Gabor Juhos
38fced86ee
base-files: add support for the morse LED trigger
...
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34380
2012-11-25 17:20:49 +00:00
Florian Fainelli
d3f22617a2
base-files: skip LEDs handled by rssileds in led init-script
...
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger.
This doesn't harm as the kernel will refuse this setting, but it outputs some
ugly log-lines:
Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW
Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument
...
In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33717
2012-10-11 06:45:02 +00:00
Imre Kaloz
c5e5e70ab0
it's time to break the barriers
...
SVN-Revision: 33666
2012-10-08 13:12:37 +00:00
Felix Fietkau
c7c649126f
base-files: remove obsolete entries from sysctl.conf ( #12236 )
...
SVN-Revision: 33532
2012-09-24 15:24:01 +00:00
Florian Fainelli
78f4cf3d70
base-files: release an attached loop device on umounting
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 33477
2012-09-19 15:13:44 +00:00
Jo-Philipp Wich
2165240c32
base-files: make file compare silent in migrate-sysctl
...
SVN-Revision: 33449
2012-09-17 18:36:51 +00:00
Jo-Philipp Wich
0fd1fb6252
base-files: add uci-defaults script to migrate sysctl.conf ( #12196 )
...
SVN-Revision: 33448
2012-09-17 17:15:56 +00:00
Florian Fainelli
31e46b4293
base-files: check for ldd presence and executability ( #11991 )
...
SVN-Revision: 33057
2012-08-08 15:37:34 +00:00
Florian Fainelli
6afd1725f1
base-files: fix detection of standalone ldd
...
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 32891
2012-07-27 15:35:00 +00:00
Vasilis Tsiligiannis
9ab1df3f48
base-files: Modernize hotplug2 rules ( #11368 )
...
SVN-Revision: 32711
2012-07-14 19:59:44 +00:00
Felix Fietkau
6c2a295245
base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)
...
A year of testing in the cerowrt project shows not using timestamps
to be a very bad idea in nearly any TCP at speeds above a few Mbit.
Lastly sack/dsack help on recovery from larger amounts of packet
loss.
SVN-Revision: 32513
2012-06-27 22:32:44 +00:00
Jo-Philipp Wich
bfe966574f
base-files: enable shell tracing in initscripts when INIT_TRACE is set
...
SVN-Revision: 32340
2012-06-13 17:10:41 +00:00
Jo-Philipp Wich
5e84df6bac
base-files: ship a static initial shadow db instead of creating it from passwd with sed, this fixes registering of users at compile time
...
SVN-Revision: 32064
2012-06-05 17:48:41 +00:00
Jo-Philipp Wich
9ae901445b
/etc/functions.sh => /lib/functions.sh
...
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
Jonas Gorski
80650c9475
base-files: wait for wifi modules to settle
...
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.
This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.
SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
Jo-Philipp Wich
3c4165a305
enable ntpd server for busybox
...
hi
Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router)
I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option? Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
SVN-Revision: 31374
2012-04-20 15:05:38 +00:00
Jo-Philipp Wich
b4312a8ba1
base-files: reformat banner to better work with varying version string lengths, do not set image options if menu is disabled ( #11280 )
...
SVN-Revision: 31289
2012-04-15 15:21:55 +00:00
Jo-Philipp Wich
a43ae30e1b
include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner
...
The available placeholders are:
%D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt"
%d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt")
%N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment")
%n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment")
%V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262")
%v .. Like %V, but all characters made lowercase and spaces substituted with "_"
%C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge"
%c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge")
%U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages "
%R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c")
%T .. Replace with the current target (e.g. "ar71xx")
%S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le")
SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
Felix Fietkau
6f46704743
base-files: split service related functions off to /lib/functions/service.sh
...
SVN-Revision: 31042
2012-03-20 14:29:50 +00:00
Jo-Philipp Wich
5fdd1f4bd7
Add munin to /etc/services
...
The muninlite postinst fails to add munin to /etc/services.
This patch removes this broken postinst and add an entry for munin in
/etc/services. This should have been done when the rest of the
/etc/services postinsts were being removed (changesets 26142-26149).
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 30982
2012-03-18 19:41:57 +00:00
Felix Fietkau
5744d736f2
base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
...
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00
Jo-Philipp Wich
086cae30ce
base-files: enable conntrack accounting in sysctl. It used to be a compile time option which got deprecated
...
SVN-Revision: 30805
2012-03-04 14:53:17 +00:00
Jo-Philipp Wich
6b9bf71881
base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed
...
SVN-Revision: 29865
2012-01-22 22:25:42 +00:00
Felix Fietkau
a963a80a38
base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
...
SVN-Revision: 29862
2012-01-22 21:14:22 +00:00
Jo-Philipp Wich
9fd3886365
base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
...
