Commit graph

36 commits

Author SHA1 Message Date
Andy Boyett
260aee67dc fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich
SVN-Revision: 18253
2009-11-01 01:09:56 +00:00
John Crispin
2d57b56bce make etehrent work on wrt350n, thx sn9
SVN-Revision: 18214
2009-10-29 21:26:36 +00:00
Felix Fietkau
43a802864a Fix Buffalo WBR-G54 and WBR-B11 support (updated patch)
Signed-off-by: Roger Hardiman <roger@rjh.org.uk>

SVN-Revision: 17598
2009-09-16 18:14:29 +00:00
Felix Fietkau
de0332f86a rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway
SVN-Revision: 15097
2009-04-04 09:35:55 +00:00
Felix Fietkau
f5fba5bc3c Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

SVN-Revision: 14624
2009-02-22 18:45:39 +00:00
Felix Fietkau
f47a4a58c5 fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86)
SVN-Revision: 12657
2008-09-23 11:05:54 +00:00
Gabor Juhos
9b2e1bdd8d fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788)
SVN-Revision: 11935
2008-07-26 16:10:44 +00:00
Felix Fietkau
9621d872ca (3/6) bcm57xx: preinit
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11468
2008-06-15 11:10:13 +00:00
Felix Fietkau
f9ad520e37 (2/6) bcm57xx: netconfig
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11467
2008-06-15 11:09:49 +00:00
Travis Kemen
0d25337129 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu>
SVN-Revision: 11070
2008-05-08 01:30:14 +00:00
Andy Boyett
c15de3860c Add support for the WL-500gP v2
SVN-Revision: 10693
2008-03-31 08:04:56 +00:00
Florian Fainelli
a4ca693c7e Add back Sitecom WL-105b support
SVN-Revision: 10142
2008-01-08 14:27:48 +00:00
Gabor Juhos
438dfe5c6f get rid of per-profile base-files
SVN-Revision: 9069
2007-09-29 14:27:54 +00:00
Gabor Juhos
a3c80a1e6e fix vlan configuration on Dell TrueMobile 2300
SVN-Revision: 9015
2007-09-25 08:34:30 +00:00
Florian Fainelli
1d7dc11649 Add preliminary support for sysupgrade on brcm
SVN-Revision: 8718
2007-09-09 19:18:02 +00:00
Mike Baker
c6e6780624 fix wan configuration on wr850g v2/v3
SVN-Revision: 8482
2007-08-25 12:27:01 +00:00
Felix Fietkau
114b9a8fb6 add failsafe support for atheros-2.6 (#1501) - only works with ar5315+ at the moment
SVN-Revision: 7870
2007-07-04 04:35:44 +00:00
Felix Fietkau
5e7cb507cd move parts of the failsafe code to the generic base-files - will be used on atheros as well as soon as i've added support for it
SVN-Revision: 7810
2007-06-30 21:09:02 +00:00
Felix Fietkau
8c41e51e92 fix failsafe on broadcom, send netlink events in diag when running linux 2.6
SVN-Revision: 7722
2007-06-25 08:32:25 +00:00
Mike Baker
3fda1fbf87 cleanup the broadcom preinit.arch
SVN-Revision: 7176
2007-05-10 16:29:15 +00:00
Mike Baker
4a41439c46 unified preinit environment
SVN-Revision: 7173
2007-05-10 14:37:47 +00:00
Felix Fietkau
bd65c8b91a broadcom: rename the OpenWrt partition to rootfs_data
SVN-Revision: 7171
2007-05-10 12:38:31 +00:00
Felix Fietkau
5b554fa8a4 bring up the ethernet driver before loading the switch drivers on broadcom (fixes #1520)
SVN-Revision: 7126
2007-05-07 17:37:05 +00:00
Felix Fietkau
ca7a815602 use hotplug2 for serializing hotplug events on 2.6
SVN-Revision: 7097
2007-05-05 18:33:18 +00:00
Florian Fainelli
2266aad2ec Limit the number of hotplug childrens
SVN-Revision: 6804
2007-04-01 18:30:32 +00:00
Felix Fietkau
65e59861ba fix up the netconfig script after the devfs=>hotplug2 migration
SVN-Revision: 6542
2007-03-09 18:20:54 +00:00
Felix Fietkau
275ff405d8 more hotplug2/mdev/devfs related fixups, this time for broadcom
SVN-Revision: 6519
2007-03-04 23:55:07 +00:00
Felix Fietkau
a44c286fdb nuke mdev and replace it with hotplug2 :)
SVN-Revision: 6512
2007-03-04 20:31:53 +00:00
Felix Fietkau
5acf90187b fix mdev for broadcom 2.6
SVN-Revision: 6484
2007-03-03 22:40:28 +00:00
Felix Fietkau
7b0de4ae45 replace some hardcoded /dev/mtdblock/* references with calls to find_mtd_part()
SVN-Revision: 6477
2007-03-03 19:22:41 +00:00
Tim Yardley
484609eeb0 commit profile support for base-files... patches still need to be done
SVN-Revision: 6465
2007-03-02 18:17:40 +00:00
Felix Fietkau
2fb06d46d9 Add WL-700gE support (based on work by jr) Includes kernel/diag patch and a new target profile
SVN-Revision: 6142
2007-01-20 12:35:00 +00:00
Felix Fietkau
040e093439 don't exit from failsafe mode after the console shell quits (some devices don't have /dev/console)
SVN-Revision: 6020
2007-01-07 17:38:29 +00:00
Felix Fietkau
5d22a52440 add a netconfig override for the wl-500g (fixes #1116)
SVN-Revision: 6016
2007-01-07 15:41:47 +00:00
Felix Fietkau
51078ecdac better network config support for bcm94704
SVN-Revision: 5775
2006-12-12 23:55:14 +00:00
Felix Fietkau
37362df7ea move platform specific base-files into target/linux/<targetname>
SVN-Revision: 5621
2006-11-22 23:27:29 +00:00