize updated info to stock firmware 2.00.20 fixed typos
Signed off by: Matthias Buecher <mail@maddes.net>

SVN-Revision: 19683
2010-02-17 02:18:13 +00:00
Travis Kemen
cb9c37af38 Update to v2.1 Stays closer to the stock firmware by using wrt350n.bin for the created image. Adds the possibility to create the image in two separate steps (-b / -z). Makefiles now support the possibility to include a u-boot image for a 100%-stock-like image.
Signed off by: Matthias Buecher <mail@maddes.net>

SVN-Revision: 19596
2010-02-12 01:40:57 +00:00
Jo-Philipp Wich
82e1ed603f missing prerequisite for Orion images Webupgrade image building for WRT350Nv2 needs zip package. Copy command for WRT350Nv2 recovery image overrides error code of webupgrade builder, moved behind brackets. Removed indention of comments to avoid output in log. Signed-off by: Matthias Buecher <mail@maddes.net>
SVN-Revision: 19183
2010-01-17 13:50:10 +00:00
Felix Fietkau
62d2ed2657 build wrt350n v2 recovery and web upgrade images (based on patch from #5970)
SVN-Revision: 18763
2009-12-12 00:45:32 +00:00
Felix Fietkau
7f63e704b3 orion: fix image build on non-linux systems
SVN-Revision: 16938
2009-07-21 02:30:46 +00:00
Rod Whitby
f11f903b61 orion: Added initial support for Freecom DT2. Thanks to Zintis.
SVN-Revision: 14963
2009-03-22 12:38:24 +00:00
Imre Kaloz
88dcf36525 generate webuploadable image for the wnr854t
SVN-Revision: 11589
2008-06-27 12:19:20 +00:00
Imre Kaloz
a425a7506c add preliminary Netgear WNR854T support
SVN-Revision: 11582
2008-06-26 13:53:27 +00:00
Imre Kaloz
50f6031afc generate orion images differently
SVN-Revision: 11576
2008-06-25 22:41:50 +00:00
Imre Kaloz
e147bf8fa3 fixup machid workaround, generate uImage manually
SVN-Revision: 11497
2008-06-16 12:38:55 +00:00
Imre Kaloz
983b22aa95 temporary hack to fixup the mach id for the wrt350nv2
SVN-Revision: 11459
2008-06-13 12:58:28 +00:00
Imre Kaloz
7bb65fb9d7 add preliminary Marvell Orion support
SVN-Revision: 11352
2008-06-04 13:51:17 +00:00