SVN-Revision: 29806
2012-01-19 15:37:47 +00:00
Gabor Juhos
ff89832fdb
package/base-files: add support for the switch LED trigger
...
SVN-Revision: 29629
2011-12-31 15:02:35 +00:00
Gabor Juhos
3f85c52a3a
package/base-files: use case statement in led init script
...
SVN-Revision: 29628
2011-12-31 15:02:32 +00:00
Jo-Philipp Wich
33443d2a8c
base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
...
SVN-Revision: 29204
2011-11-17 01:18:22 +00:00
Jo-Philipp Wich
8b20bfafdf
base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935.
...
SVN-Revision: 29130
2011-11-14 19:02:01 +00:00
Imre Kaloz
28039aea90
nuke another 2.4 skeleton
...
SVN-Revision: 28937
2011-11-10 13:39:06 +00:00
Imre Kaloz
55ac529951
the empty root password should be empty ;)
...
SVN-Revision: 28935
2011-11-10 12:47:50 +00:00
Jo-Philipp Wich
be49daffc8
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
Nicolas Thill
d0659ce37e
package/base-files: move service* functions from /etc/rc.common to /lib/functions.sh
...
SVN-Revision: 28864
2011-11-08 22:47:41 +00:00
Nicolas Thill
b6aef59ea8
package/base-files: move /etc/functions.sh to /lib/functions.sh
...
SVN-Revision: 28857
2011-11-08 14:14:29 +00:00
Nicolas Thill
93886bc776
package/base-files: use new service wrapper
...
SVN-Revision: 28835
2011-11-07 22:58:34 +00:00
Nicolas Thill
10a03275bf
package/base-files: /etc/rc.common: add service wrapper around start-stop-daemon
...
SVN-Revision: 28834
2011-11-07 22:58:27 +00:00
Nicolas Thill
8413e90418
package/base-files: /etc/passwd: fix uid number for user 'daemon' (conflicting with user 'nobody')
...
SVN-Revision: 28799
2011-11-07 11:02:55 +00:00
Felix Fietkau
248ab4ac2f
base-files: process platform hotplug calls in the early launch of hotplug2 to avoid having crda calls get stuck at boot time ( fixes #10350 , #10354 )
...
SVN-Revision: 28768
2011-11-05 17:16:01 +00:00
Felix Fietkau
44ba13b578
base-files: load modules early, run wifi detect afterwards and only then process uci defaults
...
this allows uci-defaults scripts to override wifi settings
SVN-Revision: 28733
2011-11-03 20:02:25 +00:00
Jo-Philipp Wich
272d95f0f1
base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system.
...
SVN-Revision: 28612
2011-10-27 00:21:53 +00:00
Felix Fietkau
c2b5767572
base-files: move network related scripts to a separate package to make the transition to netifd easier
...
SVN-Revision: 28495
2011-10-20 15:01:06 +00:00
Jo-Philipp Wich
bfbbe5893f
base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
...
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
Felix Fietkau
dea36724a4
base-files: remove an old network tunable tweak which is messing up network stack performance on modern systems
...
SVN-Revision: 28126
2011-08-29 23:34:11 +00:00
Jo-Philipp Wich
aab33e2e9a
base-files: fix arp() procedure to properly detect /usr/bin/arp
...
SVN-Revision: 27965
2011-08-12 14:34:39 +00:00
Felix Fietkau
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
Jo-Philipp Wich
e0e6d1029e
base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars ( #9711 )
...
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
Daniel Dickinson
1f69f4cf64
base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
...
SVN-Revision: 27501
2011-07-07 02:52:02 +00:00
Jo-Philipp Wich
32731a72c2
base-files: pass conloglevel to syslogd ( #9463 , #9647 )
...
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
Felix Fietkau
9a227d88dd
base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
...
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
Jo-Philipp Wich
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
Gabor Juhos
3b1b49a49b
base-files: fix a typo in etc/banner
...
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
Jo-Philipp Wich
ff4203b9bd
base-files: cleanup permissions of device files in common hotplug rules ( #9211 )
...
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
Vasilis Tsiligiannis
980190367c
base-files: Use -h instead of deprecated -L for symlink check
...
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
Vasilis Tsiligiannis
48465d3d63
base-files: fix minor problem in init.d/boot
...
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
Daniel Dickinson
d5542b4f59
block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
...
SVN-Revision: 26479
2011-04-05 12:12:57 +00:00
Jo-Philipp Wich
fe8b9d5232
base-files: properly handle vlans on top of wireless interfaces
...
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
Jo-Philipp Wich
629e73938e
base-files: update sysctl.conf for modern kernels
...
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
Vasilis Tsiligiannis
1b66204ccd
base-files: Autodetect newly added wireless hardware
...
