Commit graph

35783 commits

Author SHA1 Message Date
Jo-Philipp Wich
18c622a1f2 ath25: rework image building
* Remove legacy macros
* Emit generic LZMA and Gzip kernel images from the combined device recipe
* Rename combined device to generic

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Jo-Philipp Wich
db49dd894e build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Jo-Philipp Wich
fccc4298df octeon: clean up image build code
Use the generic "sysupgrade-nand" build step to pack the sysupgrade file,
it performs the same steps as the inline "tar-file" macro.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Felix Fietkau
a1681ce39b dnsmasq: replace the iface hotplug script with a procd trigger
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
6916ca8d33 dnsmasq: make the check for existing DHCP servers more reliable
If there is no carrier yet, wait for 2 seconds (STP forwarding delay)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Ulrich Weber
712b6fdc5c dnsmasq: write atomic config file
multiple invocation of dnsmasq script (e.g. by procd and hotplugd)
might cause procd to restart dnsmasq with an incomplete config file.
Config file generation might take quite a long time on larger configs
due ubus calls for each listening interface...

Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
2016-07-29 16:41:09 +02:00
Felix Fietkau
d9ff187003 netifd: update to the latest version
Emits an initial event after the first link-up of a force_link
interface. This is needed for making the dnsmasq dhcp check more
reliable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
f88e3a4c0a procd: add default timeout for reload trigger actions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
c02f41c1d2 igmpproxy: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
8299737428 dropbear: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
88304ea6e5 sysntpd: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
8891d941e0 procd: rework trigger handling
Open/close triggers array around service_triggers call to make using
multiple triggers easier to deal with.
The API was quite confusing, because some functions contained implicit
trigger open/close calls and some didn't.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
eed30bc869 procd: update to the latest version
Fixes a long standing design issue in handling of delayed triggers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
11d47e615b libubox: update to the latest version, adds a few utility functions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
f4ce133ccf build: add option to enable all profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
76341cfc5f build: add support for per-device rootfs based on device profile packges
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
c0dceae4bb build: minor cleanup of redundant code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
653cb2594d build: set TMPDIR for opkg calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
c792c7512c build: add target_params variable for getting root filesystem image parameters
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
731b166528 build: add template for getting opkg package files from package names
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
5d30bf8303 build: rework opkg command invocation
Drop included $(XARGS), add support for passing target dir via parameter

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
37e82e4e42 build: remove obsolete variables from opkg command
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
7dffc32ffa build: rework prepare_rootfs to pass target dir via parameter
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
c5ca181d12 image: add wrapper variable to get the target dir for mkfs commands
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
4fed7a60f9 image: make mkfs template output to $@
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
973e6e1d71 build: move rootfs processing code to include/rootfs.mk so it can be reused later
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
119b4422f8 apm821xx: only attempt to mount /boot on MyBook Live
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:09 +02:00
Hauke Mehrtens
47cce1d5e4 lantiq: fix switch configuration for EASY80920
The device tree description misses some Ethernet ports and there was no
model specified for this board. In addition there was no switch
specific default configuration created.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-28 22:42:16 +02:00
Felix Fietkau
6b5a418512 kernel: fix crashlog issues on various architectures
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-28 21:26:37 +02:00
Felix Fietkau
eb28a0cde6 lantiq: fix WBMR-300HPD switch port assignment
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-28 21:25:42 +02:00
Jo-Philipp Wich
3bb2b46bc3 octeon: fix image build
After b47f438 "build: remove image prefix from kernel files in KDIR", the
kernel image in $(KDIR) has a different name and could not be found by the
tar-file build step anymore, leading to the following error on the build
servers:

  cp: cannot stat `.../linux-octeon/lede-octeon-generic-kernel.bin': No such file or directory
  make[4]: *** [.../linux-octeon/tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1

