Commit graph

137 commits

Author SHA1 Message Date
Luka Perkov
67f1d364b8 base-files/busybox: move ntpd init script from base-files to busybox
SVN-Revision: 37383
2013-07-17 22:24:45 +00:00
John Crispin
8eb56a88a4 procd: add a small script that handles config reloads until configd is ready
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37248
2013-07-11 17:00:54 +00:00
John Crispin
8069d87d3c base-files: convert sysntpd init script to procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37244
2013-07-11 17:00:35 +00:00
John Crispin
523114e741 base-file: usbfs is no longer mounted under /proc/bus/usb
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37240
2013-07-11 17:00:17 +00:00
John Crispin
9e36e10cf7 base-files: add 2 missing variable defines
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37204
2013-07-08 16:35:02 +00:00
John Crispin
4c43cacce0 base-files: module loading is now handled by ubox/kmodloader
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37003
2013-06-21 16:53:59 +00:00
John Crispin
d0db343fc4 base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37002
2013-06-21 16:53:55 +00:00
Steven Barth
33c620773d base-files: remove unnecessary early sysctl-hack
SVN-Revision: 36920
2013-06-11 14:10:45 +00:00
John Crispin
811d90ff40 mount_root: prepare base-files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36429
2013-04-25 19:02:32 +00:00
John Crispin
39469dea7f boot: make use of kmodloader if it is available
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36428
2013-04-25 19:02:28 +00:00
Jo-Philipp Wich
6bddf226d3 base-files: move sysctl init after boot
SVN-Revision: 36131
2013-03-26 10:02:58 +00:00
Jo-Philipp Wich
7aace3ee3e base-files: fix bad start index in previous commit
SVN-Revision: 36130
2013-03-25 18:45:23 +00:00
Jo-Philipp Wich
acca7eadc4 package/base-files: change sysctl handling Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface.
SVN-Revision: 36129
2013-03-25 18:43:30 +00:00
John Crispin
f43b7934d2 make basefiles aware of procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36003
2013-03-13 18:11:19 +00:00
Steven Barth
92ad26d1b6 base-files: Fix IPv6 early sysctls again * Kernel IPv6 /proc interface inconsistency caused races
SVN-Revision: 35417
2013-02-01 12:28:24 +00:00
Steven Barth
ea7c9c85a8 base-files: Fix race-conditions with IPv6 sysctls
SVN-Revision: 35368
2013-01-29 10:13:33 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
Gabor Juhos
38fced86ee base-files: add support for the morse LED trigger
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).

Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34380
2012-11-25 17:20:49 +00:00
Florian Fainelli
d3f22617a2 base-files: skip LEDs handled by rssileds in led init-script
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger.
This doesn't harm as the kernel will refuse this setting, but it outputs some
ugly log-lines:
Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW
Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument
...

In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33717
2012-10-11 06:45:02 +00:00
Florian Fainelli
78f4cf3d70 base-files: release an attached loop device on umounting
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 33477
2012-09-19 15:13:44 +00:00
Jo-Philipp Wich
9ae901445b /etc/functions.sh => /lib/functions.sh
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
Jonas Gorski
80650c9475 base-files: wait for wifi modules to settle
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.

This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.

SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
Jo-Philipp Wich
3c4165a305 enable ntpd server for busybox
hi

Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1,  ntpd will answer with the time of the router)

I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)

 Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option?  Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

SVN-Revision: 31374
2012-04-20 15:05:38 +00:00
Felix Fietkau
5744d736f2 base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00
Felix Fietkau
a963a80a38 base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
SVN-Revision: 29862
2012-01-22 21:14:22 +00:00
Jo-Philipp Wich
9fd3886365 base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
SVN-Revision: 29806
2012-01-19 15:37:47 +00:00
Gabor Juhos
ff89832fdb package/base-files: add support for the switch LED trigger
SVN-Revision: 29629
2011-12-31 15:02:35 +00:00
Gabor Juhos
3f85c52a3a package/base-files: use case statement in led init script
SVN-Revision: 29628
2011-12-31 15:02:32 +00:00
Jo-Philipp Wich
33443d2a8c base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
SVN-Revision: 29204
2011-11-17 01:18:22 +00:00
Nicolas Thill
93886bc776 package/base-files: use new service wrapper
SVN-Revision: 28835
2011-11-07 22:58:34 +00:00
Felix Fietkau
44ba13b578 base-files: load modules early, run wifi detect afterwards and only then process uci defaults
this allows uci-defaults scripts to override wifi settings

SVN-Revision: 28733
2011-11-03 20:02:25 +00:00
Jo-Philipp Wich
272d95f0f1 base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system.
SVN-Revision: 28612
2011-10-27 00:21:53 +00:00
Felix Fietkau
c2b5767572 base-files: move network related scripts to a separate package to make the transition to netifd easier
SVN-Revision: 28495
2011-10-20 15:01:06 +00:00
Jo-Philipp Wich
bfbbe5893f base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
Jo-Philipp Wich
32731a72c2 base-files: pass conloglevel to syslogd (#9463, #9647)
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
Felix Fietkau
9a227d88dd base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
eliminates unnecessary flash write cycles at every boot

patch by Peter Wagner (tripolar)

SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
Jo-Philipp Wich
ba1c1e9016 base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
Vasilis Tsiligiannis
980190367c base-files: Use -h instead of deprecated -L for symlink check
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
Vasilis Tsiligiannis
48465d3d63 base-files: fix minor problem in init.d/boot
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.

Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
Vasilis Tsiligiannis
1b66204ccd base-files: Autodetect newly added wireless hardware
SVN-Revision: 26166
2011-03-15 00:44:15 +00:00
Florian Fainelli
d7fe921089 base-files: support port_state in led config (#6763)
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

SVN-Revision: 25172
2011-01-27 21:49:46 +00:00
Gabor Juhos
63c786dde7 base-files: add support for the usbdev LED trigger
SVN-Revision: 24647
2010-12-17 17:10:14 +00:00
Jo-Philipp Wich
c0820d3261 base-files: respect .auto option when running coldplug_interface_*() hooks on boot
SVN-Revision: 21588
2010-05-27 23:04:56 +00:00
Jo-Philipp Wich
6a3cbba92e base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot
SVN-Revision: 21389
2010-05-06 19:50:22 +00:00
Vasilis Tsiligiannis
a481cafb55 base-files: Remove redundant stopping of watchdog
busybox watchdog applet should stop the watchdog before shutting down

SVN-Revision: 21341
2010-05-03 10:56:58 +00:00
Florian Fainelli
20da5f495f add stop() to watchdog init script, patch from Yury Polyanskiy
SVN-Revision: 21334
2010-05-03 09:05:35 +00:00
Florian Fainelli
1847940688 Fix bug in foregrounding in /etc/init.d/rcS
Not using the config_xxx functions correctly.  Amended.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20928
2010-04-16 18:14:08 +00:00
Florian Fainelli
eafa2ec962 option to allow boot to run to completion before starting shell
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.

This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20841
2010-04-13 19:57:25 +00:00
Jo-Philipp Wich
10c00a6368 base-files: also regenerate wifi config if existing config contains only whitespace
SVN-Revision: 20669
2010-04-03 13:31:59 +00:00
Felix Fietkau
3ab30b486f base-files: reload switch settings on /etc/init.d/network start as well
SVN-Revision: 20232
2010-03-15 14:02:49 +00:00