SVN-Revision: 26166
2011-03-15 00:44:15 +00:00
Felix Fietkau
71e83bd2e1
base-files: add a default /etc/services files
...
SVN-Revision: 26142
2011-03-13 19:47:42 +00:00
Felix Fietkau
c33f2efbb2
base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...)
...
SVN-Revision: 26138
2011-03-13 19:10:28 +00:00
Felix Fietkau
f5c130cfda
base-files: add an ftp group as well
...
SVN-Revision: 26136
2011-03-13 19:04:32 +00:00
Felix Fietkau
554cbe7f18
base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts
...
SVN-Revision: 26133
2011-03-13 18:56:34 +00:00
Jo-Philipp Wich
73468de8d1
base-files: fix sysctl handling, do not react on fake ifaces in route hotplug handler
...
SVN-Revision: 25713
2011-02-25 22:44:37 +00:00
Imre Kaloz
e4589a2e5f
it's time for some attitude adjustment ;)
...
SVN-Revision: 25514
2011-02-13 11:20:09 +00:00
Jo-Philipp Wich
74ab5be3d7
base-files: remove ptbtime3 rdate server, its dead
...
SVN-Revision: 25479
2011-02-12 17:54:01 +00:00
Jo-Philipp Wich
8b1b99ba73
base-files: update rdate server list
...
SVN-Revision: 25478
2011-02-12 17:46:36 +00:00
Jo-Philipp Wich
875ff44592
base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others
...
SVN-Revision: 25454
2011-02-11 00:39:11 +00:00
Vasilis Tsiligiannis
d063af3fcf
base-files: Add include for target specific hotplug rules
...
SVN-Revision: 25415
2011-02-07 22:28:09 +00:00
Michael Büsch
99c66237f0
hotplug2 rules: Run /etc/hotplug.d/firmware/ scripts (if any) on firmware load events
...
SVN-Revision: 25383
2011-02-06 14:35:07 +00:00
Jo-Philipp Wich
3d82109add
base-files: don't stop hotplug events for ppp interfaces, similar fix like the earlier one for tun/tap interfaces
...
SVN-Revision: 25355
2011-02-03 22:43:11 +00:00
Jo-Philipp Wich
79b22b246b
base-files: make the skipping of ppp interfaces in 10-net hotplug more explicit, this allows users to rely on hotplug events for ppp0 .. ppp9 interfaces spawned by other programs
...
SVN-Revision: 25354
2011-02-03 22:34:30 +00:00
Vasilis Tsiligiannis
bd8a1549eb
base-files: Fix alsa raw audio device hotplug rule
...
SVN-Revision: 25301
2011-02-02 01:23:34 +00:00
Vasilis Tsiligiannis
824331a594
hotplug2: Use stricter matching for rule regular expressions
...
SVN-Revision: 25282
2011-02-01 16:37:53 +00:00
Vasilis Tsiligiannis
3a3d95b191
base-files: Remove deprecated hotplug2 commands, update old commands to new
...
SVN-Revision: 25268
2011-01-31 22:29:31 +00:00
Florian Fainelli
d7fe921089
base-files: support port_state in led config ( #6763 )
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 25172
2011-01-27 21:49:46 +00:00
Gabor Juhos
63c786dde7
base-files: add support for the usbdev LED trigger
...
SVN-Revision: 24647
2010-12-17 17:10:14 +00:00
Felix Fietkau
5a351509aa
base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
...
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
Jo-Philipp Wich
9a996248d4
base-files: derive connect_time from uptime as local system time may warp due to rdate, ntp and other means
...
SVN-Revision: 24212
2010-12-01 19:55:24 +00:00
Jo-Philipp Wich
a8c3d1ab6d
base-files: save the connect time of interfaces in uci state
...
SVN-Revision: 24206
2010-12-01 17:37:32 +00:00
Jo-Philipp Wich
d80f82d7a4
base-files: - add sysupgrade support for keepfile hints * introduces /lib/upgrade/keep.d/ for per-package keepfile lists * introduces /etc/sysupgrade.conf for user defined keepfile hints - prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg - change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and opkg list-changed-conffiles
...
SVN-Revision: 23258
2010-10-05 19:24:12 +00:00
Daniel Dickinson
18b473ca9b
base/block-extroot, base/block-mount: Modified preinit and block-extroot and block-mount so that use of block-mount and block-extroot do not require that block-extroot, block-mount, nor the kernel modules they depend, on are required to included in the image. That is block-extroot and dependencies may now be installed as modules onto the jffs2 part of a squashfs system and it will work. In addition packages which are installed into the jffs2 of a squashfs system may now affect preinit, so long as they do not require execution of commands that occur before the merging of the jffs2 and built-in (squashfs) preinit scripts is done.
...
Thanks jow for the preinit merge stuff!