Adjust the path to the source kernel image in order to fix the problem.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-28 19:44:19 +02:00
Matthias Schiffer
adbbfb7ff9
ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator
The stock firmware uses the single LED as status indicator only. Using the
same LED both for status and as ethernet indicator is uncommon, and has
been confusing users who were using the device as a WLAN mesh node (so the
LED was just off, as no ethernet was connected).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-28 15:59:04 +02:00
Matthias Schiffer
500a67a167
ar71xx: add revision detection for D-Link DIR-505 A1/A2
The A1 image also works on the A2, correctly set AR71XX_MODEL in this case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-28 15:44:52 +02:00
Álvaro Fernández Rojas
c58ed54d8c brcmfmac43430-firmware: update to v7.45.41.26
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-07-28 15:17:48 +02:00
Rafał Miłecki
f6a86ba066 bcm53xx: enable kernel symbols/drivers needed for BCM53573
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 14:05:41 +02:00
Rafał Miłecki
2552e9319e bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 12:59:23 +02:00
Rafał Miłecki
a3be48593b bcm53xx: refresh kernel patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-28 12:45:02 +02:00
John Crispin
96fa9aa13b ar71xx: add a missing ;; to ar71xx.sh
commit 42305ae24a ("ar71xx: add support for gl-mifi")

was missing a ;; breaking boot up

Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 11:17:34 +02:00
Merlijn Wajer
4a0c4d8151 netifd: Use -x hostname:$hostname instead of -H
Passing the hostname is currently broken in since the shipped busybox includes this commit:
https://git.busybox.net/busybox/commit/networking/udhcp/dhcpc.c?id=2017d48c0d70bef8768efb42909e605ea8eb5a21

Before:

    Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is now down
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is setting up now
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: option -h NAME is deprecated, use -x hostname:NAME
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: malformed hex string 'WR150'

After:

    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): udhcpc (v1.23.2) started
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending discover...
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending select for xxx.yyy.zzz.xyz...
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Lease of xxx.yyy.zzz.xyz obtained, lease time 600

Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
2016-07-24 06:59:55 +02:00
Conn O'Griofa
e1406cd31a base-files: sysupgrade: fix pseudobridge upgrades
Treat 'relayd' as an essential service to avoid connection interruptions during sysupgrade on devices configured as a pseudobridge.

Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
2016-07-24 06:54:40 +02:00
Rafał Miłecki
846eca673f b53: allow ports with higher numbers than CPU port
Our code was assuming CPU port uses the highest number. My BCM53573
device has eth0 connected to port 8 and eth1 connected to port 5. While
working on support for it I tried to:
1) Enable all ports (including port 8)
2) Set CPU port to 5

I noticed port 8 is not accessible anymore. It was just a development
process but it seems like something worth fixing anyway.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-07-24 06:38:30 +02:00
dani
cea917c30b brcm63xx: fix HG556a C button
One button of the HG556a-C has the wrong GPIO pin defined in the dts file,
fix it

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
2016-07-24 06:38:30 +02:00
John Crispin
30d35181cd mountd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:30 +02:00
John Crispin
74766f4c4f firewall3: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:30 +02:00
John Crispin
b15f41d4d6 ugps: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:30 +02:00
P.Wassi
525b9edc8a ramips: unify etc/board.d/01_leds configuration
Introduce an optional parameter at the local set_usb_led and
set_wifi_led function such that they can take a triggering
device. If no parameter is passed, behaviour is unchanged.
Signed-off-by: P.Wassi <p.wassi@gmx.at>
2016-07-24 06:38:30 +02:00
Zhao Gang
42305ae24a ar71xx: add support for gl-mifi
This add initial support for gl-mifi.
Product page: http://www.gl-inet.com/mifi/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-24 06:38:30 +02:00
Michael Lee
0d5277f73f ramips: dch-m225 don't have ethernet. default enable wifi
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-07-24 06:38:30 +02:00
Paul Wassi
104114fe00 ramips: remove indentation in etc/board.d/01_leds
Remove indentation at end of line in base-files/etc/board.d/01_leds
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-07-24 06:38:29 +02:00
John Crispin
6674006bd0 ramips: add missing i2s alias
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:29 +02:00