Felix Fietkau
4246c6a6b5
base-files: apply network interface settings such as macaddr, mtu and txqueuelen in prepare_interface instead of setup_interface. setting the mtu after the interface is up is unreliable on some drivers such as gianfar
...
SVN-Revision: 28297
2011-09-24 20:34:17 +00:00
Jo-Philipp Wich
41838f4585
base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3
...
SVN-Revision: 28291
2011-09-23 08:35:50 +00:00
Vasilis Tsiligiannis
98372a8eb5
base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured
...
SVN-Revision: 28241
2011-09-14 13:37:44 +00:00
Vasilis Tsiligiannis
200fd7bce1
Revert "[package] base-files: Add support for assigning multiple IPv6 addresses on an interface"
...
Multiple IPv6 addresses should be handled with alias sections
SVN-Revision: 28240
2011-09-14 13:37:40 +00:00
Vasilis Tsiligiannis
718c8ab940
base-files: Add support for assigning multiple IPv6 addresses on an interface
...
SVN-Revision: 28222
2011-09-12 21:07:00 +00:00
Felix Fietkau
dea36724a4
base-files: remove an old network tunable tweak which is messing up network stack performance on modern systems
...
SVN-Revision: 28126
2011-08-29 23:34:11 +00:00
Jo-Philipp Wich
aab33e2e9a
base-files: fix arp() procedure to properly detect /usr/bin/arp
...
SVN-Revision: 27965
2011-08-12 14:34:39 +00:00
Felix Fietkau
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
Jo-Philipp Wich
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
Jo-Philipp Wich
365f76551a
base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
...
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763 .
SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
Jo-Philipp Wich
0de28706ca
base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699 .
...
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
Jo-Philipp Wich
1e34c02e3e
base-files: add -h and --help options to sysupgrade ( #9728 )
...
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
Jo-Philipp Wich
e0e6d1029e
base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars ( #9711 )
...
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
Daniel Dickinson
1f69f4cf64
base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
...
SVN-Revision: 27501
2011-07-07 02:52:02 +00:00
Jo-Philipp Wich
32731a72c2
base-files: pass conloglevel to syslogd ( #9463 , #9647 )
...
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
Felix Fietkau
0a7a73261a
base-files: do not use the relinked libgcc, fixes c++ exception handling issues ( #9185 )
...
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
Jo-Philipp Wich
28fbd7470d
add gfortran compiler support ( #9600 , patch from Xiangfu Liu via Qi hardware)
...
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
Jo-Philipp Wich
344445715a
base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
...
SVN-Revision: 27147
2011-06-09 12:36:30 +00:00
Jo-Philipp Wich
fd8ec24187
base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
...
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
Jo-Philipp Wich
97ee10d691
base-files: fix error reporting for unsupported protocols on virtual interfaces
...
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
Felix Fietkau
9a227d88dd
base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
...
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
Felix Fietkau
60f66ded72
base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
...
SVN-Revision: 26990
2011-05-24 09:31:37 +00:00
Jo-Philipp Wich
9b8a5e604a
base-files: mark /etc/crontabs/ as config directory
...
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
Jo-Philipp Wich
ed8f726dab
ipcalc.sh CIDR notation Hi,
...
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
Jo-Philipp Wich
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
Gabor Juhos
3b1b49a49b
base-files: fix a typo in etc/banner
...
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
Jo-Philipp Wich
ff4203b9bd
base-files: cleanup permissions of device files in common hotplug rules ( #9211 )
...
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
Jo-Philipp Wich
144bee2090
base-files: fix stale space in eglibc library install section ( #9270 )
...
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
Jo-Philipp Wich
2f6361832e
base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
...
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
Vasilis Tsiligiannis
980190367c
base-files: Use -h instead of deprecated -L for symlink check
...
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
Vasilis Tsiligiannis
48465d3d63
base-files: fix minor problem in init.d/boot
...
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
Daniel Dickinson
d5542b4f59
block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
...
SVN-Revision: 26479
2011-04-05 12:12:57 +00:00
Felix Fietkau
e4e63b9c1b
base-files: bridge config, avoid having a random ipv6 ll address
...
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.
This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
SVN-Revision: 26426
2011-04-03 01:23:45 +00:00
Jo-Philipp Wich
fe8b9d5232
base-files: properly handle vlans on top of wireless interfaces
...
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
Felix Fietkau
a3b9971d84
base-files: overlayfs whiteouts depend on a specific xattr entry, which does not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2
...
SVN-Revision: 26208
2011-03-17 19:09:43 +00:00
Felix Fietkau
66bcd1d049
base-files: add initial support for mounting overlayfs
...
SVN-Revision: 26207
2011-03-17 19:09:39 +00:00
Jo-Philipp Wich
629e73938e
base-files: update sysctl.conf for modern kernels
...
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
Vasilis Tsiligiannis
1b66204ccd
base-files: Autodetect newly added wireless hardware
...
SVN-Revision: 26166
2011-03-15 00:44:15 +00:00
Felix Fietkau
4bcca969dc
base-files: link libpthread against libc
...
SVN-Revision: 26161
2011-03-14 19:27:45 +00:00
Felix Fietkau
71e83bd2e1
base-files: add a default /etc/services files
...
SVN-Revision: 26142
2011-03-13 19:47:42 +00:00
Felix Fietkau
c33f2efbb2
base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...)
...
SVN-Revision: 26138
2011-03-13 19:10:28 +00:00
Felix Fietkau
f5c130cfda
base-files: add an ftp group as well
...
SVN-Revision: 26136
2011-03-13 19:04:32 +00:00
Felix Fietkau
554cbe7f18
base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts
...
SVN-Revision: 26133
2011-03-13 18:56:34 +00:00
Felix Fietkau
e8491ab2a5
base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
...
SVN-Revision: 26003
2011-03-10 12:27:46 +00:00
Felix Fietkau
32d8fac477
base-files: only relink libraries if the linaro toolchain is selected
...
SVN-Revision: 25983
2011-03-09 20:36:29 +00:00
Felix Fietkau
e52b720870
gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
...
SVN-Revision: 25952
2011-03-08 13:10:11 +00:00
Felix Fietkau
357018e7e5
base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail ( fixes #8978 )
...
SVN-Revision: 25950
2011-03-08 12:48:36 +00:00
Felix Fietkau
0b9cfab2a2
base-files: fix Build/Compile override handling, fixes ar7 compile
...
SVN-Revision: 25911
2011-03-06 22:36:42 +00:00
Felix Fietkau
4e155b5283
base-files: do not build or use libgcc on m68k and avr32
...
SVN-Revision: 25852
2011-03-03 14:50:00 +00:00
Felix Fietkau
1cc0bcfffc
base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs
...
SVN-Revision: 25800
2011-03-01 05:40:38 +00:00