SVN-Revision: 23110
2010-09-23 13:58:05 +00:00
Jo-Philipp Wich
4815de3f26
base-files: introduce service_kill() into functions.sh - a convenience wrapper for killing services by pid or pidfile with a grace period for termination before kill
...
SVN-Revision: 23087
2010-09-19 14:03:32 +00:00
Jo-Philipp Wich
63991ba875
base-files, uci: properly revert list state on config_load This fixes a bug where lists end up with duplicate values if config_load was invoked multiple times.
...
SVN-Revision: 22629
2010-08-14 00:45:15 +00:00
Hamish Guthrie
cbc8b3968c
base_files: Remove . from end of localhost entry
...
SVN-Revision: 22508
2010-08-06 08:00:40 +00:00
Jo-Philipp Wich
506db2a57e
base-files: add "mtu" option for route sections, allows setting per-route mtu values
...
SVN-Revision: 22003
2010-06-30 23:46:34 +00:00
Jo-Philipp Wich
ce5d644ac1
base-files: enable IPv6 forwarding by default since the default firewall supports ip6tables now
...
SVN-Revision: 21766
2010-06-12 16:59:12 +00:00
Jo-Philipp Wich
94db915196
base-files: - add aliases to device by default (not ifname) - introduce option "layer" to select the target ifname to attach the alias to: - 3 use tun device (tun over bridge over device) fallback to bridge or device - 2 use bridge (bridge over device) fallback to device - 1 use device
...
SVN-Revision: 21655
2010-06-02 00:22:13 +00:00
Jo-Philipp Wich
75941a19ac
base-file: move alias setup to route hotplug, this fixes alias sections for non-static interfaces like ppp, dhcp, 6in4 etc.
...
SVN-Revision: 21652
2010-06-01 21:43:52 +00:00
Jo-Philipp Wich
c14e8be337
base-files: don't skip subsequent hotplug rules when doing makedev for tun or tap interfaces - this fixes support for uci managed OpenVPN interfaces and other externally created tuntap devices
...
SVN-Revision: 21641
2010-05-31 01:22:36 +00:00
Jo-Philipp Wich
8bc961239b
base-files: 3g connection interfaces are now called "3g-*" - adjust 10-net hotplug handler to match them
...
SVN-Revision: 21591
2010-05-28 00:35:54 +00:00
Jo-Philipp Wich
c0820d3261
base-files: respect .auto option when running coldplug_interface_*() hooks on boot
...
SVN-Revision: 21588
2010-05-27 23:04:56 +00:00
Jo-Philipp Wich
da55c9639a
base-files ( #7316 ) - improve rdate reliability - make rdate config more ntp like - move time server list to /etc/config/timeserver - bump package revision
...
SVN-Revision: 21495
2010-05-17 19:54:35 +00:00
Jo-Philipp Wich
ea06a67eac
base-files: use uci_get() wrapper ( #7312 )
...
SVN-Revision: 21490
2010-05-17 19:34:08 +00:00
Jo-Philipp Wich
6a3cbba92e
base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot
...
SVN-Revision: 21389
2010-05-06 19:50:22 +00:00
Felix Fietkau
f9591d229a
base-files: do not bring up wlan interfaces from hotplug events, so that wrong network/wireless configs are more noticeable
...
SVN-Revision: 21379
2010-05-05 15:56:58 +00:00
Vasilis Tsiligiannis
a481cafb55
base-files: Remove redundant stopping of watchdog
...
busybox watchdog applet should stop the watchdog before shutting down
SVN-Revision: 21341
2010-05-03 10:56:58 +00:00
Florian Fainelli
20da5f495f
add stop() to watchdog init script, patch from Yury Polyanskiy
...
SVN-Revision: 21334
2010-05-03 09:05:35 +00:00
Florian Fainelli
1847940688
Fix bug in foregrounding in /etc/init.d/rcS
...
Not using the config_xxx functions correctly. Amended.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20928
2010-04-16 18:14:08 +00:00
Florian Fainelli
eafa2ec962
option to allow boot to run to completion before starting shell
...
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.
This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20841
2010-04-13 19:57:25 +00:00
Florian Fainelli
135c4b8d05
add debugging entry to hotplug config
...
This is useful for seeing what devices are detected by the system.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20785
2010-04-10 18:35:14 +00:00
Vasilis Tsiligiannis
a1e4c66c16
base-files: Use hotplug2 to download firmware
...
SVN-Revision: 20683
2010-04-03 18:21:02 +00:00
Jo-Philipp Wich
10c00a6368
base-files: also regenerate wifi config if existing config contains only whitespace
...
SVN-Revision: 20669
2010-04-03 13:31:59 +00:00
Nicolas Thill
b34bba25d2
base-files: fix shell syntax (prevent error messages when activating initscripts in IB)
...
SVN-Revision: 20571
2010-03-29 03:58:17 +00:00
Jo-Philipp Wich
63f49e43e6
base-files: add a hotplug handler for rdate
...
SVN-Revision: 20518
2010-03-27 17:13:33 +00:00
Felix Fietkau
3ab30b486f
base-files: reload switch settings on /etc/init.d/network start as well
...
SVN-Revision: 20232
2010-03-15 14:02:49 +00:00
Nicolas Thill
d08b2b02cf
base-files: fix preinit code typos
...
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
Acked-by: Daniel Dickinson <cshore@csolve.net>
SVN-Revision: 20124
2010-03-10 18:09:53 +00:00
Felix Fietkau
bfeb96126d
add the block-mount package by Daniel Dickinson (cshore), replacing existing automount functionality
...
SVN-Revision: 19877
2010-02-26 22:45:39 +00:00
Jo-Philipp Wich
2e0d14f9c2
base-files: add /dev/hvcX to hotplug common rules
...
SVN-Revision: 19608
2010-02-12 18:57:01 +00:00
Travis Kemen
9e5844fda2
Here is LVM support for OpenWRT. It introduces 3 new packages: - kmod-dm for the device mapper kernel module. - kmod-libdevmapper for the device-mapper library. - kmod-lvm2 for the lvm tool. Note that it currently does not create the symlinks for all the lvm tools, so you have to use lvm pvs rather than just pvs. Thanks Stefan Monnier
...
SVN-Revision: 19595
2010-02-12 01:37:02 +00:00
Lars-Peter Clausen
275b0d8cd4
Don't do lazy unmounting of filessystems at reboot/poweroff. It is unneeded and could couse a broken filesystem if unmounting takes to long. Thanks to Peter Wagner
...
SVN-Revision: 19568
2010-02-09 18:07:36 +00:00
Felix Fietkau
10ec4fa292
when rebooting, use lazy umounts as fallback (patch by puchu)
...
SVN-Revision: 19429
2010-01-30 18:17:57 +00:00
Felix Fietkau
541725ce18
stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu)
...
SVN-Revision: 19428
2010-01-30 18:17:52 +00:00
Felix Fietkau
d46a32fa60
when rebooting, stop the network interfaces last (just before umount) to allow services to shut down properly (thx, puchu)
...
SVN-Revision: 19427
2010-01-30 18:17:48 +00:00
Felix Fietkau
a254a9ff08
base-files: do not warn about nonexistant sysctl overrides (some of them are config dependent)
...
SVN-Revision: 19375
2010-01-29 02:17:11 +00:00
Felix Fietkau
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
Jo-Philipp Wich
3634de3b80
base-files: try to activate hotplugged partitions as swap and fall back to lazy mount ( #6517 )
...
SVN-Revision: 19300
2010-01-23 21:58:01 +00:00
Jo-Philipp Wich
bf9917d651
base-files: disable bridge firewalling by default
...
SVN-Revision: 19214
2010-01-18 05:38:44 +00:00
Felix Fietkau
8ec79b460c
run led init after /etc/init.d/done to keep the configured led settings active after the system has finished booting Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
...
SVN-Revision: 19050
2010-01-06 02:34:20 +00:00
Felix Fietkau
91a8f2334a
add missing argument to debug/mount wrappers (thx, matteo)
...
SVN-Revision: 18718
2009-12-09 17:13:16 +00:00
Felix Fietkau
889532d1fd
do not start multiple subshells for applying /etc/uci-defaults. use sh -x for hush compatibility
...
SVN-Revision: 18717
2009-12-09 15:15:25 +00:00
Felix Fietkau
f1649982e2
functions.sh: use functions instead of aliases for the debug, mount wrappers - hush does not have aliases
...
SVN-Revision: 18715
2009-12-09 13:36:43 +00:00
Felix Fietkau
e39038f688
mount debugfs by default
...
SVN-Revision: 18502
2009-11-23 20:35:05 +00:00
Jo-Philipp Wich
cfe1bc11ad
base-files: only try to execute watchdog if binary is present
...
SVN-Revision: 18102
2009-10-20 17:07:08 +00:00
Jo-Philipp Wich
f44e4dcb4b
base-files: add hotplug rules for /dev/lpX ( #863 )
...
SVN-Revision: 17792
2009-09-28 20:05:50 +00:00
Nicolas Thill
6478e24f7d
accommodate for 5 digits svn revisions :)
...
SVN-Revision: 17670
2009-09-22 03:05:45 +00:00
Jo-Philipp Wich
bdaeaafbef
base-files: introduce a ready-to-use /etc/rc.local to let users run custom commands on init without creating custom init scripts
...
SVN-Revision: 17571
2009-09-11 21:35:03 +00:00
Felix Fietkau
91d40a14af
Revert "fix nonhotpluggable networks not being brought up. Closes #2781 " (r17527) until we've solved the race conditions it creates
...
SVN-Revision: 17544
2009-09-09 00:16:55 +00:00
Travis Kemen
27915ac778
fix nonhotpluggable networks not being brought up. Closes #2781
...
SVN-Revision: 17527
2009-09-06 17:02:14 +00:00
Gabor Juhos
f494bcc222
package/base-files: set state to 'preinit' before preinit.arch is used, and set state to 'failsafe' when entering failsafe mode
...
SVN-Revision: 17517
2009-09-05 18:44:48 +00:00
Felix Fietkau
7d67818ab1
Revert "add ifup -a to boot(), closes #4543 #2781 " (r17515) Hotpluggable interfaces are already brought up before /etc/init.d/network boot and this change can break them, if the ifup -a command runs at the wrong time, also starts many interfaces twice, which can lead to issues with PPPoE.
...
SVN-Revision: 17516
2009-09-05 13:05:59 +00:00
Travis Kemen
1776830e64
add ifup -a to boot(), closes #4543 #2781
...
SVN-Revision: 17515
2009-09-05 05:33:23 +00:00
Travis Kemen
4c47562a37
extend logging functions
...
SVN-Revision: 17514
2009-09-04 21:09:13 +00:00
Felix Fietkau
6155fdf5d3
preinit: fix failsafe mode through ctrl+c on devices that do not provide a preinit.arch file
...
SVN-Revision: 17470
2009-09-02 15:14:53 +00:00
Geoff Levand
525d86686e
udev: Update udev package from udev-106 to udev-142
...
Update the init scripts have to use udevadm where appropriate.
The udev package no longer provides separate udev utilities
like udevtrigger and udevsettle. These have been incorporated
into the udev admin program udevadm.
Replace the udevextras sub package with config options to the udev
package.
Update the preinit script to check for '/lib/udev/devices', and
copy it to '/dev/ if it is found, then to conditionaly setup
/dev the old way with mknod etc. Udev now recommends using
the directory '/lib/udev/devices' to initialize the '/dev'
directory at startup.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 17378
2009-08-24 20:19:26 +00:00
Jo-Philipp Wich
27da9d1984
base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured ( #5356 )
...
SVN-Revision: 17217
2009-08-10 23:48:10 +00:00
Felix Fietkau
7c32f45749
base-files: clean up init.d/fstab and port it to the new config_get
...
... also remove the unused noauto variable in swapon.
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17159
2009-08-07 00:08:01 +00:00
Felix Fietkau
ae0745e240
base-files: port init.d/led to new config_get
...
... and don't call logger directly, rcS takes care of the correct redirection
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17158
2009-08-07 00:07:56 +00:00
Felix Fietkau
2892e2f1d5
base-files: port init.d/boot to new config_get
...
... and localize some variables.
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17157
2009-08-07 00:07:51 +00:00
Felix Fietkau
387b221aa1
base-files: port functions.sh to new config_get
...
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17156
2009-08-07 00:07:46 +00:00
Felix Fietkau
4dbaccf0cd
base-files: allow default value for config_get
...
Signed-off-by: Malte S. Stretz <mss@apache.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 17155
2009-08-07 00:07:42 +00:00
Florian Fainelli
de3a491240
simplify action handling in rc.common ( #5558 )
...
SVN-Revision: 17012
2009-07-26 12:34:09 +00:00
Felix Fietkau
038807906f
change sysctl.conf to disable tcp ecn by default (based on discussion with marek who stumbled upon this, it creates hard-to-debug connectivity issues with providers/servers that still use buggy equipment)
...
SVN-Revision: 16499
2009-06-17 21:57:07 +00:00
Hamish Guthrie
590f3042fb
Removed extra ; in exec rule
...
SVN-Revision: 16243
2009-06-01 08:48:37 +00:00
Florian Fainelli
0be2193e40
fix drivers firmware loading with the new hotplug2, patch from Russell Senior
...
SVN-Revision: 16231
2009-05-31 12:08:15 +00:00
Gabor Juhos
9b5e65f101
base-files: set rules file for hotplug2 in the boot script ( closes #5235 )
...
SVN-Revision: 16215
2009-05-30 17:09:41 +00:00
Gabor Juhos
463a6f4bda
base-files: update command line for the new hotplug2
...
SVN-Revision: 16154
2009-05-28 18:48:54 +00:00
Felix Fietkau
cbd52550bd
rcS: wait for init scripts to complete before initiating the shutdown (patch from #5032 )
...
SVN-Revision: 15530
2009-04-30 22:59:18 +00:00
Jo-Philipp Wich
1c41493d74
base-files: make diag.sh stub working in bash
...
SVN-Revision: 15527
2009-04-30 21:00:57 +00:00
Nicolas Thill
2fdeecdb47
add an explicit 'sysinit' tag for logging initscripts output, instead of '' that was logged as is
...
SVN-Revision: 15323
2009-04-21 12:02:34 +00:00
Jo-Philipp Wich
f40eaba4df
fix broken logic in r15272, r15273
...
SVN-Revision: 15274
2009-04-19 17:12:02 +00:00
Jo-Philipp Wich
b0ea64c211
base-files: ( #4928 ) handle "option gateway 0.0.0.0" and "option gateway interface" in route sections as "no gateway given" to allow defining gateway-less routes while still keeping the possibility to have static routes with a proper gateway on interfaces with# dynamic ips
...
SVN-Revision: 15272
2009-04-19 16:51:58 +00:00
Jo-Philipp Wich
a03e00bbcf
base-files: remove redundant netmask handling in 10-routes
...
SVN-Revision: 15219
2009-04-12 16:39:29 +00:00
Felix Fietkau
cf152cff39
tweak some sysctl values for better performance
...
SVN-Revision: 15129
2009-04-07 02:51:04 +00:00
Felix Fietkau
de0332f86a
rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway
...
SVN-Revision: 15097
2009-04-04 09:35:55 +00:00
Felix Fietkau
714ffa3260
fix failsafe mode
...
SVN-Revision: 15096
2009-04-04 09:35:49 +00:00
Michael Büsch
20b5626363
Allow running without "logger" installed
...
SVN-Revision: 14938
2009-03-18 13:05:18 +00:00
Michael Büsch
088ea2fb6e
Support configurations without syslogd/klogd.
...
SVN-Revision: 14937
2009-03-18 12:20:21 +00:00
Felix Fietkau
11cf9ea728
move input device nodes to /dev/input
...
SVN-Revision: 14809
2009-03-09 15:06:15 +00:00
Hauke Mehrtens
3ac154fc9c
On shutdown disabled every mounted swap device. Fixes #4721 Thanks to Angel Marin
...
SVN-Revision: 14770
2009-03-07 12:58:08 +00:00
Florian Fainelli
1716050f0c
allow specifying port where to log ( #2019 )
...
SVN-Revision: 14396
2009-02-03 20:26:00 +00:00
Jose Vasconcellos
58b8cdb5fd
Use block events for the mounting/unmounting of external storage devices. This handles both USB and IEEE1394 devices. It removes /sbin/usb-storage in favor of using the block hotplug event. There are dummy scripts to handle the plug in/out of USB and IEEE1394 devices for updating LEDs. Storage devices are mount as a sub-directory under /mnt.
...
SVN-Revision: 14289
2009-01-30 20:48:42 +00:00
Florian Fainelli
b065bc5310
increase default size of the connection tracking table, thanks Marc
...
SVN-Revision: 14283
2009-01-30 14:13:09 +00:00
Felix Fietkau
6d27b16e2b
fix $HOME in /etc/profile ( #4424 )
...
SVN-Revision: 13914
2009-01-07 04:38:57 +00:00
Jo-Philipp Wich
341c1dbdf5
package/base-files: fix chmod of /tmp/.uci, bump package revision
...
SVN-Revision: 13903
2009-01-06 21:53:45 +00:00
Jo-Philipp Wich
1cdaa2d3dc
allow ipv4 routes without gateway in configuration
...
SVN-Revision: 13714
2008-12-22 02:21:25 +00:00
Jo-Philipp Wich
7c4f0fcbe7
package/base-files: allow ipv6 routes without gateway specified
...
SVN-Revision: 13419
2008-11-28 22:45:16 +00:00
Felix Fietkau
5cc72a2874
fix up the network ifname in the network state when receiving iface/ifup events
...
SVN-Revision: 13399
2008-11-28 16:18:11 +00:00
Nicolas Thill
7218e6326f
make links to statup scripts in /etc/rc.d relative
...
SVN-Revision: 12659
2008-09-23 12:35:34 +00:00
Travis Kemen
91d3e6b05b
make option name optional
...
SVN-Revision: 12585
2008-09-13 00:08:39 +00:00
Felix Fietkau
2176ae1a6f
fix a race condition which would leave dnsmasq in infinite resolving recursion nirvana
...
SVN-Revision: 12424
2008-08-28 14:10:55 +00:00
John Crispin
12df593510
fixes broken if-then in led init script
...
SVN-Revision: 12411
2008-08-27 20:33:13 +00:00
Florian Fainelli
1673462564
Use busybox mount, could be overriden to use util-linux-ng for instance, thanks sn9
...
SVN-Revision: 12386
2008-08-25 05:21:42 +00:00
Felix Fietkau
8a08f95e42
upgrade to uci 0.5.0, adds list handling support
...
SVN-Revision: 12353
2008-08-20 15:38:51 +00:00
Nicolas Thill
257ee32b7d
disable ipv6 systcl call, as ipv6 is not enabled by default
...
SVN-Revision: 12351
2008-08-20 15:29:11 +00:00
Felix Fietkau
f27fd2ecc3
enable TCP ECN by default (see #3001 for more information)
...
SVN-Revision: 12334
2008-08-17 13:01:59 +00:00
Travis Kemen
99dd3e13fc
make opkg the default package manager, disable busybox ipkg from building by default
...
SVN-Revision: 12319
2008-08-16 06:35:14 +00:00
Florian Fainelli
38d1cb8cbd
Fix negative calculation of the tmpfs for devices with few RAM ( #3557 )
...
SVN-Revision: 12315
2008-08-14 22:21:35 +00:00
John Crispin
3403cbe948
remove /etc/functions.sh call from led hotplug script
...
SVN-Revision: 12312
2008-08-14 19:07:22 +00:00
Steven Barth
6b6d027172
added support for the timer-trigger to uci LED support
...
SVN-Revision: 12236
2008-08-07 11:01:46 +00:00
Mike Baker
1139608784
allow ctrl-c to trigger preinit
...
SVN-Revision: 12231
2008-08-07 07:17:03 +00:00
John Crispin
72396bd614
add uci led support - /etc/config/system can hold led info which is applied at boot - adds /sbin/led.sh to set/clear leds via a name defined in /etc/config/system
...
SVN-Revision: 12104
2008-08-04 22:56:46 +00:00
John Crispin
b73eedd62b
work aroung error message during boot if swapon is nt installed
...
SVN-Revision: 12087
2008-08-04 08:50:16 +00:00
Felix Fietkau
aee15469df
use the same hotplug2 parameters for initramfs and regular
...
SVN-Revision: 12059
2008-08-01 03:09:20 +00:00
Felix Fietkau
37c7e13a5f
move the hotplug2 kill command from preinit to /etc/init.d/boot, so that it works for initramfs as well
...
SVN-Revision: 12058
2008-08-01 03:01:42 +00:00
Felix Fietkau
6a4edcadc1
fix config_clear(), see #3054
...
SVN-Revision: 12036
2008-07-31 03:04:32 +00:00
Felix Fietkau
ee56e9ec59
network scripts: properly maintain the network state's list of assigned interfaces
...
SVN-Revision: 12026
2008-07-30 22:39:56 +00:00
Felix Fietkau
8c453b693c
functions.sh: add list_contains function for checking whether a list contains a specific element
...
SVN-Revision: 12025
2008-07-30 22:39:43 +00:00
Felix Fietkau
4d883da9bf
functions.sh: add a function for removing an item from a list in a shell variable
...
SVN-Revision: 12024
2008-07-30 20:35:22 +00:00
Andy Boyett
2ddbb426c8
Move packages lists to the ramdisk to save flash space - Lists now stored in /var/ipkg-lists/, `ipkg update' must be run after each boot before packages can be installed from feeds
...
SVN-Revision: 11982
2008-07-29 03:36:23 +00:00
Nicolas Thill
a760ff5861
fix variable names in tests
...
SVN-Revision: 11911
2008-07-22 21:19:05 +00:00
Yuji Mano
0b5f602421
Revert previous bad commit r11512
...
SVN-Revision: 11513
2008-06-16 19:37:00 +00:00
Yuji Mano
5ee48c0b00
Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory.
...
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11512
2008-06-16 19:14:13 +00:00
John Crispin
0bf765b362
system now knows which timezone it is in
...
SVN-Revision: 11445
2008-06-11 19:59:16 +00:00
John Crispin
51b28d44a9
use default gateway for routes that have no gw specified, Signed off by: Brian J. Murrell
...
SVN-Revision: 11380
2008-06-06 18:49:23 +00:00
Matteo Croce
ac8bf03f8e
create /etc/fstab on boot ( closes #3458 )
...
SVN-Revision: 11225
2008-05-20 19:02:19 +00:00
Matteo Croce
0a1c669ec1
fix some wrong paths
...
SVN-Revision: 11217
2008-05-19 22:08:46 +00:00
Rod Whitby
c715985c97
base-files: Update /etc/init.d/fstab with new location of swapon and swapoff (they moved from /sbin to /usr/sbin)
...
SVN-Revision: 11157
2008-05-17 00:13:05 +00:00
Ralph Hempel
6d4c89c7f5
adding check for /proc/net/vlan/config (==vlan enabled kernel)
...
SVN-Revision: 11132
2008-05-13 09:21:17 +00:00
John Crispin
1dce440fa5
revert borked commit
...
SVN-Revision: 11038
2008-05-03 20:28:13 +00:00
John Crispin
3141b38fd8
make etrax serial driver register its device nodes, so we get a console
...
SVN-Revision: 11037
2008-05-03 20:12:43 +00:00